Channel Problem after Firmware Update + Subtitles?

Started by Keith, February 16, 2023, 03:29:22 PM

Previous topic - Next topic

Keith

Earlier this week I did the firmware update successfully for my IceBox as per instructions including the soft reset, forced update due to guide gaps and unplugging the unit from power (several times) but am missing most of my TV channels.
The IceTV Guide Settings on my computer shows 31 channels but only 14 are visible under "All Channels" on the IceBox. There are no Channel 7 channels at all. All channels were present prior to the update. As a result, only some of my programmes are now being recorded on the IceBox. I only use IceTV to set recordings.
How do I fix this?
I've gone back to using my old and dodgy Beyonwiz T2, which records all IceTV progammes and has subtitles, which I could never get to work on my IceBox recordings, a big negative for me. I know there are others who have posted about subtitles but I have not seen a fix.
I have turned on "prefer subtitles" in Expert Player Settings and also checked manually through the Menu button when playing recordings that Subtitles is on.
Thanks in advance for any assistance.

IanL-S

At the top of the EPG there is a series of TABs, one of which is All Channels, I assume there is not also one for 7 network.

From time to time I have had an incomplete service scan. If you are using the latest firmware you can do a soft reset.

Move to the Kodi navigation payne (left column), and down to Add-ons, then select IceBox Configuration. The "cursor" should be on System, move to the right, then move down to Reset System, then select Reset to System Defaults (soft reset), and select it. Your recordings will be retained and EPG and timers downloaded again during the process. The process should involve a scan of for available services, which should pickup the missing services. If it does not (and with earlier builds I have had that happen) you will need to do a hard-reset instead. Again recordings will be retaied and EPG data and timers will be downloaded duing the setup routine (including a full service scan).

EDIT: I do not have a solution to the (very annoying) subtitles problem.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

kazz

#2
I have the same issue,(not the subtitles issue) network 7 channels missing for me as well, I've done soft and hard reset, they came back for a few minutes after the hard reset but then disappeared again.
I've raised a support ticket.

Keith

Thanks for your advice IanL-S and comments kazz. Good to know I'm not alone with this problem!

A soft reset made no difference. I then did a hard reset and lost all channels (New services found: 0). My IceTV login details were correctly entered and I was connected to my network. I then repeated the hard reset with the same result.

On both occasions a brief message popped up about an IceTV error and to check the event log. The event log message was that the Tvheadend HTSP Client was unreachable. There are no channels showing under "All Channels". I have attached a couple of pics.

It's getting very frustrating trying to get my IceBox to work as each change seems to make it worse. However I now know my WiFi passwork and IceTV details by heart....

Any further suggestions?

MD

I'm really sorry for this serious IceBox problem. We are working as hard as we can to get to the bottom of it but I'm guessing it may be buried in a labyrinth of guide metadata so it's a laborious step-by-step process.

Please be assured we are working on it full time and will remain so until it is solved.  Many thanks also for your patience as it is not a good start to what we believe will be a very nice IceTV PVR.

Keith

Thanks MD, I appreciate the reply and look forward to a fix.

I expected some issues with a newly developed unit. The IceBox is a neat package and my old Beyonwiz is still creaking along.

My son built a linux Mythbox with an amazing 2 TV tuners in about 2006-07 and I've been using IceTV ever since. He had plenty of problems to solve to get it to work properly.




IanL-S

This one is a real pain. As I think I mentioned earlier I had the same issue with my IceBox and my now-departed build-your-own IceBox. Only solved the problem by using the last beta before the release build (an option that is not available to other users).

IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

kazz

Thanks MD, had a reply from Daniel on my ticket also saying you guys are looking into a fix.

Daniel Hall at IceTV

A fix for missing channels has just been pushed.

If you have the issue please run a soft reset and the updated software will be installed as part of the setup wizard, which will also rescan and fix any channel mapping, just ensure it is a soft reset so you don't lose any existing recordings.
Regards,

Daniel.
CTO.

kazz

I can confirm that this has fixed the issue for me. 

Keith

Unfortunately the soft reset has not fixed my issue.
My TV tab is blank and when OK is entered an endless "PVR manager is starting up" loop appears.
IceBox has also disappeared from my Add-ons.
Pics attached...

IanL-S

Keith, this is not good news. Not much else I can say.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

Keith

IanL-S, my IceBox's issues seem to be much more severe than missing channels. I hope it can be sorted :(

Ian_AW


Keith

I wrote down the IP address when doing the firmware update.
I've just looked again under System Information and the IP address is blank, no address is displayed