IceTV Forum

IceTV IceBox => Getting Help => Topic started by: Keith on February 16, 2023, 03:29:22 PM

Title: Channel Problem after Firmware Update + Subtitles?
Post by: Keith on February 16, 2023, 03:29:22 PM
Earlier this week I did the firmware update successfully for my IceBox as per instructions including the soft reset, forced update due to guide gaps and unplugging the unit from power (several times) but am missing most of my TV channels.
The IceTV Guide Settings on my computer shows 31 channels but only 14 are visible under "All Channels" on the IceBox. There are no Channel 7 channels at all. All channels were present prior to the update. As a result, only some of my programmes are now being recorded on the IceBox. I only use IceTV to set recordings.
How do I fix this?
I've gone back to using my old and dodgy Beyonwiz T2, which records all IceTV progammes and has subtitles, which I could never get to work on my IceBox recordings, a big negative for me. I know there are others who have posted about subtitles but I have not seen a fix.
I have turned on "prefer subtitles" in Expert Player Settings and also checked manually through the Menu button when playing recordings that Subtitles is on.
Thanks in advance for any assistance.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: IanL-S on February 16, 2023, 03:50:46 PM
At the top of the EPG there is a series of TABs, one of which is All Channels, I assume there is not also one for 7 network.

From time to time I have had an incomplete service scan. If you are using the latest firmware you can do a soft reset.

Move to the Kodi navigation payne (left column), and down to Add-ons, then select IceBox Configuration. The "cursor" should be on System, move to the right, then move down to Reset System, then select Reset to System Defaults (soft reset), and select it. Your recordings will be retained and EPG and timers downloaded again during the process. The process should involve a scan of for available services, which should pickup the missing services. If it does not (and with earlier builds I have had that happen) you will need to do a hard-reset instead. Again recordings will be retaied and EPG data and timers will be downloaded duing the setup routine (including a full service scan).

EDIT: I do not have a solution to the (very annoying) subtitles problem.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: kazz on February 16, 2023, 06:19:31 PM
I have the same issue,(not the subtitles issue) network 7 channels missing for me as well, I've done soft and hard reset, they came back for a few minutes after the hard reset but then disappeared again.
I've raised a support ticket.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Keith on February 17, 2023, 12:37:50 PM
Thanks for your advice IanL-S and comments kazz. Good to know I'm not alone with this problem!

A soft reset made no difference. I then did a hard reset and lost all channels (New services found: 0). My IceTV login details were correctly entered and I was connected to my network. I then repeated the hard reset with the same result.

On both occasions a brief message popped up about an IceTV error and to check the event log. The event log message was that the Tvheadend HTSP Client was unreachable. There are no channels showing under "All Channels". I have attached a couple of pics.

It's getting very frustrating trying to get my IceBox to work as each change seems to make it worse. However I now know my WiFi passwork and IceTV details by heart....

Any further suggestions?
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: MD on February 17, 2023, 03:50:15 PM
I'm really sorry for this serious IceBox problem. We are working as hard as we can to get to the bottom of it but I'm guessing it may be buried in a labyrinth of guide metadata so it's a laborious step-by-step process.

Please be assured we are working on it full time and will remain so until it is solved.  Many thanks also for your patience as it is not a good start to what we believe will be a very nice IceTV PVR.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Keith on February 17, 2023, 04:14:18 PM
Thanks MD, I appreciate the reply and look forward to a fix.

I expected some issues with a newly developed unit. The IceBox is a neat package and my old Beyonwiz is still creaking along.

My son built a linux Mythbox with an amazing 2 TV tuners in about 2006-07 and I've been using IceTV ever since. He had plenty of problems to solve to get it to work properly.



Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: IanL-S on February 17, 2023, 04:41:53 PM
This one is a real pain. As I think I mentioned earlier I had the same issue with my IceBox and my now-departed build-your-own IceBox. Only solved the problem by using the last beta before the release build (an option that is not available to other users).

Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: kazz on February 17, 2023, 06:11:00 PM
Thanks MD, had a reply from Daniel on my ticket also saying you guys are looking into a fix.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Daniel Hall at IceTV on February 17, 2023, 09:00:25 PM
A fix for missing channels has just been pushed.

If you have the issue please run a soft reset and the updated software will be installed as part of the setup wizard, which will also rescan and fix any channel mapping, just ensure it is a soft reset so you don't lose any existing recordings.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: kazz on February 17, 2023, 10:03:06 PM
I can confirm that this has fixed the issue for me. 
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Keith on February 18, 2023, 11:01:57 AM
Unfortunately the soft reset has not fixed my issue.
My TV tab is blank and when OK is entered an endless "PVR manager is starting up" loop appears.
IceBox has also disappeared from my Add-ons.
Pics attached...
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: IanL-S on February 18, 2023, 12:51:31 PM
Keith, this is not good news. Not much else I can say.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Keith on February 18, 2023, 02:50:33 PM
IanL-S, my IceBox's issues seem to be much more severe than missing channels. I hope it can be sorted :(
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Ian_AW on February 18, 2023, 05:31:52 PM
Do you know the IP Address if your IceBox?
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Keith on February 18, 2023, 05:59:12 PM
I wrote down the IP address when doing the firmware update.
I've just looked again under System Information and the IP address is blank, no address is displayed
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Ian_AW on February 18, 2023, 07:24:42 PM
Quote from: Keith on February 18, 2023, 05:59:12 PMI wrote down the IP address when doing the firmware update.
I've just looked again under System Information and the IP address is blank, no address is displayed

My reason for asking was to try and flush out where it was getting to. So, at least you know where in the boot cycle the system is getting to rather than try and look everywhere.

Hopefully the fix will be there soon for you.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: vader1111 on February 19, 2023, 12:14:00 AM
Quote from: Keith on February 18, 2023, 11:01:57 AMUnfortunately the soft reset has not fixed my issue.
My TV tab is blank and when OK is entered an endless "PVR manager is starting up" loop appears.
IceBox has also disappeared from my Add-ons.
Pics attached...
Keith, this sounds like the very first version of the firmware, which the beta testers received last November.  We haven't seen anything like what you're describing for a long time.

Can you confirm which version of the firmware you are running?
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Keith on February 19, 2023, 09:34:44 AM
The firmware version appears to be current. Pic attached
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: IanL-S on February 19, 2023, 11:17:55 AM
Keith, I just remebered why this may be happening. I had this problem early on during beta testing. My solution was to my IceTV account, then select My Recorders, then I clicked on the Add Recorder tab and created a dummy device in my IceTV account settings; in my case a TRF-2460 which I gave the name "Dummy". I then selected the the Copy Timers to a new device tab, and copied the timers from the IceBox to Dummy. This only copies timers for series recordings; one of timers will not be copied.

The next step was to go back to My Devices tab, and delete the IceBox device.

When the IceBox next contact the server, a new device is created, called Ice Box, and hopefully the installation wizard will go to completion. You must power off the IceBox before making the account chnages. The start the IceBox and the Installation Wizard may run of its own volition, if not you will need to do a soft reset to initiate the wizard.

Hope this solves your problem.

Ian
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Keith on February 19, 2023, 12:51:48 PM
My IceTV account is currently set up to record identically onto 2 devices - my old Beyonwiz T2 and the IceBox.
 
Could I just power off the Icebox and delete it from IceTV rather than creating a dummy device? I assume the Beyonwiz recording instructions would then copy to the IceBox if installation succeeds.

Thanks to all for your advice :)
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: IanL-S on February 19, 2023, 05:50:22 PM
You would have to manually copy the timers to the IceBox using the method I described above.

Ian
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Daniel Hall at IceTV on February 19, 2023, 06:17:01 PM
Hi Keith,

This sounds like the the network was not setup correctly during the initial setup wizard, there are updates that are required just after the initial setup wizard is complete and this has not happened.

To fix this now the best option is to perform another 'soft reset' and then during the initial setup wizard ensure that the network gets connected and shows as "State: online" and that the "Address" shows an IP Address.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Keith on February 19, 2023, 10:03:59 PM
Thanks Daniel and IanL-S,

I first did the soft reset as suggested by Daniel and obtained an online state and IP address. IceBox also reappeared in my add ons and I was able to go through the IceTV setup and channel scan. As before the channel scan resulted in zero channels.

I then powered off the IceBox and deleted it from my IceTV recorders list as suggested by IanL-S. Restarting the IceBox initiated a new channel scan which again resulted in no channels found. The IceBox did not show up in my IceTV devices and could not be manually added as it is automatic through the device.

Next was another soft reset, online state and IP address obtained, IceTV account details correctly entered, channels scanned and again no channels located. The log continues to show the same error message as on previous occasions: Tvheadend HTSP Client server is unreachable. At least the IceBox does now show up in my IceTV devices.

I have checked the physical connections for the tuners, which have not been touched since installation, and they appear to be properly connected.

Is there anything else I can try to get this unit working?
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Daniel Hall at IceTV on February 19, 2023, 10:18:31 PM
Quote from: Keith on February 19, 2023, 10:03:59 PMI first did the soft reset as suggested by Daniel and obtained an online state and IP address. IceBox also reappeared in my add ons and I was able to go through the IceTV setup and channel scan. As before the channel scan resulted in zero channels.

This is the most concerning part to be honest, are you able to take a photo of your tuners and the splitter to show how it all looks so we can see it?
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Ian_AW on February 19, 2023, 10:33:19 PM
I apologise for asking this, but here goes. Is everything plugged in properly?
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: IanL-S on February 20, 2023, 08:30:59 AM
Quote from: Ian_AW on February 19, 2023, 10:33:19 PMI apologise for asking this, but here goes. Is everything plugged in properly?

It appears that everything was checked from the information provided; need to make sure that the coax cable is fimrly attached to the tuners and a splitter if there are 2 USB tuners. Also check the F-type male to PAL male connectors are firmly screwed onto the spliter; that the coax from the wall plate to the splitter is firmly seated.

All my wall-plates have f-type connections; one time I had a cable come loose and did not notice it had happened. You do not expect f-type connections to unscrew.

Ian
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Keith on February 20, 2023, 10:36:43 AM
Thanks Ian_AW and IanL-S. No apologies required as you have solved my problems :)

I had checked the IceBox connectors and cables including the splitter, but not the wall plate PAL outlet. With diabolical timing the coax cable was loose at the wall. It's near a power point and probably got knocked. I'll have to look at changing to F-type connectors on my wall plates.

With everything properly connected, IceBox found all my channels and I could copy the timers from my Beyonwiz.

With much embarassment, thanks to everyone for your advice.





Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: MD on February 20, 2023, 11:02:25 AM
That's excellent news and thanks for the update (and admission🤣👍).
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: IanL-S on February 20, 2023, 11:04:59 AM
Wow, glad it is sorted after all this time.

You are not the first and will not be the last be caught by loose connection at the wall plate.

Now all I need to do is to work out why my "new" build-your-own unit is having similar problems.

Ian
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: MD on February 20, 2023, 11:09:52 AM
Just one more thing... Ian mentioned a loose F-Type connector which possible "unscrewed" due to a slight twist in its cable (guessing here?!).  Yet they need to be just "pinch tight" as the steel "nut" is tightening on to a cast alloy thread and they can get over tightened very easily when the thread strips or the nut becomes misaligned. Personally I find finger tight is satisfactory as there's no reason for them to ever shake loose, but ensure cables are not twisted to turn them undone again.  If a spanner or pliers are used be very gentle.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: IanL-S on February 20, 2023, 02:35:42 PM
Quote from: MD on February 20, 2023, 11:09:52 AMJust one more thing... Ian mentioned a loose F-Type connector which possible "unscrewed" due to a slight twist in its cable (guessing here?!).  Yet they need to be just "pinch tight" as the steel "nut" is tightening on to a cast alloy thread and they can get over tightened very easily when the thread strips or the nut becomes misaligned. Personally I find finger tight is satisfactory as there's no reason for them to ever shake loose, but ensure cables are not twisted to turn them undone again.  If a spanner or pliers are used be very gentle.

MD, I agree with the adice you give on this.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: Ian_AW on February 20, 2023, 09:16:13 PM
Quote from: IanL-S on February 20, 2023, 11:04:59 AMNow all I need to do is to work out why my "new" build-your-own unit is having similar problems.


The thing is there are effectively 2 "networks" involved. There is the broadcast network that you connect to via the antenna, and then the network by which you connect to the IceTV server.

The IceTV server sets timers and initiates recordings but it is the broadcast network that you tap into and either display live TV or save programs for later viewing.

When things don't work as expected it is trying to track down where something is that is the problem.

Hope it all works out.
Title: Re: Channel Problem after Firmware Update + Subtitles?
Post by: MD on February 20, 2023, 10:42:42 PM
Just like TiVo and Plex:)