Missing ABC Content in EPG

Started by Brainz, October 25, 2024, 10:00:39 AM

Previous topic - Next topic

prl

Hi, Daniel. I just tried looked at the IceTV EPG on my test V2, and it's the same as our in-use T4: no ABC EPG except for ABC News. I also checked my server-side channel settings on my IceTV account page, and there doesn't seem to be anything haywire there.

There were no errors in the IceTV log apart from the two \show duration errors that I mentioned earlier.

I'll check again in the morning and if the problem's still there, I'll enable IceTV debugging to get a snapshot of the JSON data and see if I can find anything there.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

Daniel Hall at IceTV

Quote from: prl on October 25, 2024, 10:29:16 PMHi, Daniel. I just tried looked at the IceTV EPG on my test V2, and it's the same as our in-use T4: no ABC EPG except for ABC News. I also checked my server-side channel settings on my IceTV account page, and there doesn't seem to be anything haywire there.

There were no errors in the IceTV log apart from the two \show duration errors that I mentioned earlier.

I'll check again in the morning and if the problem's still there, I'll enable IceTV debugging to get a snapshot of the JSON data and see if I can find anything there.

If you could have a look that would be great, as looking at the json feed in use, the guide data is in it and correct.
Regards,

Daniel.
CTO.

prl

Hi, Daniel.

I did a wget fetch of the IceTV data for Canberra, and it seems that there is data for all of the ABC channels, but when I look at the EPG on my test V2, it's evident that the data for the ABC channels is incomplete.

I'll send you a copy of the wget fetchs by email, if you like. I'll look at writing a python script to search for gaps if you think that that will help.

The two shows that have bad durations (and are probably due to an unrelated issue) are:
            "channel_id": "2821",
            "id": "187253428",
            "title": "The Kelly Clarkson Show",
            "start": "2024-10-25T21:30:00+00:00",
            "start_unix": "1729891800",
            "stop": "2035-10-28T19:32:00+00:00", <<<<<<<<<
            "stop_unix": "2077212720", <<<<<<<<<

            "channel_id": "2736",
            "id": "187273799",
            "title": "House Hunters International",
            "start": "2024-10-26T16:30:00+00:00",
            "start_unix": "1729960200",
            "stop": "2035-10-28T19:32:00+00:00", <<<<<<<<<
            "stop_unix": "2077212720", <<<<<<<<<

It's interesting that the two incorrect stop times are exactly the same.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

prl

Hi, Daniel, I've emailed you a copy of the wget fetch of the Canberra IceTV data. You should be able to find the two shows with the bad stop times in the fetch data by using the show ids in my previous post. Both shows have stop times 11 years in the future.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

MD

Hi everyone and thank you for your help.  Daniel is driving at the moment but will look at the wget etc when he arrives and get back onto a solution hopefully later today

prl

Quote from: prl on October 26, 2024, 10:50:44 AMI'll look at writing a python script to search for gaps if you think that that will help.

I've done that now, and while the script finds the bad stop times for the two shows with bad stop times, and it finds a gap if I delete a show from the data, it doesn't find any gaps in the JSON IceTV EPG data for Canberra.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

IanL-S

@Daniel Hall, I have not noticed anything astray on my T2s, U4 or V2 - but I have been dealing the the consequences of a power failure last night - had to re-enter the password for each unit (and one T2 was being decidedly bloody-minded). I will check and report back.

Other than getting a UPS, is there any way of preserving the password when there is a power failure?

Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

IanL-S

I am missing ABC network EPG data on the V2 and U4 up until at least midnight today. Assume the same for the T2. Fortunately the IceBox is not affected.

Toppys have completely blank EPG probably leftover from power outage.
 
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

prl

Quote from: IanL-S on October 26, 2024, 12:23:27 PMOther than getting a UPS, is there any way of preserving the password when there is a power failure?

The password isn't stored on the Beyonwiz, only the EPG server access token. It should be saved in the settings file (/etc/enigma2/settings) each time it is fetched from IceTV.

If you didn't restore settings, or you restored a very old settings file or one from when IceTV hadn't been set up, you may have had a stale token, or no token in the settings file.

The stored token looks like this:
config.plugins.icetv.member.token=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
Where the Xs are (lower-case) hexadecimal digits.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

prl

Quote from: prl on October 26, 2024, 12:11:50 PMI've done that now, and while the script finds the bad stop times for the two shows with bad stop times, and it finds a gap if I delete a show from the data, it doesn't find any gaps in the JSON IceTV EPG data for Canberra.

I've now also grabbed a copy of the raw IceTV JSON from my test V2 and checked it for gaps in the ABC data and found none. Both the script and the IceTV log still show the stop time/duration error on the Kelly Clarkson episode, but not the House Hunters International episode that previously had the bad stop time/duration.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

Daniel Hall at IceTV

Quote from: prl on October 26, 2024, 12:56:33 PM
Quote from: prl on October 26, 2024, 12:11:50 PMI've done that now, and while the script finds the bad stop times for the two shows with bad stop times, and it finds a gap if I delete a show from the data, it doesn't find any gaps in the JSON IceTV EPG data for Canberra.

I've now also grabbed a copy of the raw IceTV JSON from my test V2 and checked it for gaps in the ABC data and found none. Both the script and the IceTV log still show the stop time/duration error on the Kelly Clarkson episode, but not the House Hunters International episode that previously had the bad stop time/duration.

The thing is though, these are not shows on ABC, and the same feed is in use by the IceBoxes, and Humax 2Tune boxes as well, but it's only happening for ABC network channels and for Beyonwiz T/U/V series boxes.

I am not at home to be able to test with a V2 at the moment but can later on tonight.
Regards,

Daniel.
CTO.

prl

#26
Yes, I've always said that the wildly incorrect stop time errors are unrelated to the missing ABC EPG data.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

prl

Currently the EPG for ABC TV is empty up to the episode of Rage Guest Programmer (2331-0501 tonight/tomorrow morning), then there are a sequence of missing entries after that early tomorrow morning (Sun 27 Oct), Rage (0501-0600), Rage (0600-0700), Weekend Breakfast (0700-0902). The rest of the day's programming is missing up to Plum (2030-2126), then the EPG is empty from 27/10 2126 - 28/10 0001 when Fires is shown (28/10 0001-0052). From there on, the EPG for ABC TV is OK for the rest of the week.

Looking at the programs I listed that follow Rage Guest Programmer, I can't see anything wrong with the JSON data.

The only IceTV errors in either the onscreen log or the debug log file are for the unrelated stop time problem with the Kelly Carson Show.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

Daniel Hall at IceTV

I have finally got a fix running now, it is updating all the available data, it will finish in the next 15-20 minutes or so, after that your Beyonwiz should download the updated data automatically.
Regards,

Daniel.
CTO.

BazzaG

Daniel, thanks for your work, however, looking at the IceTV log:

2024-10-27 17:24:58 - EPG downloaded OK

However, there's no change to the ABC channels (Melbourne).

I can't reboot my U4 at the moment as it's busy recording another channel.

Or should I try something else?