Recurring timers stalled on January 26, 2023

Started by Ian_AW, January 24, 2023, 07:42:40 AM

Previous topic - Next topic

Ian_AW

My IceBox is not setting recurring timers past January 26, 2023.

I went hunting through the settings and found an entry on the PVR-TV screen which stopped the IceBox from receiving timer updates during playback.

I was also missing recordings being set well over a couple of hours before the event because I was watching a series of recordings in sequence.

I switched that setting OFF to allow updates at all times to see if that released the timers but no luck.

Overnight, there have been no recurring timers reset with it still showing no new timers after January 26, 2023.

Is it possible that the timer involved is blocking new timer events being set, or should I delete the timer in question and see if the IceTV server resets in and those queued up behind?

Thanks.

vader1111

Can you please go to My Account -> Guide Settings, in the IceTV website, and confirm whether or not your IceBox is still doing EPG fetches?

Beta testing identified a number of conditions which caused the IceBox to stop fetching the EPG data from the IceTV servers.  However, these have all been fixed, as far as I am aware, prior to public release.  It's possible you've found another one.

Ian_AW

Quote from: vader1111 on January 24, 2023, 10:05:44 AMCan you please go to My Account -> Guide Settings, in the IceTV website, and confirm whether or not your IceBox is still doing EPG fetches?

Beta testing identified a number of conditions which caused the IceBox to stop fetching the EPG data from the IceTV servers.  However, these have all been fixed, as far as I am aware, prior to public release.  It's possible you've found another one.

This is the information from My Account > Guide Settings

So, EPG fetches are OK, just the timers are not getting added.

Last EPG fetches:

24 January, 2023 at 09:46am with IceTV Remote - iPhone
24 January, 2023 at 10:13am with IceTV IceBox
24 January, 2023 at 10:13am with Windows 7 MCE

Thanks.

IanL-S

I have seen this with pre-release beta, but with the exception of Who Do You Think You Are? all timers are downloading.

If you have scheduled Who Do You Think You Are, check to make sure the timer is set, as it has been reported that timers for that program are not being set. I have 5 epsidoes that have not been set to record (4 for Australia and one for USA).
Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

Ian_AW

Quote from: IanL-S on January 24, 2023, 10:56:35 AMI have seen this with pre-release beta, but with the exception of Who Do You Think You Are? all timers are downloading.

If you have scheduled Who Do You Think You Are, check to make sure the timer is set, as it has been reported that timers for that program are not being set. I have 5 epsidoes that have not been set to record (4 for Australia and one for USA).
Ian

The program timer it stalls on in War of the Worlds, however deleting it has not seen it reappear. It is the last in the list (most into the future).

Ian_AW

Something is causing it to stall.

At around 10:13 this morning, I did a power down and then power up. This is what I showed in my earlier post.

After 1 hour 15 min on the phone with a problem with my phone service (unrelated - Optus kept telling callers my number had been disconnected), I checked, and nothing had advanced.

I decided to resend all the timers from My Account > My Recorders, but nothing changes. The IceBox does not show any of the stalled timers, and there is nothing new in My Account either.

After lunch, I am going to try and figure out which event is the issue. I might even risk clearing out the timers and get them from IceTV again.

vader1111

Quote from: raj1954 on January 24, 2023, 12:38:09 PMSomething is causing it to stall.

At around 10:13 this morning, I did a power down and then power up. This is what I showed in my earlier post.

After 1 hour 15 min on the phone with a problem with my phone service (unrelated - Optus kept telling callers my number had been disconnected), I checked, and nothing had advanced.

I decided to resend all the timers from My Account > My Recorders, but nothing changes. The IceBox does not show any of the stalled timers, and there is nothing new in My Account either.

After lunch, I am going to try and figure out which event is the issue. I might even risk clearing out the timers and get them from IceTV again.
Can you confirm that it is still doing EPG fetches?  When the IceBox reboots, it attempts to call home, and this shows up as an EPG fetch.  Unfortunately, if there is a problem downloading the timers or EPG information, it then stops calling home.

You said that you rebooted at 10:13am, and it's possible that the IceBox fetch shown is this initial EPG fetch attempt.  Can you confirm that it is still fetching the EPG, beyond that initial attempt?

Ian_AW

Quote from: vader1111 on January 24, 2023, 01:18:31 PMCan you confirm that it is still doing EPG fetches?  When the IceBox reboots, it attempts to call home, and this shows up as an EPG fetch.  Unfortunately, if there is a problem downloading the timers or EPG information, it then stops calling home.

You said that you rebooted at 10:13am, and it's possible that the IceBox fetch shown is this initial EPG fetch attempt.  Can you confirm that it is still fetching the EPG, beyond that initial attempt?

This is the current EPG fetches, and the only one that seems to be re-checking is the Windows 7 MCE which I would guess and say it is the account page of the site. The IceBox is doing nothing, and even the 10:13 am fetch did not link anything past January 26, 2023.

24 January, 2023 at 10:39am with IceTV Remote - iPhone
24 January, 2023 at 01:52pm with Windows 7 MCE
24 January, 2023 at 10:13am with IceTV IceBox

I am going to cycle the router.

Cycled it, but no change.

Last EPG fetches:

24 January, 2023 at 10:39am with IceTV Remote - iPhone
24 January, 2023 at 02:08pm with Windows 7 MCE
24 January, 2023 at 10:13am with IceTV IceBox

Sounds like we are looking at the wrong end of the list. Maybe something has become corrupted and causing the transfer to time out.

Starting to look like the solution is to delete the timers and get IceTV to add them.

Is there a log file somewhere?

vader1111

#8
Quote from: raj1954 on January 24, 2023, 02:28:57 PM
Quote from: vader1111 on January 24, 2023, 01:18:31 PMCan you confirm that it is still doing EPG fetches?  When the IceBox reboots, it attempts to call home, and this shows up as an EPG fetch.  Unfortunately, if there is a problem downloading the timers or EPG information, it then stops calling home.

You said that you rebooted at 10:13am, and it's possible that the IceBox fetch shown is this initial EPG fetch attempt.  Can you confirm that it is still fetching the EPG, beyond that initial attempt?
This is the current EPG fetches, and the only one that seems to be re-checking is the Windows 7 MCE which I would guess and say it is the account page of the site. The IceBox is doing nothing, and even the 10:13 am fetch did not link anything past January 26, 2023.

24 January, 2023 at 10:39am with IceTV Remote - iPhone
24 January, 2023 at 01:52pm with Windows 7 MCE
24 January, 2023 at 10:13am with IceTV IceBox

I am going to cycle the router.

Cycled it, but no change.

Last EPG fetches:

24 January, 2023 at 10:39am with IceTV Remote - iPhone
24 January, 2023 at 02:08pm with Windows 7 MCE
24 January, 2023 at 10:13am with IceTV IceBox

Sounds like we are looking at the wrong end of the list. Maybe something has become corrupted and causing the transfer to time out.

Starting to look like the solution is to delete the timers and get IceTV to add them.

Is there a log file somewhere?

Your IceBox hasn't done an EPG fetch since you rebooted it at 10:13AM.  This is what I was expecting to see, given our previous experiences when beta testing. We thought we'd gotten rid of all of these problems, but apparently you've discovered another one!

Rebooting the router won't fix the problem.

Log files can be generated by going to //icebox/Logfiles in File Manager (on a Windows computer, on the same network as the IceBox).  Posting it here would be very helpful (it should be a few hundred KB in size).

What you could do, which would be helpful, is this...
1. Delete all of the timers, in IceTV, which are supposed to be going to your IceBox. 
2. Reboot the IceBox.
3. Re-add the timers (in IceTV) one, by one, waiting until you have a solid red disc (indicating that the timer has gone through) before proceeding to the next timer.

This would help us to isolate the offending timer, and we can start to figure out why it is causing problems.

vader1111

Raj - can I ask you where you are located?  When we were doing the beta testing, people in Canberra had problems with the IceTV -> Antenna channel mappings, which were significantly different from those in the main capital cities. 

If you're in a regional area, then it may be that Dan has some more work to do on the channel mappings for your region.

MD

Hi Ian,

You IceBox is not connecting to our servers. You can always heck by going to your IceTV website Guide Settings where the last login times of each device is show.  At present the IceBox should connect every minute, a fast repeat connection we have set to make testing easier.

I'd suggest a hard reset from within the LibreELEC icon In System Settings?

IanL-S

Before going to extremes, I would try deleting your IceBox from your account. The procedure I have used in the past:

  • Create a dummy device in your account (I use Topfield 2400 for device type).
  • Chnage the name of the device in your account to Dummy
  • Copy the timers from your IceBox to the Dummy device
  • Power down the IceBox
  • Delete the IceBox from your account
  • Start up the IceBox, hopefully it will recreate the device in your account.
  • Once you are safisfied that the IceBox is contaction the IceTV server every minute, copy all the times from Dummy to IceBox.
  • Hopefully the timers will then be downloaded; because the IceBox is logging in every minute there could be interruptions to the process but eventually all timers should download.

No guarantee that it will solve the problem, but is has worked a few times for me.

Resetting the IceBox should be the last thing you try, as doing so apparently deletes all your recordings.

To help in dealing with the issue, please download the log files using the process described by vader1111 and post them here.

Hope this helps

Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

Ian_AW

Ok, I deleted all the timers and then rebooted the IceBox.

There was no timer information. In other words, it was like I had just started IceTV from scratch.

I created a timer in the IceTV app. I waited for the next fetch, and nothing. When I create the timer event in the app, the red disc is red.

If I do a send recording events to the device, again, with just one timer, again, nothing.

At the moment it is a case of setting events on almost every day as those that were previously set would have run into the brick wall.

I am going to try and do a transfer of information from my expired Beyonwiz T2.

I will try and upload the log files to support.

vader1111

#13
Quote from: raj1954 on January 24, 2023, 04:39:56 PMOk, I deleted all the timers and then rebooted the IceBox.

There was no timer information. In other words, it was like I had just started IceTV from scratch.

I created a timer in the IceTV app. I waited for the next fetch, and nothing. When I create the timer event in the app, the red disc is red.

If I do a send recording events to the device, again, with just one timer, again, nothing.

At the moment it is a case of setting events on almost every day as those that were previously set would have run into the brick wall.

I am going to try and do a transfer of information from my expired Beyonwiz T2.

I will try and upload the log files to support.
Can you confirm that your IceBox is doing EPG fetches?  It should be doing them every minute, so hitting refresh a few times on the "Guide Settings" page in IceTV should give you an idea whether or not this is happening.

However, it sounds as if a "Hard Reset" may be in order.  Note that this formats the SSD, deleting any/all recordings in the process - so make sure you've copied them elsewhere before you nuke the box.

My suggestion...
  • Delete all IceBox timers in IceTV
  • Hard Reset
  • Add timers again, one at a time (as per my previous instructions), until the culprit is revealed
  • Upload logfile once the culprit is identified.

To do a Hard Reset, go to Settings, then go down the bottom to LibreELEC settings.  Look for an option to reset IceBox to original settings (or words to that effect).  Sorry, I'm not at home, so I can't tell you what the actual menu item is.

When doing the Hard Reset, don't forget to wait ~2min at the SSH/SMB page (in the LibreELEC wizard), this gives the IceBox time to find/download/install the latest version of the IceTV Addon before you start the IceTV Wizard.

Ian_AW

Well, I had the single event (Jeopardy!) set by picking the record button on the remote. The timer events were empty.

I went to My Account and picked the tab to transfer timers from my old T2 to the IceBox. Now what I was expecting was for the entire lot of timers to come over, however only the remaining events for Jeopardy! for the rest of the EPG period were set right until Jan 30, 2023.

Im hoping that it will be a matter of doing this for the rest of the timer events and then create any additional ones.