Channel Problem after Firmware Update + Subtitles?

Started by Keith, February 16, 2023, 03:29:22 PM

Previous topic - Next topic

IanL-S

Quote from: MD on February 20, 2023, 11:09:52 AMJust one more thing... Ian mentioned a loose F-Type connector which possible "unscrewed" due to a slight twist in its cable (guessing here?!).  Yet they need to be just "pinch tight" as the steel "nut" is tightening on to a cast alloy thread and they can get over tightened very easily when the thread strips or the nut becomes misaligned. Personally I find finger tight is satisfactory as there's no reason for them to ever shake loose, but ensure cables are not twisted to turn them undone again.  If a spanner or pliers are used be very gentle.

MD, I agree with the adice you give on this.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

Ian_AW

Quote from: IanL-S on February 20, 2023, 11:04:59 AMNow all I need to do is to work out why my "new" build-your-own unit is having similar problems.


The thing is there are effectively 2 "networks" involved. There is the broadcast network that you connect to via the antenna, and then the network by which you connect to the IceTV server.

The IceTV server sets timers and initiates recordings but it is the broadcast network that you tap into and either display live TV or save programs for later viewing.

When things don't work as expected it is trying to track down where something is that is the problem.

Hope it all works out.

MD