IceTV Forum

IceTV Guide for IceTV enabled PVRs => Windows Media Center => Topic started by: davidwadley on March 02, 2009, 09:49:57 PM

Title: The matching channel was found, but there was no program in the MCE guide...
Post by: davidwadley on March 02, 2009, 09:49:57 PM
Hi,

I am getting the following error over and over again.

Error 500 updating tasks to server.
Error in uploadData(), HTTP response: 500 (Internal Server Error)
Couldn't match IceTV program entry to MCE entry (program)

The matching channel was found, but there was no program in the MCE guide at that time.
- - - - - - SchedulerTimerTaskData
- - - - - - - Pimp Channel ID: 12
- - - - - - - Pimp Channel Name: Seven
- - - - - - - Pimp Network Name:
- - - - - - - Start: 26/02/2009 10:30:00 AM (26/02/2009 8:30:00 PM local)
- - - - - - - Duration: 01:00:00
- - - - - - - Recurrence: 0
- - - - - - - Last Error:
- - - - - - - MCE Channel Number: 4
- - - - - - - MCE Channel Name: Seven
- - - - - - - MCE Channel CallSign: Seven
- - - - - - - SE: <SEID SrvID="11" SourceId="0" PrID="0" Start="0001-01-01T00:00:00" Duration="P733466DT14H30M" ChID="4" />

I have seen a few articles on clearing out the files in C:\Users\[username]\AppData\Local\icetv but I can't seem to find this folder even after unhiding the protected files etc.

Any ideas ?

I am also getting this error as well

Request ignored because it's being made too often.
-Message
- DeviceID: 0
- MessageTypeID: MT_SEND_FILER_STATE
- IsRequest: False
- IsError: True
- NewFormat: True
- ProtoVersion: 2
- AppVersion: 107
- AppName: ICELINK PIMP SERVER
- MessageWait: 30
- MessageCookie:
- StatusMessage: Request ignored because it's being made too often.
- - - - SendFilerStateReply
- - - - - _job_count: 0


Any help would be appreciated.

David

Title: Re: The matching channel was found, but there was no program in the MCE guide...
Post by: OzRob on March 03, 2009, 09:16:26 AM
+1 for me. Identical problem.
Title: Re: The matching channel was found, but there was no program in the MCE guide...
Post by: Daniel Drysdale at IceTV on March 03, 2009, 02:03:42 PM
We have been working on an issue that was reported by Beyonwiz users regarding failure of SchedulerState messages to be processed by the server. We believe the issue has been rectified now, from the log messages you posted I think this issue was causing your problems.

Let us know if the issue persists.

Cheers
Daniel Drysdale
Software Manager @ IceTV
Title: Re: The matching channel was found, but there was no program in the MCE guide...
Post by: OzRob on March 06, 2009, 03:04:50 PM
Your fix has worked for me. The errors have disappeard. All working normally again.
Title: Re: The matching channel was found, but there was no program in the MCE guide...
Post by: melmac on March 11, 2009, 12:22:46 PM
I have been getting this problem as well (Vista Media Centre)
Was the fix something at the ice end or is there something that I need to do ?

Mel
Title: Re: The matching channel was found, but there was no program in the MCE guide...
Post by: numloxx on May 27, 2009, 01:26:46 AM
I'm also getting this on Vista.
No programs been recorded since 13 May.
Mainly ten news, Simpsons etc...
About to re-install Icetv and reset media centre and do a re-scan.
Title: Re: The matching channel was found, but there was no program in the MCE guide...
Post by: byronl on September 19, 2009, 08:53:06 AM
I get this all the time as well. Not sure if we are missing recordings or not.