Hi,
I'm a couple of days into a trial run of Iceguide for MCE, and I've had this problem twice now (once last night, once tonight).
When I try to schedule a recording - it's only happened at around this time of night so far - I get Error 23, or a message like:
Recording Cannot Be Scheduled
The recording cannot be scheduled because Media Center is unable to access information in the Guide. Please restart the computer and try again. If the problem persists, try manually downloading the guide.
If I try to manually trigger a guide download at that point, it tries and fails.
Last time this happened, I didn't actually have to restart anything before it started working again - I just tried it later, and it was fine. But it's something new with IceGuide - the last couple of guide programs didn't have the same problem.
Exiting and reopening Eshell doesn't change the situation.
If I had to guess, I'd think it happened if another show is already being recorded. It worked fine until this evening's shows started being recorded, but that's circumstantial.
Any ideas how to diagnose and fix it?
And it again fixed itself later.
If I had to guess, I'd think it was while another show was recording, it's hard to tag something to record. I'll play more later.
Any further information would be much appreciated. We're running some tests as well.
Peter
We have had a close look at this now, and run many tests. So far we have not seen any problem.
Furthermore we have not had any other reports of similar issues.
If any other users reading this have experienced the same trouble, please let us know!
Meanwhile, I wonder if you have any other software loaded that might be upsetting the operation of MCE? Have you installed any "hacks" such as guide importers?
I don;t suppose you have another MCE system availabel to do a fresh install on?
Please let us know if you get any further clues that might help track this down, but it could well be an MCE issue unrelated to the guide data.
Peter
I have used EPGRunner and BladeRunnerPro previously on the same system, with reasonably good results. They're now removed. I haven't used any other hacky things.
If it fails again I'll see if I can get some diagnostics (or just dump the eshell process) at the time.
I'll look around for ways of re-setting (or re-initializing) the MCE guide database, see what happens.
Thanks!
I had it happen a few times when I first moved to the new ice integrated MCE guide (from quickguide). The issue occurred for me pretty regularly when I hit the record button whilst highlighting something in the guide (rather than selecting it and choosing "Record").
Since then I have re-installed the OS as I had some other system instabilities. The issue hasn't re-occurred since then.
However, I do have an error 23 pop up sometimes when MCE tries to download the guide and fails. Exiting MCE and restarting normally fixes it but it is only a hack-fix... I'd rather it didn't happen.
Regards,
Shane.
I too am getting this problem.
Its starting to happen probably at least once a week.
I am NOT running Ru2, I dont have any real intentions on upgrading to RU2 yet.
Has any1 else experienced this?
Has anyone found a fix?
Hello ICE,
Is there a fix for this problem Yet?
Its a very frustrating error to receive as only a reboot fixes the issue.
Ive seen this problem occur on many people's MCE systems.
Please help us locate a fix
Thankyou
I have now also seen this problem occur with a machine running RU2
If anyone else is receiving this error, please also reply to this topic and let ICE know so they can help us find a fix.
Thanks
mrees
We have had a few reports of this problem and as far as I know it is not peculiar to Iceguide. I am making some more enquiries and will get back to you with any findings.
Peter Vogel, CTO IceTV
Thanks Peter
Just as a side note: When I was running Bladerunner Pro for some time, I never experienced these issues.
The only times I could be sure it happened was after ICE was installed.
Of course thats not to say its strictly an ICE issue. It may be something simple such as a software conflict or a wrong version of .NET installed. I havent had a lot of time to disect a MCE install and play. Its a little hard when the problem is occuring at random points.
Any insight though would be very handy
Thanks for the reply
Any progression on this issue?
Regards,
mrees
From my enquiries, I believe this is a known MCE issue. Might be worth posting a question on XPMediacentre or similar MCE forum.
Ice guide does not involve any extra software running on your machine, the installer simply points a registry setting to our server so I can;t see how Ice could be causing a conflict.
There are a couple of people reporting this problem but it doesn't seem to be very widerspread so it sure would be interesting to know what circumstances bring on this annoying problem. Sorry I can't be of any help. Hopefully Microsoft will fix it in due course.
Peter
hmmm
Does sound very weird that I have never received the error when not using ICE.
I Used Bladerunner for a long time, and only since upgrading to ICE have I started to receive the error.
Ive never seen it before ICE.
There is a Fix!
See my posting here:
http://www.icetv.com.au/forum/index.php?topic=172.0
Regards,
Shane.
Shane...
Dude you ROCK
Id be lying if I thought it should have been ICE's place to look into this more than they did.
I will give that a go over the next few days.
You are obviously running the patch. How have you been finding it?
So far it is flawless... however the true test will be over the next week without the twice a week system restart... if it makes it through that with no issues then I am sold.
Regards,
Shane.
Awesome Shane
I will install on my systems and also post results.
I only seems to reboot from that one issue these days.
So if im up in 2 weeks without a restart, it will be a good signal that all is OK
I just wish MS would fix this issue if they know its a problem :(
Out of curiosity, has anyone experienced a problem where they lost their channel mappings?
I got it for the first time last week after a few months of stability. Was very annoying... lost all lmy scheduled shows :(
A few friends of mine are getting that problem too
Any one else?
Hi - I used to get lost channels all the time, until I patched to the latest updates for Media Center from MS.
I'd check Windows Update, do a "Custom" update and see if there are any additional updates to install. If so, install them, then reboot & go back and check again. When there are no more you should be up to date.
If you already had the updates, I'm sorry to say I don't have an answer for you :(
Regards,
Shane.
Shane
Thanks for your reply
Only recently have I upgraded to RU2.
Didnt want to bother seeing some of apps didnt work nicely with RU2 (such as crunchie).
Out of curiosity, whats the longest your system has been up for without needed a reboot?
Prior to RU2, mine was about 6 weeks, not sure now Ive gone to RU2. Will have to wait and see I guess.
Kind regards,
ME
6 weeks wow...
I reboot mine daily through a scheduled task that runs at 6am... just to try and keep things fresh.
Crunchie can work with ru2 - if you need help let me know, but make sure you use the exact versions suggested and you should be fine.
Impact, good to see you here mate :)
No worries and thanks for the heads up with RU2 and crunchie.
I waited for that fix before going down the Ru2 path.
Havent had time to play yet, but its good to know you need those EXACT versions.
Thanks mate,
mrees
Yep - decided to support the only legal EPG solution.... appears not to be well liked by some mods on other boards, but thats their problem, and its ICETV's gain....
I dug up the thread for you that you need -
http://www.xpmediacentre.com.au/community/tv-recordings-conversion-archiving/6318-fix-workaround-crunchie-ru2-issues.html?highlight=crunchie+ru2
Its a long one - as a few people could not get it working, it worked for me first go - and subsequently through the thread you may learn that it is very important to use ffdshow-20051129.exe and not the latest version!!!!
Enjoy
Thanks Impact
As always, such a great help to people.
Ive been using ICE for sometime now, no probs at all.
The only downfall, is no PAYTV support.
Man I wish Packer and co would just grow up and accept technology.
Thanks again
Great to see you here Impact and thanks for your support. Have you tried PIMP yet?
BTW the PIMP client has a "DVB fix" feture that implements this workaround:
http://blogs.msdn.com/peterrosser/archive/2006/02/15/DvbGuideProblem.aspx
Peter
QuoteShane
Thanks for your reply
Only recently have I upgraded to RU2.
Didnt want to bother seeing some of apps didnt work nicely with RU2 (such as crunchie).
Out of curiosity, whats the longest your system has been up for without needed a reboot?
Prior to RU2, mine was about 6 weeks, not sure now Ive gone to RU2. Will have to wait and see I guess.
Kind regards,
ME
Make sure you check the MS WindowsUpdate site again, there are a couple of patches that come up after upgrading to RU2.
As for uptime, I'm beta testing a few apps, as well as having just changed my tuner card from a DVICO Fusion Dual Digital tuner to a Hauppauge Nova-T 500 MCE (Dual tuner), my reboots in the last week have been 2 or 3.
Other than that though, I have a scheduled task setup to run the "Peter Rosser MCE Refresh" script every day after the guide update... so my system never gets rebooted.
Before I started beta testing the latest app, I actually had my system up and running for about 7 or so weeks.
PeterV - I'll try the DVB fix in PIMP again... last time I tried it I got errors (in PIMP) straight after and it couldn't re-synch to the server... so at the moment I schedule to do a guide download, close PIMP, run the script, restart PIMP and everything works perfectly.
Regards,
Shane.
Peter - thanks... and more than happy to be here, you may have noticed my threads over at that other board.... hope others come over and start supporting you icetv guys.... anyway expect an email soon, have a few ideas i'd like to see....
I went searching, because I am sure others will want the info - from Shanes post - the "Peter Rosser MCE Refresh" script can be found at http://blogs.msdn.com/peterrosser/archive/2006/02/15/DvbGuideProblem.aspx
Let me say also, that there appears to be some great people in these forums such as Shane that a) know their stuff, and b) willing to help others!
Good on you all....
impact,
Glad you're here - and I have to say thanks to you - your numerous posts "over there" helped me dramatically during my early days as a MCE newbie.
I've been an IceTV convert since the early days and recommend it to everyone I know using Topfields, Media Centers or Elgato EyeTV (on Mac). Being whats known as an "early adopter", I've owned or own all three, and can confidently say I was the first person to get MCE running on a MacBookPro - just not credited for it :)
Regards,
Shane.