PIMPmyMCE for Vista (version 2.02.00) ready for testing

Started by Daniel Hall at IceTV, January 31, 2007, 02:55:32 PM

Previous topic - Next topic

saxnix

Shane,

Thanks for the ctrl G tip for the guide.  It worked, but I realised that my guide wasn't actually working.  Same problem as benaylen.  What version of Ice are you using for the guide, and could you post me a link for it?

Thanks
Greg

Shane

The version I am using is available here:

http://www.icetv.com.au/support.php?faq_id=57

I did a clean install of Vista Premium, Windows Updated until there was nothing left to get, installed all the drivers for my tuner cards etc, then ran Media Center and chose Express setup option from the initial wizard that comes up the first time you run Media Center.

I then exited Media Center and ran the IceTV setup, entering my Ice username and password.

Once done, I closed the web browser window that the IceTV installer opens and opened Media Center, going to Tasks, Settings, TV and chose Setup TV Signal. I followed the steps and it scanned all of my tv stations.

I then went into Edit Channels and chose Clear All, then selected just the channels I wanted in my guide. I then chose save. I then selected "Get Latest Guide Listings" and waited for it to popup saying the guide download was completed.

Then I chose Add Listings to Channel and one by one mapped the Ice Guide data to the channels I had (note you can't map the same Ice Guide Channel to multiple physical channels - ie you can't set Ten to Ten AND Ten 1 etc at the same time).

I then chose save, exited Media Center and installed the Vista Beta of PIMP from here:
http://www.icetv.com.au/index.php?topic=549.0

Once installed, I double clicked the PIMP icon near the clock, added my Ice username and password, hit Test Settings, then set the Device to the one I'd setup in the online PIMP configuration, then hit Save Settings.

I then selected Every 10 Minutes for the Update Frequency, ticked Update MCE Guide for 1pm, ticked Fix Registry keys when changed, and then set the Post Padding to 15mins. Then I hit Save Settings again and clicked the close button on PIMP.

Thats all I did - step by step and mine is working well. I hope following this gets yours working too.

Regards,
Shane.
Shuttle SB83G5M (P4 630 nVidia 6600) running Vista Premium with:
Hauppauge Nova-T 500 MCE Tuner|Ice TV Guide|PIMP|Buffalo LinkStation HD-H160LAN & HD-HG300LAN|Xbox 360 MCE

swspaeje

Thanks for all the above.  I have installed a Vista Home Premium upgrade.  Now trying to set up ICETV.  I installed MCE4 and them PIMP Beta.  Mucked up the channels and rescanned.  Only to find that I am locked into no EPG for the region.  I Uninstalled PIMP Beta but could not find ICE4 to uninstall.  I set the Guide to windows default and tried again to register ICE4  but again got the no Australia EPG message.

What do I need to do to get back on track so that I can follow the excellent advice above.

John

drokich

Mine failed again sorry, Vista went back to the no EPG for your region - sigh.  When the EPG was broken a Vista popup started occuring saying something like "EPG was not able to download", but it kept poping up every 10-15 minutes, it was very anoying. This is a late post as I had to wait for the missus to go to bed so I could access to the Media PC, its getting hard to find a window to schedule media maintanence <lol>.
A few clicks in Pimp and it now looks OK again, I used the Config tab, "Reset Settings" button and it seemed to fix things up for now. 

I don't think the EPG will last though as ICETV has been working before, it just seems to drop out in Vista.   I will post again if it fails or works for over 12 hours :-P

Has anyone in the ICE dev team raised a fault with MS as this is really anoying? Having just bought Vista I am now missing my EPG.
I am reluctant to go back to Media Center 2005 and Media Center 2005's crashing etc just to get back working EPG.

Shane

Dave (Drokich),

Have you ticked the box in PIMP for "Fix Registry Keys When Changed" ? Also - what Update frequency do you have set? I have mine set to 10mins and it works - if yours is longer try changing to 10mins.

The only other thing I have done is enabled the Optimize feature inside Media Center's settings.

Regards,
Shane.

Shuttle SB83G5M (P4 630 nVidia 6600) running Vista Premium with:
Hauppauge Nova-T 500 MCE Tuner|Ice TV Guide|PIMP|Buffalo LinkStation HD-H160LAN & HD-HG300LAN|Xbox 360 MCE

Shane

Quote from: swspaeje on February 04, 2007, 07:52:04 PM
Thanks for all the above.  I have installed a Vista Home Premium upgrade.  Now trying to set up ICETV.  I installed MCE4 and them PIMP Beta.  Mucked up the channels and rescanned.  Only to find that I am locked into no EPG for the region.  I Uninstalled PIMP Beta but could not find ICE4 to uninstall.  I set the Guide to windows default and tried again to register ICE4  but again got the no Australia EPG message.

What do I need to do to get back on track so that I can follow the excellent advice above.

John

John,

Somehow you'll need to remove the programs and possibly the registry keys that Ice and PIMP have installed, and also reset Media Center back to it's original state.

I can't say I know how to do this sorry - as I have a working machine I don't want to mess with it to document what to do :(

Regards,
Shane.
Shuttle SB83G5M (P4 630 nVidia 6600) running Vista Premium with:
Hauppauge Nova-T 500 MCE Tuner|Ice TV Guide|PIMP|Buffalo LinkStation HD-H160LAN & HD-HG300LAN|Xbox 360 MCE

swspaeje

Thanks Shane.  I think that I don;t actually know how to use pimp.  I will remove the Registery ICE and PIMP entrys.

Before I reinstall Vista I think that I will try a few more times. 

So should I install PIMP first?  When I have how do I set it. I obvioulsy have not read the instructions on PIMP use.

After that to I install MCE4 and register before attempting to download the EPG and scanning for channels.

Or is it the other way round, load MCE4 first.

John

Shane

John,

No - definately don't install PIMP first - install IceGuide4MCE first - as per my steps above tune channels etc before doing PIMP.

Regards,
Shane.
Shuttle SB83G5M (P4 630 nVidia 6600) running Vista Premium with:
Hauppauge Nova-T 500 MCE Tuner|Ice TV Guide|PIMP|Buffalo LinkStation HD-H160LAN & HD-HG300LAN|Xbox 360 MCE

drokich

As I posted above "A few clicks in Pimp and it now looks OK again, I used the Config tab, "Reset Settings" button and it seemed to fix things up for now."
So its now been 24 hours and its still workng on Vista, good new so far.
If it plays up again I will change update frequency to 10 minutes, its OK now on 10 hours.

Shane

Dave,

Great news! So the Reset button in PIMP brought it back?

Regards,
Shane.
Shuttle SB83G5M (P4 630 nVidia 6600) running Vista Premium with:
Hauppauge Nova-T 500 MCE Tuner|Ice TV Guide|PIMP|Buffalo LinkStation HD-H160LAN & HD-HG300LAN|Xbox 360 MCE

timble

Hi,

I'm finding that most of my recordings are stopping before they shouls. Eg: Recording stops 8 mins into a 30 min program or 20 mins into a 1 hour prog. Sometimes it works and records the whole show, say 1 in every 4 attempts.

Regards,

Tim

atheo

Hello all,

Thanks for all of the respective posts.  I have followed them....and they assisted me in getting past the region error in Vista (Ultimate) which was my first hurdle.  I actually had to do a fresh install to get this working.....i must have done things out of order previously.

I now just have "no data available" in the guide.

I have downloaded the data, i have added listings to channel (well they were already added....but i re added them), i only have one "version" for each channel (ie not 7 digital, HD SD etc, just one of them), i have told PIMP to update guide, to which it says downloading data and then tells me it was completed succesfully.....

No luck.

Any thoughts.

Thanks in advance

Adam
PS: My install proceedure was Vista, all windows updates, ICETV program (the latest version mentioned in post), PIMP, setup TV signal, RUN PIMP click the fix registry and setup the other preferences

Daniel Hall at IceTV

Quote from: timble on February 07, 2007, 07:28:30 PM
Hi,

I'm finding that most of my recordings are stopping before they shouls. Eg: Recording stops 8 mins into a 30 min program or 20 mins into a 1 hour prog. Sometimes it works and records the whole show, say 1 in every 4 attempts.

Regards,

Tim


Hi Tim,

We are currently investigating the Pre and Post Padding options that are in PIMP as it sounds like they are not working correctly in Vista, for the time being the best option would be to set both of these settings on the configuration page of PIMP to "MCE Default", then "Save Settings" and all the recordings should go back to being the full length.
Regards,

Daniel.
CTO.

timble

Hi Daniel,

Thanks for the reply.

However, MCE Default settings also cause the problem. Just did a test with Madras Magic (60 min show) stopped recording 7 mins in.

Regards,

Tim

blaize

So is there any news on a Vista compliant version of IceTV? I recently upgraded to Vista Home Premium but now my 12 month IceTV subsciption seems to be a waste as it never works  :'(

Thanks

Blaize