IceTV Forum

IceTV Guide for IceTV enabled PVRs => Windows Media Center => Topic started by: Daniel Hall at IceTV on January 31, 2007, 02:55:32 PM

Title: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Daniel Hall at IceTV on January 31, 2007, 02:55:32 PM
The new PIMPmyMCE client (version 2.02.00) is now available as beta.

It can be downloaded from http://www.icetv.com.au/cgi-bin/downloads.cgi?op=get_file&number=13 (http://www.icetv.com.au/cgi-bin/downloads.cgi?op=get_file&number=13).

This version will only work on Vista MCE.

Fixes/Improvements:

A new version will be available with any fixes that are relevant for Windows XP Media Center Edition 2005 once this version has been tested.

Please post any feedback below.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Shane on January 31, 2007, 06:15:42 PM
Daniel (and team),

Installed and testing now (Vista 32bit). I have done a few guide downloads and so far so good. I've got some series recordings happening tonight so shall see how the padding goes.

Note: I've reversed impact's workaround (http://www.icetv.com.au/index.php?topic=540.0) so I'll be watching for guide corruption now too.

Good work (for the moment - I'll update if otherwise) guys.

Regards,
Shane.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: drokich on February 01, 2007, 01:42:05 PM
2.02.00 Beta didn't work for me unfortunetly, and yes I am running on Vista MCE. ICE sw installed OK, took my user ID and password OK and seemed to add EPG after going through the wizard once. But unfortunetly a channel was missing after my first scan and when I scanned again (I needed a second scan as channel 9 was missing) it had lost the EGP for all but channel 2.  It got worse as when I then tried to download EPG it now states that my country does not have EPG data, sigh.

I run the Start menu icon and re-insert my ICE user ID and password but MCE Vista still can not find any EPG for Australia :-(.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Daniel Hall at IceTV on February 01, 2007, 02:49:11 PM
Hi drokich,

Was this for Vista MCE x86 or Vista MCE 64-bit?
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: drokich on February 01, 2007, 03:58:16 PM
I used Vista MCE x86, the MSDN version.

I am re-installing Home Pro Vista MCE now with a standard licenced to see if this helps. Once Vista is installed I will try ICE again.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: drokich on February 01, 2007, 04:57:33 PM
Sorry no go, the new Vista install does not download EPG via ICE either, on download in MCE is keeps saying :-
Discovery Service: Unsupported contry/region. Select Setup to configure the guide

Note: I have set all location settings in Vista to Australia.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Daniel Hall at IceTV on February 01, 2007, 05:06:54 PM
Hi drokich,

Have you installed and run the IceGuide4MCE setup program first before trying to setup the guide in Vista MCE?

I forgot to mention this above but the best method would be to follow the steps:

Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: drokich on February 01, 2007, 07:55:57 PM
It’s working Hooray.
It was an issue with assigning the EPG channels with the actual TV channel that caused me issues.  By default the TV channel name came up in the ICE supplied EGP list and I just left it on the default EPG name. But the actual EPG list had additional selections for the channels and if I select those it works (ie when assigning EPG to a channel use just "Nine" and do not use "Digital Nine").

Oh and as suggested I also installed IceGuide4MCE and reinstalled PIMPmyMCE client (version 2.02.00).

PS. You can use Dave in posts.  :)
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Leroy on February 02, 2007, 03:33:41 PM
This version worked for me on Vista Ultimate. Great stuff.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Shane on February 02, 2007, 06:17:15 PM
Have to say - Vista Media Center is rock solid - with PIMP running with IceGuide, I've had no issues and no need for a reboot - MCE 2005 wasn't even running this well. The built-in HDTV decoder is working well too (so WinDVD, PowerDVD or Purevideo no longer required).

Sure I have some minor issues (folder duplication in Videos library the main one), but so far I'm honestly surprised at how well this has worked.

Regards,
Shane.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: helpware on February 02, 2007, 11:31:37 PM
Just installed it. Seems to be working well. Thanks guys!

Concerned a little by the large memory footpint (11.3 MB)

Rob


Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Daniel Hall at IceTV on February 03, 2007, 12:07:45 AM
Quote from: helpware on February 02, 2007, 11:31:37 PM
Concerned a little by the large memory footpint (11.3 MB)

Thats after some cleanup actually, we are still checking for any more memory optimizations that can be done, but some of the initial builds were getting up to over 100MB used at times...
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: saxnix on February 03, 2007, 11:43:46 AM
Hi, newbie Greg here,

I have loaded and assigned channels fine, but for the life of me I can't figure out how to use the Guide with keyboard and mouse???

Any suggestions would be great

PS Vista 32bit
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Shane on February 03, 2007, 12:13:26 PM
Here are the keyboard shortcuts for using Media Center with a keyboard. Hope it helps :)

Regards,
Shane.

Move up                                     UP ARROW
Move down                             DOWN ARROW
Move left                                LEFT ARROW
Move right                               RIGHT ARROW
Select                                          ENTER or SPACEBAR
Jump back one page at a time       PAGE UP
Jump ahead one page at a time      PAGE DOWN
Start Media Center                    Windows logo key+ALT+ENTER
Go back to the previous screen or backspace a single character in Search   BACKSPACE

Change to a specific channel        The number for the channel you want
Move up one channel                 EQUAL (=) or CTRL+EQUAL
Move down one channel               MINUS (-) or CTRL+MINUS

My TV            CTRL+SHIFT+T
My Music   CTRL+M
My Videos   CTRL+E
My Pictures   CTRL+I

Guide             CTRL+G
Record            CTRL+R
Details             CTRL+D
DVD Menu       CTRL+SHIFT+M
Recorded TV   CTRL+O
DVD Audio   CTRL+SHIFT+A
DVD Subtitle   CTRL+U

Pause             CTRL+P
Play              CTRL+SHIFT+P
Stop              CTRL+SHIFT+S
Replay             CTRL+B
Skip              CTRL+F
Rewind            CTRL+SHIFT+B
Fast Forward   CTRL+SHIFT+F
Mute              F8
Volume Down   F9
Volume Up   F10
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Shane on February 03, 2007, 03:16:27 PM
Try removing it all, resetting Media Center back to defaults (reset guide etc), and then just install IceTV and run the "Scan Channels". Once done, then choose "update guide data" to get the latest feed, and then map your channels.

If this works, then install PIMP.

Regards,
Shane.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: saxnix on February 03, 2007, 08:22:39 PM
Shane,

Thanks for the ctrl G tip for the guide.  It worked, but I realised that my guide wasn't actually working.  Same problem as benaylen.  What version of Ice are you using for the guide, and could you post me a link for it?

Thanks
Greg
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Shane on February 03, 2007, 10:30:31 PM
The version I am using is available here:

http://www.icetv.com.au/support.php?faq_id=57

I did a clean install of Vista Premium, Windows Updated until there was nothing left to get, installed all the drivers for my tuner cards etc, then ran Media Center and chose Express setup option from the initial wizard that comes up the first time you run Media Center.

I then exited Media Center and ran the IceTV setup, entering my Ice username and password.

Once done, I closed the web browser window that the IceTV installer opens and opened Media Center, going to Tasks, Settings, TV and chose Setup TV Signal. I followed the steps and it scanned all of my tv stations.

I then went into Edit Channels and chose Clear All, then selected just the channels I wanted in my guide. I then chose save. I then selected "Get Latest Guide Listings" and waited for it to popup saying the guide download was completed.

Then I chose Add Listings to Channel and one by one mapped the Ice Guide data to the channels I had (note you can't map the same Ice Guide Channel to multiple physical channels - ie you can't set Ten to Ten AND Ten 1 etc at the same time).

I then chose save, exited Media Center and installed the Vista Beta of PIMP from here:
http://www.icetv.com.au/index.php?topic=549.0

Once installed, I double clicked the PIMP icon near the clock, added my Ice username and password, hit Test Settings, then set the Device to the one I'd setup in the online PIMP configuration, then hit Save Settings.

I then selected Every 10 Minutes for the Update Frequency, ticked Update MCE Guide for 1pm, ticked Fix Registry keys when changed, and then set the Post Padding to 15mins. Then I hit Save Settings again and clicked the close button on PIMP.

Thats all I did - step by step and mine is working well. I hope following this gets yours working too.

Regards,
Shane.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: swspaeje on February 04, 2007, 07:52:04 PM
Thanks for all the above.  I have installed a Vista Home Premium upgrade.  Now trying to set up ICETV.  I installed MCE4 and them PIMP Beta.  Mucked up the channels and rescanned.  Only to find that I am locked into no EPG for the region.  I Uninstalled PIMP Beta but could not find ICE4 to uninstall.  I set the Guide to windows default and tried again to register ICE4  but again got the no Australia EPG message.

What do I need to do to get back on track so that I can follow the excellent advice above.

John
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: drokich on February 05, 2007, 03:48:45 AM
Mine failed again sorry, Vista went back to the no EPG for your region - sigh.  When the EPG was broken a Vista popup started occuring saying something like "EPG was not able to download", but it kept poping up every 10-15 minutes, it was very anoying. This is a late post as I had to wait for the missus to go to bed so I could access to the Media PC, its getting hard to find a window to schedule media maintanence <lol>.
A few clicks in Pimp and it now looks OK again, I used the Config tab, "Reset Settings" button and it seemed to fix things up for now. 

I don't think the EPG will last though as ICETV has been working before, it just seems to drop out in Vista.   I will post again if it fails or works for over 12 hours :-P

Has anyone in the ICE dev team raised a fault with MS as this is really anoying? Having just bought Vista I am now missing my EPG.
I am reluctant to go back to Media Center 2005 and Media Center 2005's crashing etc just to get back working EPG.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Shane on February 05, 2007, 08:22:42 AM
Dave (Drokich),

Have you ticked the box in PIMP for "Fix Registry Keys When Changed" ? Also - what Update frequency do you have set? I have mine set to 10mins and it works - if yours is longer try changing to 10mins.

The only other thing I have done is enabled the Optimize feature inside Media Center's settings.

Regards,
Shane.

Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Shane on February 05, 2007, 08:29:00 AM
Quote from: swspaeje on February 04, 2007, 07:52:04 PM
Thanks for all the above.  I have installed a Vista Home Premium upgrade.  Now trying to set up ICETV.  I installed MCE4 and them PIMP Beta.  Mucked up the channels and rescanned.  Only to find that I am locked into no EPG for the region.  I Uninstalled PIMP Beta but could not find ICE4 to uninstall.  I set the Guide to windows default and tried again to register ICE4  but again got the no Australia EPG message.

What do I need to do to get back on track so that I can follow the excellent advice above.

John

John,

Somehow you'll need to remove the programs and possibly the registry keys that Ice and PIMP have installed, and also reset Media Center back to it's original state.

I can't say I know how to do this sorry - as I have a working machine I don't want to mess with it to document what to do :(

Regards,
Shane.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: swspaeje on February 05, 2007, 08:46:54 PM
Thanks Shane.  I think that I don;t actually know how to use pimp.  I will remove the Registery ICE and PIMP entrys.

Before I reinstall Vista I think that I will try a few more times. 

So should I install PIMP first?  When I have how do I set it. I obvioulsy have not read the instructions on PIMP use.

After that to I install MCE4 and register before attempting to download the EPG and scanning for channels.

Or is it the other way round, load MCE4 first.

John
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Shane on February 05, 2007, 10:31:11 PM
John,

No - definately don't install PIMP first - install IceGuide4MCE first - as per my steps above tune channels etc before doing PIMP.

Regards,
Shane.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: drokich on February 06, 2007, 01:59:32 AM
As I posted above "A few clicks in Pimp and it now looks OK again, I used the Config tab, "Reset Settings" button and it seemed to fix things up for now."
So its now been 24 hours and its still workng on Vista, good new so far.
If it plays up again I will change update frequency to 10 minutes, its OK now on 10 hours.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Shane on February 06, 2007, 07:59:21 AM
Dave,

Great news! So the Reset button in PIMP brought it back?

Regards,
Shane.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: timble on February 07, 2007, 07:28:30 PM
Hi,

I'm finding that most of my recordings are stopping before they shouls. Eg: Recording stops 8 mins into a 30 min program or 20 mins into a 1 hour prog. Sometimes it works and records the whole show, say 1 in every 4 attempts.

Regards,

Tim
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: atheo on February 08, 2007, 10:28:38 AM
Hello all,

Thanks for all of the respective posts.  I have followed them....and they assisted me in getting past the region error in Vista (Ultimate) which was my first hurdle.  I actually had to do a fresh install to get this working.....i must have done things out of order previously.

I now just have "no data available" in the guide.

I have downloaded the data, i have added listings to channel (well they were already added....but i re added them), i only have one "version" for each channel (ie not 7 digital, HD SD etc, just one of them), i have told PIMP to update guide, to which it says downloading data and then tells me it was completed succesfully.....

No luck.

Any thoughts.

Thanks in advance

Adam
PS: My install proceedure was Vista, all windows updates, ICETV program (the latest version mentioned in post), PIMP, setup TV signal, RUN PIMP click the fix registry and setup the other preferences
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Daniel Hall at IceTV on February 08, 2007, 11:01:22 AM
Quote from: timble on February 07, 2007, 07:28:30 PM
Hi,

I'm finding that most of my recordings are stopping before they shouls. Eg: Recording stops 8 mins into a 30 min program or 20 mins into a 1 hour prog. Sometimes it works and records the whole show, say 1 in every 4 attempts.

Regards,

Tim


Hi Tim,

We are currently investigating the Pre and Post Padding options that are in PIMP as it sounds like they are not working correctly in Vista, for the time being the best option would be to set both of these settings on the configuration page of PIMP to "MCE Default", then "Save Settings" and all the recordings should go back to being the full length.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: timble on February 10, 2007, 08:44:58 PM
Hi Daniel,

Thanks for the reply.

However, MCE Default settings also cause the problem. Just did a test with Madras Magic (60 min show) stopped recording 7 mins in.

Regards,

Tim
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: blaize on February 10, 2007, 11:01:10 PM
So is there any news on a Vista compliant version of IceTV? I recently upgraded to Vista Home Premium but now my 12 month IceTV subsciption seems to be a waste as it never works  :'(

Thanks

Blaize
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Shane on February 10, 2007, 11:13:01 PM
blaize,

Not sure what you mean by this - I have Vista Home Premium working perfectly with IceTV as my guide. In fact my Media Center has never been this stable before.

Can you detail what you mean by "it never works"? What have you done/tried?

Regards,
Shane.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Leroy on February 12, 2007, 02:04:08 PM
Quote from: timble on February 10, 2007, 08:44:58 PM
Hi Daniel,

Thanks for the reply.

However, MCE Default settings also cause the problem. Just did a test with Madras Magic (60 min show) stopped recording 7 mins in.

Regards,

Tim

I have the same problem. If I schedule recordings on the MCE then it works fine with the MCE defaults, but if scheduled via PIMP then the shows don't record to their full length. Yesterday I scheduled a 30 minute recording of a cycling show 5.30pm on SBS. Stopped recording 13 minutes in.

Whats the story ICE??
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: dalzine on February 12, 2007, 09:38:48 PM
I am having the same problem. I tried recording Top Gear tomight (SBS 7:30) and it stopped recording 16 minutes in. However I'm not using Vista, I'm using MCE2005. I don't know if this is any help but one thing I noticed is that I had the series scheduled on my MCE as well as scheduled through PIMP, maybe there's a conflict that's causing this?

Dale.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Daniel Hall at IceTV on February 13, 2007, 12:05:36 PM
It looks like the problems recording a full show have to do with the padding.

I'm currently testing a new version now that should have these issues fixed, If everything goes to plan we hope to have this posted today for people to try.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: Daniel Hall at IceTV on February 13, 2007, 04:52:34 PM
Just to update this new version will not make it out today, but we are closer to the next beta release.

We will post any updates as soon as we have them.
Title: Re: PIMPmyMCE for Vista (version 2.02.00) ready for testing
Post by: dropbear on February 23, 2007, 11:13:03 PM
I can also report that I have followed shanes post on how to configure icetv and it doesnt show any channels in the guide at all ;(

Im using ultimate x64 if that makes any difference.