Hey all,
I have been doing more testing of scheduling through interactive and found that on a dual tuner set up with pre/post padding set at 10m/15m respectively 'when possible' I get the yellow triangle error message displayed for the 'series 2' example below.
Guide would look like this....
[----------series 1 / channel A -----]
[-----series 2 / channel B-----][-----series 2 / channel B-----]
Normally if this was scheduled within WMC all would record. I am guessing that interactive maybe applying the padding to each show individually?
Will try a few other options.
Nudge
Now I am stumped ???, I removed series 1 from the schedule, resent series 2 and I am still getting yellow error triangle. So its either
- channel mapping / matching?
- back to back recordings of the same series?
Will keep testing.
Nudge
EDIT - resolved - it was a channel mapping issue, for some reason the 'channel-IceTV' name had reverted to the inband naming and the IceTV version wasn't available to select. Had to reset and scan all channels again, disable all inband first, then install ICE.
I would be interested in having a look at your logfile.
Cheers
Luke,
I attached a snip of the log file from the machine affected. I removed the older log info and kept from when 3.0.0.10 was detected as a new version till now.
I ended up resolving the issue, was related to 7TWO-IceTv being replaced by 7TWO on Prime.
All 3 machines are now in full interactive scheduling mode, I don't do any local scheduling.
Later,
Nudge