My Toppy 5000 has begun showing only the guide for the station selected when it is switched on. To get guide up for another station I have to move to selected channel, switch off PVR, then when I switch on again the guide for that channel only becomes available. Anyone know why this is so? Seems to be updating as usual at 7pm each night through ethernet cable.
Sounds like you are no longer running the ICE (or EPG_uploader) TAP, and thus the stock broadcaster 1-7day guide is being received (all broadcasters send some kind of EIT/EPG these days apart from SBS with now&next only, although the quality of the guide from them is not a patch on what ICE has to offer).
Regards
This sounds more like the IceTV tap is on there, but that the guide data is not being updated.
The IceTV tap will block EIT and would explain why you have to power off and back on to see this as it will only load the info that the Topfield is tuned to when turning on before the IceTV tap loads, however you should also ensure that all the guide information doesn't just load up after the IceTV tap has been loaded for 1 minute (there is a 1 minute delay on loading guide data from when the IceTV splash screen is displayed).
The next thing to check is that there are guide files in the "/ICE" folder on the Topfield, if the updates are going through you will see files in there (one for each day).
This is exactly what has been happening to me over the last couple of days.
My renewal wasup and when I eventually got around to paying (after 7 days) i havent had the updates working very well.
To make matters worse I cant log on to the wireless bridge (Asus I think) and cant figure what is wrong as I havent changed any of the settings.
???
Hi,
The exact same thing has happened to me with my 5000MP and Icebox2 (Asus). Is there a fix?
I gave up as IceTV couldnt help me so I went and bought the 7100.
Thanks for answering :) I was thinking of upgrading to the 7100 soon anyway. If I do I might use the 7100's wired connection via one of the ethernet over power setups that have come on the consumer market lately (i.e. Netcomm NP201AV HOMEPLUG TWIN PACK ). Having Mac computers at home, I remember what a hassel it was setting up the ASUS to connect to my Apple wireless basestation(router).
The wireless connection with the 7100 took me a little bit of fiddling, though i suspect my adsl modem/router was initially the problem, it didnt seem to find the wireless connection a lot of the time. The modem ended up stopping working altogether, ie it wouldnt pick up the adsl conection. I have since bought a new modem/router and have not had a problem at all. i got one of the newer ones with the stronger signal.
I think the 7100 is easier to set up than than Asus bridge with the 5000, as everything is setup via the menu otions.
good luck
Thanks. BTW, did you consider one of the beyonwiz models instead of the new Topfield?
No i didnt, I dont know anyone that has one and they seem to be a bit more expensive for the wireless model. I love the 320g HD in the topfield, I have not run out of room for recording at all.