TF7100 No channel Map Data error

Started by pauliking, August 17, 2008, 08:46:40 PM

Previous topic - Next topic

gadgetchick

I still intermittently get the 'no channel map data'  'please reload guide'  and I am running the latest firmware....


Daniel Hall at IceTV

After turning on the Topfield you will probably get the "No Channel Map data" error for the first minute or so, it seems to take that long to startup all services in the Topfield, download the guide from the IceTV website and then process the guide data and display it in the guide, however if when you turn the Topfield back on it is within 1 hour of the last successful guide fetch it will fail and this error can be seen for longer than just the first minute until the hour limit is up, then it will just come through.
Regards,

Daniel.
CTO.

mooshla

Hi,
I am having troiuble with my Topfield TF7100HDPVRt.  I have only had it 3 weeks or so.  It was working perfectly but when turning it on, it appears to lose all its channels and just comes up with the Menu with only System Setting, Installation etc.  I have to re-install the channels.  This has happened 3 times now, twice in 2 days.

Is there anyone else having this problem and now how to resolve it?

Cheers, Moosh.


jeffg82

Quote from: mooshla on January 16, 2009, 08:17:50 AM
Hi,
I am having troiuble with my Topfield TF7100HDPVRt.  I have only had it 3 weeks or so.  It was working perfectly but when turning it on, it appears to lose all its channels and just comes up with the Menu with only System Setting, Installation etc.  I have to re-install the channels.  This has happened 3 times now, twice in 2 days.

Is there anyone else having this problem and now how to resolve it?

Cheers, Moosh.



Also having same problem. Had PVR since before Christmas and was working fine with no network settings and just basic EPG. This week decided that with the new Firmware IceTV (Beta copy) seemed to be a bit more stable so decided to setup. Using wireless connection (DHCP), and had no problems setting up following all tips from other users. Program guide loaded straight away but had too turn Unit off and back on to receive timers from IceTV. Everything seemed to be working fine, PVR would startup from standby and record show. Last night I was watching a recording and a timer started to record another show. When I had finished watching my show the recording was still going so I asked the wife to check to see if it was finished before she went to bed and if so turn off. I started PVR up this morning and was presented with Menu with no channels or timers. All other settings were still correct. Rescanned Channels and retrieved EPG data. Left Unit on to Download timers from IceTV. I had a show set to record this morning so I called the wife to check if it was recording. It wasn't so I asked her to turn Unit off (via remote) and back on again. Presented again with Menu and no channels or timers? ??? ???
As PVR was working fine with no other problems it seems to either be network or IceTV related.

Any suggestions welcome.

Jeff

wally3218

I've just upgraded to latest offical firmware (v1.11.29) and rescanned all my channels.
Icetv interactive has sent down all my timers but I can't get any epg it just somes pops up with " "ICETV server is busy channel map data can't be received ...Please Wait...Retry after 2 minutes."
I have tried waiting but it's not comming thru.
Do I have to have the channel list in any specific order, for example as listed in my account tv guide settings.
Any suggestions,
SONY KLV40S200 - 40 inch S series Bravia LCD TV
SONY DVPNS78H - DVD PLAYER
TOPFIELD TRF 2460
TOPFIELD TF7100PVRT
TOPFIELD TF5000PVRT
WDTV Live Streaming
Billion7300GRA  Windows 7 64bit

hallycat

Quote from: pauliking on August 17, 2008, 08:46:40 PM
I have been having issues with Icetv guide. I know there will be a firmware update, but would like to report my errors here so they can be considered by the two companies involved.

2 issues have been happening.

1) Every now and then the guide just will not load, keeps saying "no channel map data" , "please reload guide". No idea how you are supposed to do that. have left it for a few hours to see if it updates itself and nothing happened. Only way I got it to go again was perform factory reset and then had to set up the network and ftp settings again.

2) Whenever the icetv is enabled and I go to guide, it sometimes freezes and will not exit out. Even the scrolling display on the front of the unit stops scrolling. I have to power down via the remote and reboot.

I am having the exact same issues. The guide disappeared, I did a factory reset today and entered all the data for my IceTV account and am still waiting for a guide despite the fact that there have been three fetches since then. I have no timers now and no guide at all. What do we do now?

ibrox

hallycat : Sounds like you have a similar issue to me, all of a sudden it stopped working, its been working fine for months up until this weekend.

I've posted a topic in the general section, hoping someone can shed some light on it.

Vortical

Mine has also stopped working over the weekend

Daniel Hall at IceTV

We have performed some tests on the firmware and loading the guide and it appears that the Topfield have a fixed length for descriptions of 1024 bytes. There is a description longer than that in the guide at the moment.

We have artificially limited the description field for the Topfield now to 1024 bytes and we are currently testing this on the currently released firmwares to confirm that this is working for all firmware versions.
Regards,

Daniel.
CTO.

Daniel Hall at IceTV

This has been tested on the currently released firmwares and has fixed the issue.
Regards,

Daniel.
CTO.

delco

NOT FIXED AT THIS END.

been having issues all weekend , talked to tech support and they said to restore to factory defaults and resetup , did that and lost all channels as well as interactive , then told to download a new version , 3 hrs later I now have no guide or tv channels.

Eventually after going back to ver 29 I got the tv channels working but no guide or interactive.

ICETV - bah this is not a system that should have been released commercially , the worst thing is I bought the 7100 from ICE thinking wrongly that it was a system that worked.

would I buy a 7100 again NO way , will I resign for IceTV again -NO way in its present form.

There also seems to be huge issues with the icetv website , the topfield alwasy says the server is busy and when on the web using interactive 90% of the time it gets a lserver timeout  problem and you have to make 5 or 6 attempts to set a program to record

Blathuder

I am having same, similar problems. Went to iTopfield forum site. Dont bother, it is under construction.
This machine would have to be the most frustrating experience I have ever had. Setting up my PS3 was sooo easy. I cant believe that these people have made setting up so difficult.  I should have bought the TiVo instead.

kidhazy

#27
Quote from: Blathuder on March 11, 2009, 08:23:36 PM
I am having same, similar problems. Went to iTopfield forum site. Dont bother, it is under construction.
....
The Topfield website default page is stuffed.  Try http://forum.itopfield.com.au/default.aspx  and you'll get to the forum.



Can I also say I had the "No channel map" error on Saturday morning.  I left the Topfield on for just over 1 hour.  I checked the My Account page on the ICETV website to make sure it had re-grabbed the EPG after an hour (which it did) and all is now fine.
Thanks,
kidhazy.

Vortical

Quote from: delco on March 09, 2009, 05:31:02 PM
NOT FIXED AT THIS END.

It's all fixed here using 1.00.45beta without the need for a factory reset
Although I had mine on FTA TV and gave it a few days before I switched back to Ice after the fix was announced.

wireless

Quote from: Vortical on March 17, 2009, 12:53:06 PM
Quote from: delco on March 09, 2009, 05:31:02 PM
NOT FIXED AT THIS END.

It's all fixed here using 1.00.45beta without the need for a factory reset
Although I had mine on FTA TV and gave it a few days before I switched back to Ice after the fix was announced.

Loosely classed as 'fixed' don't you think?  Considering the firmware and IceTV are not Beta or RC you would expect the EPG to work straight away not in a few days?

My PVR has been running since the weekend and still says the server is busy.