I have been having issues with Icetv guide. I know there will be a firmware update, but would like to report my errors here so they can be considered by the two companies involved.
2 issues have been happening.
1) Every now and then the guide just will not load, keeps saying "no channel map data" , "please reload guide". No idea how you are supposed to do that. have left it for a few hours to see if it updates itself and nothing happened. Only way I got it to go again was perform factory reset and then had to set up the network and ftp settings again.
2) Whenever the icetv is enabled and I go to guide, it sometimes freezes and will not exit out. Even the scrolling display on the front of the unit stops scrolling. I have to power down via the remote and reboot.
My 7100 has just started doing the same thing after a week of working fine!
I've recreated the device (with a different name) on the IceTV Interactive site, and the change has been picked up by the Toppy, but still no change in the guide. :-[
Same thing happened to me. I am wondering whether it is the Interactive stuff that is upsetting the system.
My toppy worked fine for two weeks then today I lost all settings for Ice 3 times and it got harder and harder to load the map.
There is definitely a bug in the current TF7100 firmware. :'(
From all accounts on DTV forum and Whirlpool (still not many yet) those complaining have all had exactly the same problem.
The 7100 is a very new PVR and most people have only had them for a couple of weeks or so...my guess is that there will be many more to find this problem in the coming weeks.
I will ring TF on Monday to let them know.
I only know of one person who has called them about this and he suggested I call them as he was the only person to have complained about this problem so far.
I would advise that anyone having the problem let them know at TF so they realise it is a serious problem.
Has anyone had their TF7100 just lose ALL the settings. I've gone to turn mine on this morning and it was like I just pulled it out of the box. Had to do the whole setup again. Didn't lose my recordings though.
Unfortunately Topfield have not yet finished full integration of IceTV for the TF7100. They have been made aware of some Channel Mapping issues (namely Ch10HD and ABC1).
We had hoped this would have been done prior to launching their new product and we are obviously eagerly anticipating the release of a stable firmware which supports all of IceTV's Interactive features. We have been testing the latest firmware, but unfortunately there are still some minor issues needed to be resolved by their software engineers before you can utilise all of IceTV's features to their full capabilities.
We expect this development to be completed in the coming days and as soon as we have had adequate time to test their latest software we will notify all TF7100 users via email. Please register your interest via our "Contact Us" page (Title the query "TF7100" and direct it to "Sales"). (http://www.icetv.com.au/cgi-bin/webpage.cgi?op=show_contact)
As many customers received a Free 3 month Gift Subscription with the device as part of their purchase, we want to ensure that you get the best experience from IceTV and from your Free subscription.
There was an issue with LCN's for Ch10HD and ABC1 in Sydney and Topfield have added a channel mapping feature for these channels. If you have further questions regarding the progress with their firmware update or would like to alert them to possible Channel Mapping issues we suggest you call Topfield directly on 1300 766 440 as unfortunately we have no control or influence over the development work or the time needed to complete it.
Regards,
IceTV
And another one....
I have been using Icetv interactive on my new 7100 quite happily for 2 weeks now without any problem. On Friday evening, I switched on the unit and it went into system settings. It had lost most of my settings (all my network but not my IceTV user stuff). Set all that up again but I kept getting "no channel map data" , "please reload guide". It wouldn't reload the epg so I left it for a few hours to see if it would eventually refresh itself. No joy - I just finished a factory reset and everything is back to normal.
Several times during that time the remote would do nothing except let me power off the 7100. After powering again, I could change channels, etc until it locked up again a few hours later.
Hope the promised upgrade fixes thing. Maybe I should have gone for the Beyonwiz.
The Beyonwiz has its quirks with respect to media file (and DVD) playback, but thankfully the PVR aspects are pretty bullet proof (the media stuff is pretty good still, don't get me wrong). I sooooo much wanted to keep supporting the Topfield after all the years of supporting the 5K, but the 7K specifications and early purchaser reports were a real dissapointment, so I decided to sit tight and wait. Then the Beyonwiz came along at a price too good to refuse, but I think (apart from the excellent stuff DeAngelis has done for the enhancement of the 7100 interface, and has a lot of potential!!) is the better box of the two.
And works 99% for ICE here in Sydney at least (just the rescheduled stuff seems to be an issue as I don't think ICE sends deletes/moves thru).
Regards
Some good news everyone...
Topfield have recently flown out their engineers from Korea and are now actively working on fixing the current firmware problems for the TF7100 and will look to release an update that reliably supports IceTV Interactive in the near future, so that everyone can start to truly enjoy the benefits of IceTV.
We will update everyone as soon as there is any further information regarding the necessary development work needed to be carried out.
Fingers crossed it will not take Topfield too much longer.
Regards,
mattk
Hi All,
I just got my 7100 set up on my home network with ICETV registered and connecting through and I am having the same issues as everyone here. When iItry and fetch the guide it says "No Channel Map data"......whatever that means.
I am running application version 1.11.10 and firmware version 1.0.15. What is everyone else running?
Does anyone know how to get around this error message? I'm keen to start using ICETV.
Also what is the latest firmware for the 7100? I have heared that there is a 1.0.17? Is anyone running this? does it fix the ICETV issues?
Many thanks
Glenn
Quote from: glennbec on October 08, 2008, 10:04:53 PM
Also what is the latest firmware for the 7100? I have heared that there is a 1.0.17? Is anyone running this? does it fix the ICETV issues?
Hi Glenn,
We are testing yet another firmware update from Topfield (v1.11.21) and so far it is looking OK but not all the issues have been resolved, so it is still not yet ready for IceTV.
If you want access to the latest firmware you will need to contact Topfield directly on 1300 766 440 and request it.
There are some minor issues needed to be resolved by their engineers before the software is stable enough for consumers to reliably utilise all of IceTV's features.
From correspondence with Topfield we expect this development to be completed in the near future and as soon as we have had adequate time to test their latest software we will email you so that you can start your free 3 month subscription. We want to ensure that you get the best experience from IceTV and from your free subscription.
If you have further questions regarding the progress we suggest you call Topfield directly on 1300 766 440 as unfortunately we have no control or influence over the development time needed to complete this work.
We apologise for any inconvenience this delay from Topfield may cause and we will notify you of the good news as soon as we can.
Regards,
IceTV
Hi guys I've been as frustrated as everyone else trying to get this working I have found a lot of support on the http://forum.itopfield.com.au site This was posted recently.
QuoteBluesuede (2008-09-14)
--------------------------------------------------------------------------------
Guys...please remember if you are going to try the beta software..always ALWAYS do a full factory reset after the new firmware is loaded and when doing so have it remove all channel and timer information. Then rescan all services and re-set up your PVR. Wait for the IceTV guide to load before checking LCN mapping (this can take quite a while, so leave it for an hour or so), and ensure you do a "resend all recordings" from the IceTV site if you have timer recordings already set there.
I would not recommend you trial beta firmware if you aren't prepared to set up the PVR from scratch once you've loaded it. And you must always bear in mind that this is not official release firmware, so if you aren't confident with setting everything up and having other potential bugs surface, then please just wait for the final release version.
Cheers
You can get V1.00.19 from http://www.filefactory.com/file/957533/n/1_00_19_upd
I dont know who are more frustrated the users of TF7100 or IceTV staff.
Goodluck,
Wally
Quote from: wally3218 on October 13, 2008, 05:00:19 PM
Hi guys I've been as frustrated as everyone else trying to get this working I have found a lot of support on the http://forum.itopfield.com.au site This was posted recently.
QuoteBluesuede (2008-09-14)
--------------------------------------------------------------------------------
Guys...please remember if you are going to try the beta software..always ALWAYS do a full factory reset after the new firmware is loaded and when doing so have it remove all channel and timer information. Then rescan all services and re-set up your PVR. Wait for the IceTV guide to load before checking LCN mapping (this can take quite a while, so leave it for an hour or so), and ensure you do a "resend all recordings" from the IceTV site if you have timer recordings already set there.
I would not recommend you trial beta firmware if you aren't prepared to set up the PVR from scratch once you've loaded it. And you must always bear in mind that this is not official release firmware, so if you aren't confident with setting everything up and having other potential bugs surface, then please just wait for the final release version.
Cheers
You can get V1.00.19 from http://www.filefactory.com/file/957533/n/1_00_19_upd
I dont know who are more frustrated the users of TF7100 or IceTV staff.
Goodluck,
Wally
Yeah if I was ICETV company I would be extremely pissed as the Topfield product is making it look bad to first time users. I know the ICETV is great and works flawlesly as I have used it on a mediacentre before no probs. But many others haven't had the joy before.
Topfield TF7100HDPVRt firmware released.
More information available in our new section at http://www.icetv.com.au/news/?p=221 (http://www.icetv.com.au/news/?p=221)
i have downloaded the latest firmware today and i still get this error. my topfield 7100 connects and says success when i try to connect bu i can not get any info for the epg. so to me the firmware update has not worked.
michael
I downloaded the firmware update (v 1.11.13) and then did a factory reset and rescanned the channels, re-setup my network data and all is now working OK.
I still intermittently get the 'no channel map data' 'please reload guide' and I am running the latest firmware....
After turning on the Topfield you will probably get the "No Channel Map data" error for the first minute or so, it seems to take that long to startup all services in the Topfield, download the guide from the IceTV website and then process the guide data and display it in the guide, however if when you turn the Topfield back on it is within 1 hour of the last successful guide fetch it will fail and this error can be seen for longer than just the first minute until the hour limit is up, then it will just come through.
Hi,
I am having troiuble with my Topfield TF7100HDPVRt. I have only had it 3 weeks or so. It was working perfectly but when turning it on, it appears to lose all its channels and just comes up with the Menu with only System Setting, Installation etc. I have to re-install the channels. This has happened 3 times now, twice in 2 days.
Is there anyone else having this problem and now how to resolve it?
Cheers, Moosh.
Quote from: mooshla on January 16, 2009, 08:17:50 AM
Hi,
I am having troiuble with my Topfield TF7100HDPVRt. I have only had it 3 weeks or so. It was working perfectly but when turning it on, it appears to lose all its channels and just comes up with the Menu with only System Setting, Installation etc. I have to re-install the channels. This has happened 3 times now, twice in 2 days.
Is there anyone else having this problem and now how to resolve it?
Cheers, Moosh.
Also having same problem. Had PVR since before Christmas and was working fine with no network settings and just basic EPG. This week decided that with the new Firmware IceTV (Beta copy) seemed to be a bit more stable so decided to setup. Using wireless connection (DHCP), and had no problems setting up following all tips from other users. Program guide loaded straight away but had too turn Unit off and back on to receive timers from IceTV. Everything seemed to be working fine, PVR would startup from standby and record show. Last night I was watching a recording and a timer started to record another show. When I had finished watching my show the recording was still going so I asked the wife to check to see if it was finished before she went to bed and if so turn off. I started PVR up this morning and was presented with Menu with no channels or timers. All other settings were still correct. Rescanned Channels and retrieved EPG data. Left Unit on to Download timers from IceTV. I had a show set to record this morning so I called the wife to check if it was recording. It wasn't so I asked her to turn Unit off (via remote) and back on again. Presented again with Menu and no channels or timers? ??? ???
As PVR was working fine with no other problems it seems to either be network or IceTV related.
Any suggestions welcome.
Jeff
I've just upgraded to latest offical firmware (v1.11.29) and rescanned all my channels.
Icetv interactive has sent down all my timers but I can't get any epg it just somes pops up with " "ICETV server is busy channel map data can't be received ...Please Wait...Retry after 2 minutes."
I have tried waiting but it's not comming thru.
Do I have to have the channel list in any specific order, for example as listed in my account tv guide settings.
Any suggestions,
Quote from: pauliking on August 17, 2008, 08:46:40 PM
I have been having issues with Icetv guide. I know there will be a firmware update, but would like to report my errors here so they can be considered by the two companies involved.
2 issues have been happening.
1) Every now and then the guide just will not load, keeps saying "no channel map data" , "please reload guide". No idea how you are supposed to do that. have left it for a few hours to see if it updates itself and nothing happened. Only way I got it to go again was perform factory reset and then had to set up the network and ftp settings again.
2) Whenever the icetv is enabled and I go to guide, it sometimes freezes and will not exit out. Even the scrolling display on the front of the unit stops scrolling. I have to power down via the remote and reboot.
I am having the exact same issues. The guide disappeared, I did a factory reset today and entered all the data for my IceTV account and am still waiting for a guide despite the fact that there have been three fetches since then. I have no timers now and no guide at all. What do we do now?
hallycat : Sounds like you have a similar issue to me, all of a sudden it stopped working, its been working fine for months up until this weekend.
I've posted a topic in the general section, hoping someone can shed some light on it.
Mine has also stopped working over the weekend
We have performed some tests on the firmware and loading the guide and it appears that the Topfield have a fixed length for descriptions of 1024 bytes. There is a description longer than that in the guide at the moment.
We have artificially limited the description field for the Topfield now to 1024 bytes and we are currently testing this on the currently released firmwares to confirm that this is working for all firmware versions.
This has been tested on the currently released firmwares and has fixed the issue.
NOT FIXED AT THIS END.
been having issues all weekend , talked to tech support and they said to restore to factory defaults and resetup , did that and lost all channels as well as interactive , then told to download a new version , 3 hrs later I now have no guide or tv channels.
Eventually after going back to ver 29 I got the tv channels working but no guide or interactive.
ICETV - bah this is not a system that should have been released commercially , the worst thing is I bought the 7100 from ICE thinking wrongly that it was a system that worked.
would I buy a 7100 again NO way , will I resign for IceTV again -NO way in its present form.
There also seems to be huge issues with the icetv website , the topfield alwasy says the server is busy and when on the web using interactive 90% of the time it gets a lserver timeout problem and you have to make 5 or 6 attempts to set a program to record
I am having same, similar problems. Went to iTopfield forum site. Dont bother, it is under construction.
This machine would have to be the most frustrating experience I have ever had. Setting up my PS3 was sooo easy. I cant believe that these people have made setting up so difficult. I should have bought the TiVo instead.
Quote from: Blathuder on March 11, 2009, 08:23:36 PM
I am having same, similar problems. Went to iTopfield forum site. Dont bother, it is under construction.
....
The Topfield website default page is stuffed. Try http://forum.itopfield.com.au/default.aspx and you'll get to the forum.
Can I also say I had the "No channel map" error on Saturday morning. I left the Topfield on for just over 1 hour. I checked the My Account page on the ICETV website to make sure it had re-grabbed the EPG after an hour (which it did) and all is now fine.
Quote from: delco on March 09, 2009, 05:31:02 PM
NOT FIXED AT THIS END.
It's all fixed here using 1.00.45beta without the need for a factory reset
Although I had mine on FTA TV and gave it a few days before I switched back to Ice after the fix was announced.
Quote from: Vortical on March 17, 2009, 12:53:06 PM
Quote from: delco on March 09, 2009, 05:31:02 PM
NOT FIXED AT THIS END.
It's all fixed here using 1.00.45beta without the need for a factory reset
Although I had mine on FTA TV and gave it a few days before I switched back to Ice after the fix was announced.
Loosely classed as 'fixed' don't you think? Considering the firmware and IceTV are not Beta or RC you would expect the EPG to work straight away not in a few days?
My PVR has been running since the weekend and still says the server is busy.
The only reason I left it a few days as I wanted to test the FTA EPG for a bit.
Not because I needed to.
It should definately be fixed for 1.00.45beta as I had been using it for a few days already before my post without any problems at all.
Where do you get beta firmware from?
From here http://forum.itopfield.com.au/Topic14635-55-1.aspx
But read the first post before downloading
Cool - will take a look tonight - thanks for your help.