IceTV Forum

IceTV Guide for IceTV enabled PVRs => Topfield => Topic started by: gerke on April 25, 2009, 12:19:42 AM

Title: Interactive not sending recording schedules
Post by: gerke on April 25, 2009, 12:19:42 AM
Hi guys,

I bought a 7100 yesterday and I think I have set it up correctly, but I wanted to check incase I'm missing something. This is my first PVR.

I have the IceTV EPG working (after a firmware upgrade to the latest version), and it is great. I can set up programs to record from the EPG, but when I try to schedule them in Interactive, they don't appear on the PVR.
I have tried waiting several hours, in case it was a time thing, but that hasn't done anything.

I also have the iPhone app, it seems to work to send to the Interactive website, but the website never passes the info onto my PVR, thus never recording anything.

The device is setup under the 'My Account' section, and I have tried the 'Resend all recordings' link with no luck.

Any help or advice would be great.
Title: Re: Interactive not sending recording schedules
Post by: wally3218 on April 25, 2009, 08:34:50 AM
Have you tried pinging IceTV and does your Device Type come up in your TF7100 EPG settings this will indicate it can connect to there servers over the internet.
You could also look at the suggestions in http://forum.itopfield.com.au/Forum58-1.aspx
Once everything is set up correctly you will be ok.
Title: Re: Interactive not sending recording schedules
Post by: gerke on April 25, 2009, 03:35:43 PM
The ping test comes back sucessful. The device appears correctly and passes the IceLink ping as well.

I managed to get it to record one show over interactive, but now the guide is incomplete\missing completly...
Has shows for next week on some channels, but looks like it is very unstable.

eg. the next show in the program for OneHD is the cricket showing on the 1st of May... nothing till then and then it is blank afterwards as well.

I have gone through all the menus and cannot find anything to force a download of the quide, and its starting to really annoy me.
I am in the trial period for IceTV, but if I can't get it working by then, I'll have to go without.
Title: Re: Interactive not sending recording schedules
Post by: wally3218 on April 25, 2009, 06:12:15 PM
I have the full IceTV guide on all channels, I don't think there is anyway to force the TF7100 to download the  IceTV guide. Try in systems settings, EPG Setting ,EPG Type to AIR and recieve the guide and then reset it to IceTV and see how that goes.
Title: Re: Interactive not sending recording schedules
Post by: AMLagonda on April 27, 2009, 03:04:56 AM
I havent seen a way to force a EPG download and that sucks as some times its just not there.
Title: Re: Interactive not sending recording schedules
Post by: grc on August 20, 2009, 07:25:24 PM
I'm having exactly the same issue as the original poster. Difference for me is that I've had it working fine for 6 months but now all of a sudden it's not. Just like the OP, my recording prefs show up on icetv interactive and the iPhone app, but they don't get to the PVR. My icetv username and password are there in the 7100 and the icetv EPG shows up fine. Just no recording prefs from icetv interactive.

Been trying to figure out why it's not working for a week now.

Ideas?
Title: Re: Interactive not sending recording schedules
Post by: tonymy01 on August 20, 2009, 07:52:15 PM
Have you double checked your mapping anyway?  Do you have duplicate channels in your PVR?   How did you deal with the new "Go" introduction, did you rescan?  This will no doubt have given you duplicate channels as most PVRs didn't really work so well to detect all the hokey pokey that Nein did to the transport stream.    You will have to delete all the duplicates to get it back working correctly.
Title: Re: Interactive not sending recording schedules
Post by: grc on August 20, 2009, 07:56:21 PM
I did a factory reset so there were no channels in there. Then I rescanned, added the ice tv details again which seemed to be accepted fine, and now I have the ice EPG working great, but no interactive prefs get sent to the 7100.
Title: Re: Interactive not sending recording schedules
Post by: wayne05 on September 03, 2009, 09:55:06 PM
It would be really nice if any one can come up with a solution to the above problems. I also have had the EPG working for some months now but in the past few weeks the recording scheduling doesn't seem to be read by the pvr. Reformatted HDD factory reset and re scanned channels etc to no avail!! Can send data via filezilla ICE works on the Toppy but info wont send from PC just shows queued.
Title: Re: Interactive not sending recording schedules
Post by: gib802 on September 04, 2009, 08:37:07 PM
This service is a crock.  Was working fine for weeks now it only gives Channel 10 EPG up until midday then just blank.
Nothing suggested seems to fix it.
It sucks having to use the free to air EPG again just to guarentee your shows get recorded.  
Makes you wonder what the point of paying for a premium EPG is if it cant be trusted to work.
Title: Re: Interactive not sending recording schedules
Post by: tonymy01 on September 04, 2009, 09:48:44 PM
Yeah, the Topfield 7x00 is a piece of crock, that is for sure.
Title: Re: Interactive not sending recording schedules
Post by: billlee on October 18, 2009, 10:14:33 AM
Just another data point: I set up my Topfield a few weeks ago, and though I was getting the guide, it never recorded any of my IceTV set programmes (I have two other EyeTV units that are working fine and were picking up the slack).

Today I sat down and tried to get it working.
1) I checked the Firmware version - it was the latest version.
2) I tried going into the System Setting>EPG Setting:
  - 'Test Connection' worked fine.
  - 'Update device list' does not do anything. No options are offered when the blue button is pressed.
3) Tried resetting the name and password to my IceTV name and password.
4) 'Test Connection' worked fine.
5) 'Update device list' still does not do anything
6) Tried setting the password to a known incorrect password
7) 'Test Connection' fails
8 ) 'Update device list' still fails (as it should)
9) Set the password back to the correct one
10) 'Test Connection' works again
11) 'Update device list' still does not do anything
12) Went to Installation>Network Setting
13) Created a new DHCP profile whereas I used a static IP number before. Activated this new profile. The network information was tested and was correct for this network.
14) Went back to System Setting>Epg Setting
15) 'Test Connection' works (as expected)
16) 'Update device list' now works for the first time
17) I can now select my Topfield7100 from my list of 3 possible recording devices.
18) Waited about half an hour, and then checked the Timer Settings menu, and found that the Topfield was now populated with IceTV-scheduled programmes. Success!

Conclusion: Though my settings for network using Static IP numbers together with DNS server addresses - both taken from the ADSL modem I use - were correct, something subtle did not allow scheduling of programmes. Even though it did allow the TV guide to be downloaded, the scheduling did not work until the setting of network type was changed from static IP to dynamic. Your milage may vary.

Title: Re: Interactive not sending recording schedules
Post by: JPP on October 18, 2009, 11:41:37 AM
This is very interesting. I'm experiencing ICETV problems on my 2400 Toppies. I too have Static IP's. I too did change to Dynamic IPs. Worked for a while, then stopped working reliably too. Have a look at the posts in the 2400 UK Oz Toppies threads (http://forum.toppy.org.uk/forum/viewforum.php?f=21). I wonder if it has to do with Topfields imlpementation of the ICETV FW? My Beyonwiz had a Static IP address as does my ICETV's IceBox 2. Never missed a beat.

My 7100 while I had it for about 3 months also never missed a beat on a Static IP Address. So does this now point the finger at ICTV? The problem has come about at or shortly after ICETV upgraded the WEB Software to the current version. Unfortunately, that also coincided to some degree with my purchase of the 2400 and sale of the 7100 and Wiz, so I can't go back now to compare wrt Static vs Dynamic IP addressing on these 2 PVRs.

What is also very interesting is that like you, I get the EPG OK most times - it's the timers that don't get through.
Title: Re: Interactive not sending recording schedules
Post by: tonymy01 on October 18, 2009, 12:16:17 PM
Sorry, but how has your IP address configuration got anything to do with ICE?   If you setup the correct IP address, mask, gateway and DNS (and they all MUST be correct) then your Toppy is free to get out to the net to seek the ICE server.  If your toppy can't do that, then you are pointing your finger in the wrong direction.
Title: Re: Interactive not sending recording schedules
Post by: JPP on October 18, 2009, 12:22:06 PM
Quote from: tonymy01 on October 18, 2009, 12:16:17 PM
Sorry, but how has your IP address configuration got anything to do with ICE?   If you setup the correct IP address, mask, gateway and DNS (and they all MUST be correct) then your Toppy is free to get out to the net to seek the ICE server.  If your toppy can't do that, then you are pointing your finger in the wrong direction.
Like the OP said a couple of posts up Tony, why is it so???. when all logic dictates that it shouldn't make one iota of difference. Interestingly, it was ICETV who also recommended that I test this - change Static to Dynamic IP address. A bit of a head scrather ain't it?

EDIT.
I have sent an email to Daniel of ICETV, pointing to this thread. I think we are beginning to see a common thread between the 7100 and new 2400. Hopefully this will help us get to the bottom of this issue a little faster. It's damm annoying! I have also checked with another 2400 user who lives in Perth and is using Static IP addressing. He's not having any timer updating issues. Is it perhaps a Sydney/NSW issue and then only with Topfield machines? Where do you guys all live?
Title: Re: Interactive not sending recording schedules
Post by: pinarello65 on October 26, 2009, 09:14:19 AM
In trying to resolve my other problem where it was recording the wrong ONE-HD channel (CH12 one digital rather than CH1 One-HD) I now seem to have this problem. Did a complete factory reset.  Set up the network, rescanned channels - noticed a fresh rescan of channels gave me duplicated CH1, CH10, Ch11, Ch12 (all the 'One' channels) so deleted the 2nd instance of each of those,  left the EPG to AIR and powered off.  Restarted. Set the EPG to ICE-TV, enter the username/password, ping test = OK,  get tokens succeeded.  Thought I was finally in business.  Looked at the LCN Settings which was entirely blank whereas previously it listed a number of channels.  Looked at the GUIDE, it gave me an error about not being able to do something (I forget..LCN?) and try again in 2 minutes.  Had this same error every time I tried for the next hour. Turned it off.  Tried it the next day, the GUIDE was working, but no timers are set.

After a couple more days, still no timers being set.  EPG ping test now says FAILED most of the time, get tokens lost my 'Toppy' token and it now says NONE.  Double checked username/password, network settings, everything seems fine. 

I have another token in my setup, 'iMac' which is for the Elgato EyeTV on my iMac and that is working perfectly using the same username/password as I have set on the Toppy. 
Title: Re: Interactive not sending recording schedules
Post by: pinarello65 on October 27, 2009, 09:40:14 PM
Mine has started working again AND recording the right ONE-HD channel which was the other problem I had.   Hopefully fewer troubles for me now.  And basically I've done nothing, it just started to work.
Title: Re: Interactive not sending recording schedules
Post by: pinarello65 on October 29, 2009, 04:04:49 PM
And it stops working again, with me changing nothing.  It seems like there's nothing you can do about it.
All the while my iMac & Elgato EyeTV work perfectly with ICE-TV, regardless of whether the Toppy is working or not.
Title: Re: Interactive not sending recording schedules
Post by: senator02 on October 29, 2009, 06:48:01 PM
I live in Perth, I have had my 7100 for 5 months. I got around to connecting to ICETV about 4 weeks ago. I can see the EPG, but it will not download the scheduled programs. I running of my wireless network of a Belkin router conected to a Belkin ADSL modem runing at speads of 108mb, all connections are good. Still no luck. Any surgestions would be helpful
Title: Re: Interactive not sending recording schedules
Post by: JPP on October 29, 2009, 09:26:42 PM
Quote from: senator02 on October 29, 2009, 06:48:01 PM
I live in Perth, I have had my 7100 for 5 months. I got around to connecting to ICETV about 4 weeks ago. I can see the EPG, but it will not download the scheduled programs. I running of my wireless network of a Belkin router conected to a Belkin ADSL modem runing at speads of 108mb, all connections are good. Still no luck. Any surgestions would be helpful
I think you may have read my posts regarding this intermittant behaviour with my TRF-2400 PVRs as well. Like the posters above, the EPG always or at least most times seems to get through - the line below the My Account Line at the top of the My Account page shows when your last EPG fetch was done.

I'm still trying to ascertain if it's a Toppy thing or somehow connected to ICETV's interaction with the Toppy's request for a Timers update. Like others, ICETV is working normally on my other ICETV device. Is it somehow dependant on the Router Modem? Not everyone is expericing the problem, so there's something at play that is equipment specific. I have a Dynalink ADSL 2 Router Modem and am using the IceBox2 as my hub at the PVR end of my network to connect the PVRs to the network (two 2400 Toppies and one SD MP via the IceBox2 USB interface).

What is so odd about this behaviour though, is that in my case at least, it all worked with the same equipment with my Beyonwiz for a couple of years and still does with my IceBox2. So, that suggest that something has changed at the ICETV end. But what? Most people aren't having any problems, so whatever has changed, it is pretty subtle.
Title: Re: Interactive not sending recording schedules
Post by: pinarello65 on October 29, 2009, 10:44:06 PM
Mine worked perfectly with ICE-TV since I bought it over a year ago. It's just started playing up recently in the last couple of weeks when I tried to resolve a problem where it was recording ONE-HD on the wrong channel.  At the moment, my guide data is populated from 25/10 to 31/10 (As I type is 29/10).  If I hit the red button from the EPG settings page, at the moment it says SUCCESS, but nothing changes in the GUIDE or timer settings.  I'll have to wait & see what happens when the date moves past the last day of EPG data I've got. Maybe I need to format the hard disk (which would wipe the EPG data sitting there?), then presumably that would make it do a fresh fetch of 7 days EPG?

My set up is a little complicated, I have a gigabit network switch that everything plugs into via CAT6 network cable, PC, iMac, Toppy, Playstation3 and then a connection from the switch goes to a Draytek Vigor 2700VG modem/router.  A laptop & iPhone connect to the router wirelessly.  ICE-TV is set up with 3 tokens, for Toppy, PC (Win7 media centre with single tuner HD TV tuner card) and iMac (Elgato EyeTV, dual HD tuner).  So I have 3 devices collecting EPG data via my ICE-TV account.

Win7 & iMac both currently have the next 7 days EPG data & correctly set timers. The Toppy is the only one not doing it right. Ordinarily the iMac & Win7 dont get called upon to record very much because its only going to be when there's 3 or more things on at once & that doesnt happen very often. What I've had to do now is move all my regular shows to record on the iMac which does a pretty good job of turning itself on, recording the show & making it available to watch on the big TV via the playstation3, because what I can do is stream the recording from the iMac to the PS3 via a media server running on the iMac.

So it's a bit rubbish really...
Title: Re: Interactive not sending recording schedules
Post by: Kaff on November 16, 2009, 05:32:53 PM
If your Topfield - IceTV link has been setup and working correctly for some time, then just stops working, I suspect this could be due to the IceTv server being busy.

Last Friday night I could not get the guide, or any timers to download from IceTV.  On the Topfield I went into System Setting >> EPG Setting >> and pressed the red button on the remote to do a connection test, I got messages stating the test was successful.  But still no guide download.

When you do a successful connection test there is a dialogbox that pops up for a split second at the end.  Normally this states:
EPG: 60 minutes
Scheduler: 30 minutes.

I'm guessing this tells the Topfield how often to download the guide/times.

On Friday it stated:
EPG: 0 minutes
Scheduler: 0 minutes.

I suspect this is IceTV telling the Topfield its busy, and won't do a dowload?  I say I believe it is IceTv, not the Topfield, becuase it is IceTV that tells the Topfield how often to do a download.  Below text copied from IceTv webite "Most devices that support IceTV Interactive get their update timing from the IceTV server, which is about 30 minutes unless the IceTV server is under heavy load"


After a while the problem resolved itself, my guide and timers were downloaded to the Topfield, and the dialogbox went back to stating
EPG: 60 minutes
Scheduler: 30 minutes.
Title: Re: Interactive not sending recording schedules
Post by: dalboz on November 20, 2009, 06:40:40 PM
I've just set up IceTV on my 7100. Not exactly filled with confidence after reading a few threads :-) But will see how it goes. As for the IceTV server issues, it makes me wonder about how the updates are scheduled.

IceTV *should* program each device to update at a random interval. If every toppy updates exactly on the hour or half-hour then the IceTV server will experience the equivalent of a DDoS attack when all toppies in the country try to update at once. The randomizing technique is used by Symantec Antivirus for similar reasons.
Title: Re: Interactive not sending recording schedules
Post by: prl on November 20, 2009, 10:35:50 PM
It's the device startup time that does the randomisation.
Title: Re: Interactive not sending recording schedules
Post by: dalboz on November 20, 2009, 10:48:12 PM
Quote from: prl on November 20, 2009, 10:35:50 PM
It's the device startup time that does the randomisation.

You're assuming that this is in fact random. What about when people set the device to wake up at a preset time every day, as mentioned in the FAQ (http://www.icetv.com.au/cgi-bin/websupport.cgi?op=show_faq&faq_id=147&faq_cat_id=27) (I know mine is set at 10am). Or if the wake up happens due to a timer it's most likely to be on the hour/half hour or a couple of mins before.

Would be interesting to see some stats from their query logs ;-) Given the reputation for unreliability, I have half a mind to set up a script to request the guide every X mins and graph the results to see if there are any patterns. Also there is no chance of a DDoS-style issue unless we have a critical mass of devices out in the marketplace. Is that info available anywhere?
Title: Re: Interactive not sending recording schedules
Post by: tonymy01 on November 21, 2009, 11:42:24 AM
What about other times in the day when the PVR fires up for a timer?   Mine is set to wake at 4am (least chance of disturbing a real timer at that time) and then whenever it has to wakeup for a timer.   So unless ICE pushes something *very* last minute thru, what you miss in the morning daily timer (10am for you) you will get later anyway, and will only be of consequence for timers the new timers for shows >5days out (ICE sets timers for up to 5days ahead).