Beyonwiz has lost most of the EPG

Started by dixoni@exemail.com.au, January 27, 2026, 04:22:37 PM

Previous topic - Next topic

dixoni@exemail.com.au

SBS channels still appear, and so do win10.
I have refreshed the password, which gets lost every week.
I have disabled and reenabled the ice tv app.
It's a beyonwiz v2. I have turned it off, waited a minute or so, rebooted. No joy.
Other devices still have a full guide.

In BW settings, does it matter that I don't understand EIT or AIT.
Any suggestions, other than forgo the BW interface and (sigh) adapt to icebox?

prl

#1
Quote from: dixoni@exemail.com.au on January 27, 2026, 04:22:37 PMIt's a beyonwiz v2. I have turned it off, waited a minute or so, rebooted.

A less disruptive way to clear the IceTV data and force a reload is to use MENU>IceTV to Disable IceTV, re-Enable IceTV and then do a Fetch EPG and update timers now. Doing the disable/enable will clear the EPG and force the IceTV to fetch the whole EPG and all times, not just changes since the last update (which normal automatic fetches and "Fetch EPG and update timers now" usually do).

If you choose to update the EPG by restarting, you don't have to wait. Doing any of Shutdown, then an immediate reboot, Reboot or Restart GUI will do (and of those, Restart GUI is the quickest).

Quote from: dixoni@exemail.com.au on January 27, 2026, 04:22:37 PMIn BW settings, does it matter that I don't understand EIT or AIT.

The EIT is the broadcast Event Information Table. IceTV sends its EPG in a different form and the IceTV plugin converts it into the EIT-based form that is used internally. The broadcast EIT is used for the Beyonwiz EPG when IceTV is disabled. The AIT is the Application Information Table, and it's not used by the Beyonwiz EPG. In the language of the standards, an "event" is any particular showing of a program on a specific channel.

In the EPG settings, for the settings that mention the EIT of AIT. the defaults should work just fine. Though it's not related to either the EIT oor AIT settings, don't enable "EPG cache reload". It will mess up your EPG.

Quote from: dixoni@exemail.com.au on January 27, 2026, 04:22:37 PMI have refreshed the password, which gets lost every week.

The typed-in password isn't stored on the Beyonwiz. When the Beyonwiz authenticates using the password, IceTV returns an access token that is used for any future access. I've never had any problems with that being retained. Maybe IceTV can provide some suggestions.

Quote from: dixoni@exemail.com.au on January 27, 2026, 04:22:37 PMSBS channels still appear, and so do win10.

If you use a Favourites list, try switching temporarily to the builtin Terrestrial TV LCN favourites list. You can do this from Live TV my pressing EPG, then using PREV/NEXT to switch between the favourites lists. The favourites list name appears just above the top left of the EPG grid. Do you see more EPG listed, then there may be a mismatch between the channels that you've selected to be in your Favourites list and the channel data that's been configured to be sent by IceTV.

If you press EXIT to leave the EPG, then any change to the Favourites list will be cancelled.

PS: This section of the forum is about IceTV's own IceBox PVR, not Beyonwizes. There is a section further down the forum main page for Beyonwiz. It's not an issue for me, but you might get more interested readers if you post in the Beyonwiz section.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

dixoni@exemail.com.au


dixoni@exemail.com.au

Progress report, i disabled the ice tv plugin, and managed to repopulate the plain old beyonwiz epg by stepping though each channel....
Now ive gone back to the wiz menu and reeanabled ice tv,  i'll see how this goes.
Duh, i think i saw a suggestion somewhere back to disable ice tv. But to be clear, i wasnt enought to disable and immediately re enable. I had to view each channel in turn, not its epg, but the channel video  and as i did so, the channel info reloaded an appeared.

prl

Quote from: dixoni@exemail.com.au on February 03, 2026, 08:10:17 PMDuh, i think i saw a suggestion somewhere back to disable ice tv. But to be clear, i wasnt enought to disable and immediately re enable. I had to view each channel in turn, not its epg, but the channel video  and as i did so, the channel info reloaded an appeared.

By itself, siabling (then re-enabling) IceTV clears the EPG, but it doesn't, by itself, refill the whole EPG immediately. If you just disable it, it will only automatically refill the broadcast EPG for the broadcaster that's currently showing in live TV. You need to view a channel from each broadcaster for a short time to completely fill the EPG. That's because broadcasters only send out their own EPG on channels that they broadcast. You don't need to visit all channels to completely fill the broadcast EPG.

If you disable IceTV and re-enable it, that will clear the EPG (twice), but the EPG won't fill until you wait for the next tome the PVR contacts IceTV, or you do (as I suggested in my previous post) MENU>IceTV>Fetch EPG and update timers now, which will do an immediate update.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

dixoni@exemail.com.au

Thank you.
Also i have learned that the settings in my icetv.com.au where channels are selected individually as all or disabled, affects the epg fetch.

prl

Quote from: dixoni@exemail.com.au on February 10, 2026, 10:08:23 AMAlso i have learned that the settings in my icetv.com.au where channels are selected individually as all or disabled, affects the epg fetch.

Yes, that would definitely do it. It can be caused if you do a scan and the scan doesn't catch some broadcasters.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing