Main Menu

Missing Timers

Started by srto2, June 07, 2024, 10:49:55 AM

Previous topic - Next topic

srto2

I'm a bit vague regarding when this issue started because these missing timers are of repeats, so I'm not overly fussed - but possibly since the recent minor update.

That said, from at least 3 June my main BYOB Icebox refuses to accept "QI" and "8 out of 10 Cats" on ABC HD / ABC Entertains and SBS Viceland HD respectively.  I fired up my spare Icebox and set the timers for that too, with the same result.  Both machines are running 11.6.2 with the latest patch.

A check of TVheadend confirms that QI and 8/10 Cats aren't set to be recorded on either machine.

So far as I've checked, all other timers are present and correct.

'My Week" shows the timers are present and correct but they don't appear on either machine.

Why is it so??  Maybe the way the system is handling repeats?

raymondjpg

Quote from: srto2 on June 07, 2024, 10:49:55 AMI'm a bit vague regarding when this issue started because these missing timers are of repeats, so I'm not overly fussed - but possibly since the recent minor update....

...Why is it so??  Maybe the way the system is handling repeats?
I think you'll find it's because the missing timers are for programs that are missing from the EPG.

This was the issue that was addressed by the "recent minor update".

At first I was encouraged to see that the update had apparently fixed the issue on my BYO, at least for the five primary SD channels in my area. However this morning I noticed gaps in channel 10 and SBS Food. A reboot fixed the issue with channel 10 but not SBS Food. A second reboot fixed the issue with SBS Food.

So it appears that, while the issue may have been at least partially resolved with the update, it my re-occur, and apparently randomly, in the EPG.

I don't see a need for users to reboot to fill gaps as a long term solution for this issue.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

srto2

Quote from: raymondjpg on June 07, 2024, 11:22:04 AM
Quote from: srto2 on June 07, 2024, 10:49:55 AMI'm a bit vague regarding when this issue started because these missing timers are of repeats, so I'm not overly fussed - but possibly since the recent minor update....

...Why is it so??  Maybe the way the system is handling repeats?
I think you'll find it's because the missing timers are for programs that are missing from the EPG.

This was the issue that was addressed by the "recent minor update".

At first I was encouraged to see that the update had apparently fixed the issue on my BYO, at least for the five primary SD channels in my area. However this morning I noticed gaps in channel 10 and SBS Food. A reboot fixed the issue with channel 10 but not SBS Food. A second reboot fixed the issue with SBS Food.

So it appears that, while the issue may have been at least partially resolved with the update, it my re-occur, and apparently randomly, in the EPG.

I don't see a need for users to reboot to fill gaps as a long term solution for this issue.
Thanks for that.  But in my case the shows are in the Icebox EPG.  I had to check (!) because I mostly tend to peruse the Ice EPG on my phone or PC rather than on screen.  I have rebooted both boxes several times but timers are still missing.

It looks like the latest bug fix has introduced more bugs?

raymondjpg

Quote from: srto2 on June 07, 2024, 11:59:57 AMIt looks like the latest bug fix has introduced more bugs?
Possibly, but as BYO operators we have been discouraged from lodging support tickets, so have to rely on what can be gleaned from forum posts.

So far this issue hasn't been commented on recently by IceBox owners.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

raymondjpg

Quote from: srto2 on June 07, 2024, 11:59:57 AMI have rebooted both boxes several times but timers are still missing.
Another thought. If the issue initially was due to gaps in the EPG, maybe that was fixed by the reboots, and maybe if you resend all recordings to your BYO from My recorders page, they will show up.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

srto2

Quote from: raymondjpg on June 07, 2024, 12:28:20 PM
Quote from: srto2 on June 07, 2024, 11:59:57 AMI have rebooted both boxes several times but timers are still missing.
Another thought. If the issue initially was due to gaps in the EPG, maybe that was fixed by the reboots, and maybe if you resend all recordings to your BYO from My recorders page, they will show up.

Been there, done that too.  No change.  In my case it only seems to be repeat programs that are affected.  Could you be so kind as to try that?  Assuming you haven't already of course...  I even started with no timers at all set on the spare box and got the same result.  Non repeat timers are OK.

This is a frustrating kind of issue but, as I said, I can't be too fussed about it.  I'll set the timers manually on the spare box to see if that works but other than that I'm out of ideas.

There is always iView and SBS on Demand etc if necessary... 

raymondjpg

Quote from: srto2 on June 07, 2024, 02:12:19 PMIn my case it only seems to be repeat programs that are affected.
Have you perchance enabled add a repeat (R) flag to the title on the My Recorders page? That has long been known to interfere with timer creation in IceBox.

If you have, try disabling that, saving, then re-sending all recordings.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

srto2

Quote from: raymondjpg on June 07, 2024, 02:50:45 PM
Quote from: srto2 on June 07, 2024, 02:12:19 PMIn my case it only seems to be repeat programs that are affected.
Have you perchance enabled add a repeat (R) flag to the title on the My Recorders page? That has long been known to interfere with timer creation in IceBox.

If you have, try disabling that, saving, then re-sending all recordings.

Many, many thanks!  Yes I had...  Relatively recently too, I think.  I disabled it for both machines and rebooted.  And the timers have now popped up as they should.  All OK now.

With the state of the world lately, I wish I didn't feel the need to worry about these first world problems...

IanL-S

Glad that is sorted - the repeat tag must not be included in the title but is OK in the subtitle or description; I include it at the end of the subtitle.

The support policy for BYOB units is the same as that for IceBox purchased from IceTV except for hardware related issues. Sometimes it is not clear what is or is not a hardware related issue.

Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

raymondjpg

Quote from: srto2 on June 07, 2024, 03:44:24 PMWith the state of the world lately, I wish I didn't feel the need to worry about these first world problems...
I'm not certain, but I think a repeat flag anywhere but in the Title is OK for IceBox. Personally I would only enable it if I could readily see it in the EPG grid, and anywhere but in the title doesn't work for me. I doubt if it's high on the list for IceTV to fix, but I would like to see that done.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

raymondjpg

#10
Quote from: IanL-S on June 07, 2024, 03:53:05 PMThe support policy for BYOB units is the same as that for IceBox purchased from IceTV except for hardware related issues. Sometimes it is not clear what is or is not a hardware related issue.
I don't think that recurring gaps in the IceBox EPG is a hardware issue, and I'm not convinced that is completely resolved yet. Maybe my experience is anomalous.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

IanL-S

It id definitely a software/firmware issue as it also happens with IceTV IceBox.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

raymondjpg

Quote from: raymondjpg on June 07, 2024, 04:11:53 PM
Quote from: IanL-S on June 07, 2024, 03:53:05 PMThe support policy for BYOB units is the same as that for IceBox purchased from IceTV except for hardware related issues. Sometimes it is not clear what is or is not a hardware related issue.
I don't think that recurring gaps in the IceBox EPG is a hardware issue, and I'm not convinced that is completely resolved yet. Maybe my experience is anomalous.
Lately I have observed quite substantial gaps again in my BYO IceBox. This morning I resolved this through a reboot.

As I observed before, I don't consider the need to reboot IceBox periodically as a long term solution to this problem.

Is anyone else seeing this?


Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

IanL-S

I do not recall seeing anything like this recently, but I only check the EPG occasionally. I do most of my interaction via IceTV Windows app or TVHeadend web server.

There have been no gaps where I have scheduled timers, as I would get an email advising of a problem.

The good news is that it is definitely unrelated to your using a BYOB IceBox. I cannot think of any hardware issue that would result in EPG gaps.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

raymondjpg

Quote from: IanL-S on July 18, 2024, 05:23:21 PMI do not recall seeing anything like this recently, but I only check the EPG occasionally. I do most of my interaction via IceTV Windows app or TVHeadend web server.

There have been no gaps where I have scheduled timers, as I would get an email advising of a problem.

The good news is that it is definitely unrelated to your using a BYOB IceBox. I cannot think of any hardware issue that would result in EPG gaps.
Thanks for that advice.

From what I can tell I haven't had any failed timers as a result of this either, but most of my timers currently are with ABC and SBS and the gaps have appeared to be largely with channel 7, as they have been previously in my BYO IceBox.

I'll keep an eye on it and if gaps open up again I'll lodge a support ticket. I suspect the IceTV people consider this issue to have been resolved already.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD