Main Menu

Firmware Update

Started by AJFC, May 26, 2023, 10:39:27 AM

Previous topic - Next topic

AJFC

I have received the email on the firmware update which gives instructions for the PC or Mac.  My Ice Box is connected to my TV so how do I install this update?

DeltaMikeCharlie

You could try to copy via a USB flash drive.  However, the file needs to go into '/storage/.update' and in Linux files/directories starting with '.' are hidden by default so you can't see them from the Kodi file manager without some extra steps.

Try: Settings -> Media -> General -> Show hidden files and directories.

Then: Settings -> File manager -> Add source -> Browse -> Home folder -> .update -> OK -> OK.

Now in the file manager, navigate to '.update' on one side and then your USB Drive on the other.

Select the file, open the context menu (the button under mute on the ICE RCU), select 'Copy' and then confirm.

To be on the safe side, I'd undo the 'Show hidden files' step once the file manager source has been created.

NOTE: I have not tested this to see if the IceBox will actually perform the update from here.

Ian_AW

Quote from: AJFC on May 26, 2023, 10:39:27 AMI have received the email on the firmware update which gives instructions for the PC or Mac.  My Ice Box is connected to my TV so how do I install this update?
You need to get the update package to the Update folder on the IceBox.

Once it is there, you simply reboot the IceBox and it will go from there.

Do you subscribe to the IceTV EPG?

How do you connect the IceBox to the Internet?

IanL-S

Assuming the IceBox is attached to the internet and you have either a MAC or PC the instruction in the email has the procedure to be adopted. I have never tried the suggestion by Delta Mike Charlie but it should work.

Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

AJFC

Thanks, I will try DMC suggestion but I note that there is an "Automatic updates ON" so why is it not automatic?

AJFC

Hi, I got as far as entering the IP address but this came up:
Ice Tv Update.jpg

Ian_AW

Quote from: AJFC on May 26, 2023, 02:15:11 PMHi, I got as far as entering the IP address but this came up:

You do not need the \\IP_ADDRESS bit,just \\192.168.0.200

IanL-S

#7
Quote from: AJFC on May 26, 2023, 01:42:47 PMThanks, I will try DMC suggestion but I note that there is an "Automatic updates ON" so why is it not automatic?

Go question about "Automatic updates ON", which specifically refers to OS Updates, not ad-on updates. It may be limited to update files found in the \.update\ folder. The IceTV implementation of LibreELEC does not, as far as I am aware, automatically download updates to the OS from the IceTV server.

Update Did a quick search and found two things, first that that setting (at least in 2022) was not working as expected, and second it is designed for a standard LibreELEC installation rather than a custom one such as that used by the IceBox. I suspect it has been deliberately disabled.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

AJFC

IMG_2023-5-26-190233.jpegIMG_2023-5-26-190134.jpeg 

Daniel Hall at IceTV

As for automatic updates, this will be enabled in the future, however it didn't make it into this firmware release, we hope to have it available for the next release, so that the next one will be the last update that is required to be done manually.
Regards,

Daniel.
CTO.

AJFC

My text went missing.  I had gone a little further but when I accessed the context menu there was no "copy" function.

DeltaMikeCharlie

Quote from: Daniel Hall at IceTV on May 26, 2023, 08:27:17 PMAs for automatic updates, this will be enabled in the future, however it didn't make it into this firmware release, we hope to have it available for the next release, so that the next one will be the last update that is required to be done manually.
Thanks Daniel,

I'd like to suggest that:

A) There is a setting to enable/disable automatic downloads.
B) Think about time-of-day.  Perhaps download overnight.  Ask the user.
C) Think about users with slow/capped NBN plans.
D) Think about interrupted downloads and recovery.  Perhaps download in chunks and then assemble?
E) The user must actively initiate/approve the upgrade.  It should not be silent and a surprise.
F) Think about the ability to rollback.
G) Think about the ability to upgrade from USB flash drive.

DeltaMikeCharlie

Quote from: AJFC on May 26, 2023, 08:30:34 PMMy text went missing.  I had gone a little further but when I accessed the context menu there was no "copy" function.
On the right side, move onto '.update' and press OK.
On the left side, move onto firmware file and try the context menu.

DeltaMikeCharlie

@AJFC

Quote from: Ian_AW on May 26, 2023, 02:37:48 PMYou do not need the \\IP_ADDRESS bit,just \\192.168.0.200

As @Ian_AW said, you were almost there...

From Windows Explorer, you can browse to \\192.168.0.200 and you should get in (provided that your IP address has not changed).

IanL-S

Getting close ...

There are many ways of getting the firmware onto the IceBox. I use SFTP as my IceBoxes are set up for SFTP. But the method suggested by Delta Mike Charlie will work.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help