Main Menu

Channel numbers

Started by Ian_AW, May 22, 2023, 02:17:09 PM

Previous topic - Next topic

Ian_AW

G'day,

I had to do a soft reset to try and address an issue with the EPG, only now I have lost the channel numbers.

Before this reset, 10 HD was 10, 10 Peach was 11, ABC HD was 20, SBS HD was 30... you get the idea.

Now 10 Peach is 1, 10 HD is 4, ABC HD is 5, SBS HD is 9...

The broadcasters are grouped together, but the number matching the channel number has been lost.

Before the soft reset, I did not have to do anything to get the cumber to match the channel number. What has happened?

Is there anything that can be done through TVHeadEnd?

vader1111

#1
Yes, you can fix these via the TVHeadEnd web interface.  You can access it by entering this address in a web browser, on your home network:
http://<icebox ip address>:9981/extjs.html#
Obviously the IP address depends on what is assigned by your router, so you'll need to fill in the blank there.

Go to Configuration -> Channel/EPG -> Channels.
To enter a new channel number, you need to double-click in the relevant grid box and type it in manually.
Make sure you hit the Save button, as changes are not saved by default.

I do this as one of my standard steps, every time I do a Hard or Soft Reset.

IanL-S

Yes, this happens from time to time. I have given up worrying about it. The IceTV setup wizard attempts to assign the appropriate LCN number but it seems less than perfect when a soft reset is done.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

DeltaMikeCharlie

Try going into the Kodi configuration menu.  Select: PVR & Live TV | General | Use channel numbers from backend.  This will use the channel number, normally the LCN from the broadcaster, rather than the Kodi sequence number.

Ian_AW

Thanks for the suggestions. Somehow I managed to get the preferred numbering.