Main Menu

Arrgh... Another reinstall

Started by Hati, May 01, 2023, 09:44:03 PM

Previous topic - Next topic

Hati

I didn't put this in the "Help" section as I started a ticket for it, more an FYI and maybe a trigger for an idea how to overcome the problem if the support guys don't come up with something.

In the first 3 months and a bit of ownership of the IceBox, the device or more precisely the SSD (or at least part of it) got corrupted for the second time now due to power loss, resulting in a firmware reinstall and subsequent loss of ALL recordings.

The first time we didn't have many recordings so the frustration was very minimal. However this time around there were over 150 Gig's worth so to say the better half was pissed off is a gross understatement. She was talking about sending the IceBox back to IceTV among the expletives that have been used.

The interesting thing is that my impression was that the box meant to start back up after a power outage, but mine did not. Had to turn it on from the switch on the front. Than the firmware reinstall...

Don't know what others experienced, but this corruption induced recording loss is getting a bit frustrating.

IanL-S

If the BIOS is correctly configured the IceBox should restart after a power failure. There is a BIOS setting dealing with what happens when there is a power failure. This only works so long as the BIOS does not also become corrupted (I have had this happen with Topfield and Beyonwiz PVRs).

Things like this can happen with any PVR. I have had it happen with Topfield, IceTV SKIPPA, and Beyonwiz units. If I recall correctly I once had it happen with the IceBox I got from IceTV; has not happened with any BYOB I have used.

In most cases it is possible to recover recordings using a utility that can read disks formatted using Linux, for example ext4 or JFS (used by Topfield). This means you have to remove the SSD. Unfortunately, with IceBox this can be where things get "interesting". My understanding (from IceTV www site) may use an mSATA rather than SATA SSD. The preproduction unit I have has a SATA SSD. You need an adapter to read an mSATA drive on a PC or MAC.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

Hati

Quote from: IanL-S on May 02, 2023, 02:37:30 PMIf the BIOS is correctly configured the IceBox should restart after a power failure.

I didn't change any of the settings, so it should be as sent by ITV. How do you get into the IceBox's BIOS when the machine is running fine? I ended up in BIOS because the SSD got corrupted and had no boot media "usable".

Quote from: IanL-S on May 02, 2023, 02:37:30 PMThings like this can happen with any PVR

Not the loss of all recordings. I am well aware of the ins and outs of electronics. By the way, the response I got on the ticket I logged is that this is a known issues and ITV is working on a fix that will present as a new firmware version.

Quote from: IanL-S on May 02, 2023, 02:37:30 PMIn most cases it is possible to recover recordings using a utility that can read disks formatted using Linux

Technically, yes, this is possible. The average PVR user however will win lotto before they get down and dirty with Linux.


Hati

Interesting discovery just after I wrote the above post. Got a UPS to use with the IceBox, at least for until the new firmware is released. I switched the box off via the power menu and diligently waited to have the LED go off on the front. Once it did I plugged it into the UPS and powered it back on.

Well, the box went straight to BIOS, so I thought here is the chance to check on the power settings. Lo and behold the behaviour on power return was set to off. I do not know why, I know I haven't changed it, built enough PCs to have a good understanding of the settings, but it was off. So now is set to on. I also disabled quiet boot, at least I get a chance to try end get into the BIOS if needed in the future.

When done with the changes, selected "save and restart" and the box rebooted into Kodi correctly. Go figure... For the record I did try the reboot option multiple times before I finally reinstalled the firmware.

I would LOVE to know why this is happening. I thought for a second that I will have to reinstall the firmware again...