Main Menu

Audio delay

Started by Brettm, January 20, 2023, 10:17:27 AM

Previous topic - Next topic

Brettm

Hi, Is anyone else having trouble with the audio being delayed by a few seconds from the picture"

IanL-S

Another user reported the same thing. I do not know if the issue was resolved for that user.

Is it on all LCNs (channels) or just one/some? Is there any difference between HD and SD programs?

Have you tried connecting to the other HDMI port on the IceBox. On me beta testing unit (which has slightly different hardware) I found that HDMI 1 connection was not using hardware decoding (causing all sorts of issues); changing to the other HDMI port solved the problem.

If the sound is going via a soundbar or AV unit, have you tried resynchronising the sound?

Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

Brettm

Seems only to be on recordings. Will try using the other HDMI port

Ian_AW

The only time I experienced this was when I first had the resolution set at 3840 and a refresh rate of 30 Hz. Even then this managed to sync after a few minutes. After setting it back to 1920 and 50 Hz, no more problems.

I believe the wizard suggested this based on what it detected the capabilities of the TV are.

The installation guide now does recommend this, and the other benefit is a much sharper picture.

The HDMI port is the left most one when looking at the back.

vader1111

#4
If people are experiencing large audio delays, where the audio leads the video, then I think I may know the reason - and the fix.

The IceBox isn't powerful enough to upscale from 1080i or 576i (the HD & SD broadcast standards in Australia), to 2160p.  Unfortunately, whenever I reboot my IceBox, it does an HDMI handshake with the TV, and defaults to 2160p/30.0Hz.

If you change the Display settings in the IceBox, to 1080p & 50.0 Hz, then the audio delay problems should go away.  You may still experience a small delay, if you're relaying the sound through the TV to an AV system, but it shouldn't be more than 0.25-0.3 seconds - nothing like the 5+ second delays that some people are reporting.

Ian_AW

Interesting.

When I first started my IceBox it selected 3840 and 30 Hz however after manually setting it to 1920 and 50 Hz it has stayed that way through many reboots and power cycles (my choice), the most recent being this morning.