How do I get SBSHD epg. Currently there only seems to be 1 or 2 shows a day scheduled in the epg.
I have SBS HD on my 4 Toppys going for about a week ahead, as does my SKIPPA. Have you done a service rescan (you should do one if LCN 33 is not displayed as Food Network).
Ian
Quote from: IanL-S on November 17, 2015, 11:00:05 AM
I have SBS HD on my 4 Toppys going for about a week ahead, as does my SKIPPA. Have you done a service rescan (you should do one if LCN 33 is not displayed as Food Network).
Ian
Sbs3 is fine.
Also the iPhone app is the same, ie there's only 4 shows today on sbshd in the app, nothing tomorrow and only two shows on Thursday. The app shows the same data as in my T3.
Online guide seems ok.
Actually this seems to be a problem with the icetv epg data for sbshd. The epg is fine from Sunday but is almost blank from today until Saturday. The guide on the T3 and the app are the same.
In Sydney all OK on all my devices inc the T2 and all Apps Simon....
Seems like a regional gap issue. Here is a screenshot of the iPhone app for today. Similar every day this week until Sunday. The epg on the T3 looks the same.
Yep, must be a regional issue - no missing programs between the time slots you show on your screen shot above.
My T3 is now showing data for sbshd but the iPhone app still isn't.
On the IceTV app I'm also missing a big chuck of the EPG for SBS and SBSHD for tomorrow (19-Nov). I'm in Melbourne.
At 4:10am there's "The Food Lovers' Guide to Australia" and then nothing until 9:40pm with "The Fall, S2 E2"
I've haven't checked my T4 yet but I really want to record "The Fall, S2 E1" which is on at 8:30pm (ie. just before E2).
On the IceTV website the guide is complete and it is showing both episodes will be recorded.
Try resetting the app to get the right data. Under settings > reset application, this will clear the app and download the epg again. I have discovered I need to do this every day to get rid of the large gaps that keep appearing.
In terms of on the BW, I had a large gap last night in SBS HD until 1.45 am, it was ok on SBS1. But even if I have gaps in the epg, timers still seem to get sent correctly so I haven't missed any recordings.
Quote from: simoncasey on November 18, 2015, 08:57:39 AMBut even if I have gaps in the epg, timers still seem to get sent correctly so I haven't missed any recordings.
As a matter of interest do these timers (with gaps in the epg) have correct titles?
Quote from: raymondjpg on November 18, 2015, 10:38:32 AM
Quote from: simoncasey on November 18, 2015, 08:57:39 AMBut even if I have gaps in the epg, timers still seem to get sent correctly so I haven't missed any recordings.
As a matter of interest do these timers (with gaps in the epg) have correct titles?
Yes, they all seem fine in that respect. But at the moment there doesn't appear to be any gaps so I cant confirm/test it.
Quote from: simoncasey on November 18, 2015, 11:03:20 AMYes, they all seem fine in that respect. But at the moment there doesn't appear to be any gaps so I cant confirm/test it.
Thanks. The reason I ask is that when I was running a Topfield TF7100HDPVRt on IceTV, timer titles relied on the epg coming across correctly first. If it did not then timers could come across but with no title, just the channel LCN and correct time. They recorded OK.
Quote from: raymondjpg on November 18, 2015, 11:18:03 AM
Quote from: simoncasey on November 18, 2015, 11:03:20 AMYes, they all seem fine in that respect. But at the moment there doesn't appear to be any gaps so I cant confirm/test it.
Thanks. The reason I ask is that when I was running a Topfield TF7100HDPVRt on IceTV, timer titles relied on the epg coming across correctly first. If it did not then timers could come across but with no title, just the channel LCN and correct time. They recorded OK.
There is an issue where timers with no title sometimes appear in the timer list well into the future, but that always seems to resolve itself closer to the time of the recording.
Quote from: simoncasey on November 18, 2015, 11:20:40 AMThere is an issue where timers with no title sometimes appear in the timer list well into the future, but that always seems to resolve itself closer to the time of the recording.
That may be because the Beyonwiz T series is a bit smarter than the Topfield TF7100HDPVRt when it comes to refreshing timer data from the EPG. It certainly works well with EPGRefresh and autotimers.
Quote from: raymondjpg on November 18, 2015, 11:33:42 AM
Quote from: simoncasey on November 18, 2015, 11:20:40 AMThere is an issue where timers with no title sometimes appear in the timer list well into the future, but that always seems to resolve itself closer to the time of the recording.
That may be because the Beyonwiz T series is a bit smarter than the Topfield TF7100HDPVRt when it comes to refreshing timer data from the EPG. It certainly works well with EPGRefresh and autotimers.
The IceTV implementation on the TF7100HDPVRt (not the TF7100HDPVRt Plus) is primitive. It has not, as far as I recall, been changed since the model was released (must have been 2007 or 2008). There has not been a firmware update for more than 5 years.
Ian
Quote from: raymondjpg on November 18, 2015, 11:33:42 AM
That may be because the Beyonwiz T series is a bit smarter than the Topfield TF7100HDPVRt when it comes to refreshing timer data from the EPG.
Interesting. My "Fargo" timer last week had a generic name once it recorded (I didn't check the timer list to see the name). I notice in my future timers last time I checked a about a week ago an entry or two with blank names..(or maybe it *was* the Fargo timer that I saw, since I have the option enabled to keep my list of previous timers for a while, so I can check to see if I can't find a recording if a timer was actually created or not, I am new to the T4 so don't 100% trust it yet..)
Sydney T4 user.
Quote from: tonymy01 on November 19, 2015, 08:50:03 AMInteresting. My "Fargo" timer last week had a generic name once it recorded (I didn't check the timer list to see the name). I notice in my future timers last time I checked a about a week ago an entry or two with blank names..(or maybe it *was* the Fargo timer that I saw, since I have the option enabled to keep my list of previous timers for a while, so I can check to see if I can't find a recording if a timer was actually created or not, I am new to the T4 so don't 100% trust it yet..)
Sydney T4 user.
It suggests that the process for setting IceTV timers on the Beyonwiz T series is similar to that for the Topfield TF7100HDPVRt. My initial query related to the question does IceTV update (or overwrite) timers without names on the T series on its periodic refresh. My recollection of the process with the Topfield was that it did not, unless there was a change in the schedule for the timer.
I think it might be the T3 that does it. I just noticed a blank timer in my lot of timers. Checking the epg shows that there is epg data for it. I restarted the T3 and the timer now shows the correct title. There was no icetv log mention that it had been updated.
As u mentioned in my previous post, I often have a timer with a blank title in the timer list, normally 7+ days away. But they are always resolved by the time it comes for the recording.
Quote from: simoncasey on November 19, 2015, 10:31:00 AM
I think it might be the T3 that does it. I just noticed a blank timer in my lot of timers. Checking the epg shows that there is epg data for it. I restarted the T3 and the timer now shows the correct title. There was no icetv log mention that it had been updated.
As u mentioned in my previous post, I often have a timer with a blank title in the timer list, normally 7+ days away. But they are always resolved by the time it comes for the recording.
Have you tried using the Refresh option for your timer list in the Webif interface? I haven't checked but I suspect if it is in the Webif interface it will also be somewhere on the T series TV GUI.
Quote from: raymondjpg on November 19, 2015, 10:52:41 AM
Have you tried using the Refresh option for your timer list in the Webif interface? I haven't checked but I suspect if it is in the Webif interface it will also be somewhere on the T series TV GUI.
Refresh in webif doesn't seem to fix it.