Is there a reason why my Beyonwiz and IceTV connected devices can only see Network 7 EPG information?
Is this a glitch, hopefully :)
First noticed Sunday 17 Sept.
I await updates :) Thanks, Robert.
Hi Robert,
By your account you have two active PVRs, a T3 and T4 (but three more listed in your My Recorders that maybe you should delete!) The T3 logs in every two minutes, the T4 every 15 (as per our defaults).
Are you missing the data on both or just one?
Hello, Apologies for the delay in responding.
The T3 has indeed been set for 2 min and just now reset to 15, in case there is a consistency required, or does that work on a device to device basis. What's recommended minimum time, btw.
In recent minutes, I found that if I disable my IceTV account I can get the free to air EPGs, log back in and the various networks except 7 drop off.
The T4 acts in the same way.
Yes I have 3 others, 2 of them I am about to sell and deactivate, but this hasn't seemed to caused me any problem with IceTV setting of programs.
For now, I am thinking there is a glitch with my IceTV account which I would like to get sorted quickly as I am in coming days going overseas and need to have the system functioning as expected so I can set and record programs after I receive the bi-weekly emails.
Hope that helps, so await your reply, Robert.
Update, 2 Beyonwiz DP's have been removed as I agree they are no longer required.
Hi Robert,
We have no other problem PVRs so as a first step I'd suggest re-running an IceTV setup wizard in either one, as I think you suggest both are affected, and see if that clears the issue.
Hi Robert,
I had a look and for some reason your account had all channels disabled except for the 7 network channels.
I have just re-enabled them now, they may just download automatically, otherwise if you force a full refresh on the Beyonwiz they will now populate with data.
Hello Daniel,
Thank you, that seems to have sorted it, I disabled IceTV, then asked it to fetch and after a longish think it seems to be fine on both the T3 & T4.
A couple of questions, please.
I do not recall doing anything weird to the T4 and the T3 was only being reset and retuned after recently purchasing. Can you suggest what the reason for the network blocking might be caused by, me or IceTV? Out of technical curiosity only.
Both the T3 & T4 are set for EPG checking at 15 min, is it OK to reduce to 5 or even 2 min?
Would this also be the same for the DP-P2 & the DP-Lite that I still have?
Thank you again Daniel.
kind regards, Robert.
Hi Robert,
The most likely cause is that a channel scan of some kind would have only found the 7 network channels, then only those were sent to the IceTV server, there is a function where unscanned channels get disabled on an account with the newer Beyonwiz devices. This is likely what happened, and once disabled they don't get re-enabled except if you manually do it under the My Account settings of the IceTV website.
5 mins and 2 mins are both fine, as long as timers are checked as well, as this is what is really important.
While the channels were disabled on your account this would have affected the older Beyonwiz's, but they also don't have the same function to auto disable channels.
Quote from: Robert_M on September 18, 2023, 05:28:57 PMThe T3 has indeed been set for 2 min and just now reset to 15, in case there is a consistency required, or does that work on a device to device basis. What's recommended minimum time, btw.
The time between updates is set individually per PVR, on the PVR (at least on Beyonwiz devices). There's no reason on the PVR side why they must be the same, and as far as I know, no reason on the IceTV server side why they must be the same.
Checking for updates every 2 minutes seems unnecessarily frequent, though.
Hello prl,
Thanks for that info and yes 2 min is probably too often, but if you are testing the timers and are updating you don't have to wait so long. I will set to 10 or 15 for long term.
Thanks again for the reply.
Quote from: Robert_M on September 19, 2023, 09:47:10 AMif you are testing if the timers are updating you don't have to wait so long
I do that by a once-off forced update in MENU>IceTV.
Hello Peter,
It seems I had forgotten that one, so just to clarify, on a T3 & T4 within the menu>icetv> option2:
Fetch EPG and update timers now? If yes I had not realised this was the once-off update request.
Thus not requiring regular updates more often than 15 min?
All that's left to find out is what I may have done to cause my original problem or an unfortunate glitch at the other end, knowing that these things occasionally happen :)
Best regards, Robert.
Quote from: Robert_M on September 19, 2023, 05:33:17 PMmenu>icetv> option2:
Fetch EPG and update timers now?
Yes, that's the one I meant.