Main Menu

Sounds

Started by Ian_AW, March 06, 2023, 09:52:10 PM

Previous topic - Next topic

Ian_AW

G'day,

Now for something odd.

I used to get feedback sounds for various picks of the remote control.

For example, do delete a recording after it has been watched, I would get e click sound from the IceBox when I picked the properties button, and then when scrolling down to the Delete option. Then again when moving highlight to confirm and then on pressing Yes, something like crushing paper.

Don't know what happened, but all of a sudden they no longer play.

Any pointers on how to enable them?

Thanks.

IanL-S

There is a setting somewhere that controls this, but I cannot remember where it is located. When members of the beta team were first setting up our IceBox we were given instructons on how to check that the RCU command request sound was active.

Will keep an eye out for a note about how to do this and post here if/when I find it.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

MD

It is not present if the sound is muted?

vader1111

Go to Settings -> System -> Audio
Scroll down to the GUI Sounds section
Check what Play GUI Sounds is set to - it should be "Only whe playback stopped".

Other possible causes...
Settings -> System -> Audio
In the Audio Decoder section, check the Number of Channels - it should be set to 2.0.

Settings -> System -> Audio
In the Audio Passthrough section - check that Allow Passthrough is disabled.

Ian_AW

Thanks for the suggestions.

Go to Settings -> System -> Audio
Scroll down to the GUI Sounds section
Check what Play GUI Sounds is set to - it should be "Only whe playback stopped".

My settings are as above.


Settings -> System -> Audio
In the Audio Decoder section, check the Number of Channels - it should be set to 2.0.

My settings are as above


Settings -> System -> Audio
In the Audio Passthrough section - check that Allow Passthrough is disabled.

My settings are as above.


It is weird.

The only other area I was looking into was some suggestions on subtitles and this was to see if subtitles could be downloaded using OpenSubtitles.org. This added OpenSubtitles.org to My Add-ons.

Now I have gone back on any changes because it required an account to be created and I did not have the time to spare, however the add-on is still there. Not sure how to remove the add-on if that is the cause.

vader1111

To uninstall an add-on:
Settings -> Add-ons -> My add-ons -> All
Find the add-on you wish to delete, and click on it
Uninstall button is in the bottom right corner.

Having said that, I cannot for the life of me think why the OpenSubtitles add-on would have any affect at all on GUI sounds.

Ian_AW

Quote from: vader1111 on March 08, 2023, 10:01:55 AMTo uninstall an add-on:
Settings -> Add-ons -> My add-ons -> All
Find the add-on you wish to delete, and click on it
Uninstall button is in the bottom right corner.

Having said that, I cannot for the life of me think why the OpenSubtitles add-on would have any affect at all on GUI sounds.

Hard to believe, but the sounds have returned but a lot more quiet than before.

I had a look at the Kodi UI Sounds add-on, but while there is a settings option, it is greyed and so inaccessible.

I will have to see if there is another way of changing the interface sounds volume.

Thanks.

Ian_AW

Ok, I managed to track it down to the volume settings.

When watching a recording or a TV channel, if you press the Properties button on the remote and then pick the settings option at the bottom, you get a menu where you can adjust the audio and video settings.

If you pick the Audio option, these are what you get as standard.

Volume: -12.0 db
Volume Amplification: 0.0 db
Downmix Centre mix level: -12

These settings give you the standard volume levels.

If you change the Volume Amplification setting to say 12 db to get a consistent volume setting from a sound bar, you end up not being able to hear the UI sounds.

So with these settings, if you switch to the TV to watch a streaming service like Kayo, you end up with a very high volume and you have to throttle the sound bar before anyone complains :D

The "convenient" solution was to just use the Volume Amplification option and set it to say 12 db only now the GUI sounds were too low because the IceBox volume was too low as far as the UI was concerned. The UI volume requires the volume set at somewhere close to 90% or 95%.

The Kodi UI Sounds Add-on has a settings option, only it is greyed out. Chances are there is an option to tickle the UI sounds up a touch.