Setting end padding to 15 minutes

Started by Ian_AW, January 27, 2023, 08:51:50 PM

Previous topic - Next topic

Ian_AW

G'day,

I am having trouble getting my IceBox to use end padding of 15 minutes.

I have set this in

Kodi Cog > PVR & Live TV > Recordings

but whenever a new recording is set, it defaults back to 30 minutes.

I thought it was getting this from the previous timer information for recurring timers, but no.

I set two new timers a few minutes ago using the iPhone App and thought it would get its settings from the values I set above, but no, it went back and used 30 minutes.

Is there another place I have to set this value as well? 30 minutes is a little too high, particularly for a half hour show.

Thanks in advance.

Ian_AW

I checked the timer list this morning and ALL the new timers automatically set overnight have 30 minute end padding even though I cannot find any setting that has anything to do with an end padding of 30 minutes.

It's getting this from somewhere. Is it hardcoded in the IceBox programming?

Is there a setting in the web portal that might be doing this?

vader1111

#2
At present it's getting the padding settings from the TVHeadend addon settings.  It's supposed to be getting them from the PVR & Live TV settings, and this is a known bug which they're working on.

To access the TVHeadend settings, go to http://<icebox ip address>:9981/extjs.html# in your web browser (insert the IP address of the IceBox from your own network).

You can set the padding for individual channels by going to Configuration -> Channel / EPG -> Channels, and setting the Pre-recording padding and Post-recording padding.  Don't forget to hit Save after you make your changes.

Alternatively, you can set the default padding for all channels, by going to Configuration -> Recording -> Digital Video Recording Profiles.  You will see 2 profiles listed - (Default profile), and IceTV.  The IceTV profile is for timers sent from the IceTV system, the Default profile is used for timers created locally on the IceBox.  Once again, you can set the Pre-recording padding and Post-recording padding values.  Remember to Save.

Settings for Individual channels override the Profile settings.

Hopefully the IceTV Addon will be updated soon, to use the PVR & Live TV padding settings.

IanL-S

Unfortunately, as explained by Vader1111, the current situation is complex, and hopefully will be resovled soon.

While many users prefer "universal" padding settings, some may prefer the ability to use different padding for individual LCNs. Longer padding is frequently required for commercial networks which play fast and loose with start and end times. Accordingly I like the approach taken by TVheadend. I can do the same with my Toppys and Beyonwiz using SmartEPG TMS and SmartEPG vu+ respectively.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

Ian_AW

I went ahead and applied the second option to make it global. Setting it in Kodi gave only one global option, so not too worried.

It was interesting finding out where the steps were selected, but I got through and made the changes. I have printed the instructions out and put them in the box in which everything came.

For those not prepared to go in and change things themselves, is there any way it can be done via a utility? It might take pressure off IceTV and let them address other matters? Something like a commandline utility where the user simply typed in something like

"end_padding 15"<enter>

where the value can be changed.

And while we are at it, a similar one for start padding. This way there is no way to do the wrong thing.

Now for subtitles and chaseplay :D

vader1111

The plan is for users to change it via Settings -> PVR & Live TV, in the Kodi interface.  Unfortunately, this is still a work in progress.

You all get the benefit of being "early adopters"!

Ian_AW


martpc

While looking at the add-ons-services-IceTV-Configure I found a Pre-Padding and Post-Padding entries that were both set to 0.  I do not know the inter-relationship between this IceTV Kodi Add-on and the Kodi program so I am a little bit scared of experimenting with what is basically a black box to me ie no documentation to the Add-on functionality to Kodi.  If I brick the IceBox is that covered by warranty?

MD

Hi, The IceBox is covered by a 12 month warranty which would cover all its hardware.  It would be unlikely you could 'brick' the box with any other add-ons that are available via Kodi itself.

Currently the padding defaults to 3/30 and we are working on making that variable to suit a users preferences but that is taking second place to other more important bug fixes right now.  Give us a few weeks to get on top of everything.

IanL-S

You can change the default in TVHeadend (could have changed in the last week).

You log into TVheadend: http://{IP address of IceBox):9981/

Select the Configuration tab; the click on the Recording tab, then select the IceTV profile in the left colum. Chnage the values for pre and post pading, and click the Save button (fourth row from the Top, leftmost tab).

The new padding only applies to timers sent to the IceBox after they were changed.

Hope this helps

Ian

Hope this helps.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

IanL-S

Quote from: MD on February 14, 2023, 05:52:38 PMHi, The IceBox is covered by a 12 month warranty which would cover all its hardware.  It would be unlikely you could 'brick' the box with any other add-ons that are available via Kodi itself.
.....

In the unlikely event of the IceBox being bricked, you should be able to reinstall the LibreELEC installation booting the IceBox from a USB Stick.

Instructions on how to do this will be on the IceTV wiki (when I have time to get it up and running).
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

Ian_AW

Quote from: IanL-S on February 16, 2023, 10:50:17 AMYou can change the default in TVHeadend (could have changed in the last week).

You log into TVheadend: http://{IP address of IceBox):9981/


I can understand the caution. you have multiple rows of tabs, so you do have to be careful, but it is fairly straightforward.

One thing I noticed in the add on that lets you force a refresh of the EPG is there are a series of prompts for information to set both pre and post padding, However, not sure if it does anything or is a marker for where that adjustment might eventually end up.

It asks for:

Email Address:
Password:
TVHeadEnd IP:
TVHeadEnd Port:
TVHeadEnd Username:
TVHeadEnd Password:
Pre Padding:
Post Padding:

Not sure if entering the requested information here will do anything.

IanL-S

Quote from: Ian_AW on February 16, 2023, 04:15:57 PMOne thing I noticed in the add on that lets you force a refresh of the EPG is there are a series of prompts for information to set both pre and post padding, However, not sure if it does anything or is a marker for where that adjustment might eventually end up.

It asks for:

Email Address:
Password:
TVHeadEnd IP:
TVHeadEnd Port:
TVHeadEnd Username:
TVHeadEnd Password:
Pre Padding:
Post Padding:

Not sure if entering the requested information here will do anything.

I'm a bit confused here. Are you using the TVHeadend web interface, or something on the IceBox itslef. [Configuation of LibreELEC is a minefiled (aprticularly when you have the IceTV and TVheadend add-ons.]

As far as I am aware the only way to force an update to the EPG data is via IceTV adon; the first item will force timer and EPG download. It may or may not change the pre- and post- padding if it have recently been changed using the TVHeadend web interface.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

vader1111

Quote from: IanL-S on February 16, 2023, 05:20:09 PM
Quote from: Ian_AW on February 16, 2023, 04:15:57 PMOne thing I noticed in the add on that lets you force a refresh of the EPG is there are a series of prompts for information to set both pre and post padding, However, not sure if it does anything or is a marker for where that adjustment might eventually end up.

It asks for:

Email Address:
Password:
TVHeadEnd IP:
TVHeadEnd Port:
TVHeadEnd Username:
TVHeadEnd Password:
Pre Padding:
Post Padding:

Not sure if entering the requested information here will do anything.

I'm a bit confused here. Are you using the TVHeadend web interface, or something on the IceBox itslef. [Configuation of LibreELEC is a minefiled (aprticularly when you have the IceTV and TVheadend add-ons.]

As far as I am aware the only way to force an update to the EPG data is via IceTV adon; the first item will force timer and EPG download. It may or may not change the pre- and post- padding if it have recently been changed using the TVHeadend web interface.
The settings quoted are for the IceTV addon itself, not TVHeadend.

There are currently 3 different places where you pre- & post- padding can (theoretically) be set - the TVHeadend web interface, the IceTV addon configuration settings, and in Kodi's PVR & Live TV settings.  In reality, only the TVHeadend web interface method works - the other two do nothing.

It is hoped that a future firmware release will connect the TVHeadend settings to the Kodi PVR & Live TV settings, but that hasn't happened yet.

Ian_AW

The IceBox automatically installed the add on to Force EPG Update, and when I ran it, I was presented with the attached screen. Apologies for getting the title mixed up.