G'day,
I am having trouble getting my IceBox to use end padding of 15 minutes.
I have set this in
Kodi Cog > PVR & Live TV > Recordings
but whenever a new recording is set, it defaults back to 30 minutes.
I thought it was getting this from the previous timer information for recurring timers, but no.
I set two new timers a few minutes ago using the iPhone App and thought it would get its settings from the values I set above, but no, it went back and used 30 minutes.
Is there another place I have to set this value as well? 30 minutes is a little too high, particularly for a half hour show.
Thanks in advance.
I checked the timer list this morning and ALL the new timers automatically set overnight have 30 minute end padding even though I cannot find any setting that has anything to do with an end padding of 30 minutes.
It's getting this from somewhere. Is it hardcoded in the IceBox programming?
Is there a setting in the web portal that might be doing this?
At present it's getting the padding settings from the TVHeadend addon settings. It's supposed to be getting them from the PVR & Live TV settings, and this is a known bug which they're working on.
To access the TVHeadend settings, go to http://<icebox ip address>:9981/extjs.html# in your web browser (insert the IP address of the IceBox from your own network).
You can set the padding for individual channels by going to Configuration -> Channel / EPG -> Channels, and setting the Pre-recording padding and Post-recording padding. Don't forget to hit Save after you make your changes.
Alternatively, you can set the default padding for all channels, by going to Configuration -> Recording -> Digital Video Recording Profiles. You will see 2 profiles listed - (Default profile), and IceTV. The IceTV profile is for timers sent from the IceTV system, the Default profile is used for timers created locally on the IceBox. Once again, you can set the Pre-recording padding and Post-recording padding values. Remember to Save.
Settings for Individual channels override the Profile settings.
Hopefully the IceTV Addon will be updated soon, to use the PVR & Live TV padding settings.
Unfortunately, as explained by Vader1111, the current situation is complex, and hopefully will be resovled soon.
While many users prefer "universal" padding settings, some may prefer the ability to use different padding for individual LCNs. Longer padding is frequently required for commercial networks which play fast and loose with start and end times. Accordingly I like the approach taken by TVheadend. I can do the same with my Toppys and Beyonwiz using SmartEPG TMS and SmartEPG vu+ respectively.
I went ahead and applied the second option to make it global. Setting it in Kodi gave only one global option, so not too worried.
It was interesting finding out where the steps were selected, but I got through and made the changes. I have printed the instructions out and put them in the box in which everything came.
For those not prepared to go in and change things themselves, is there any way it can be done via a utility? It might take pressure off IceTV and let them address other matters? Something like a commandline utility where the user simply typed in something like
"end_padding 15"<enter>
where the value can be changed.
And while we are at it, a similar one for start padding. This way there is no way to do the wrong thing.
Now for subtitles and chaseplay :D
The plan is for users to change it via Settings -> PVR & Live TV, in the Kodi interface. Unfortunately, this is still a work in progress.
You all get the benefit of being "early adopters"!
No problem. Thanks for the help.
While looking at the add-ons-services-IceTV-Configure I found a Pre-Padding and Post-Padding entries that were both set to 0. I do not know the inter-relationship between this IceTV Kodi Add-on and the Kodi program so I am a little bit scared of experimenting with what is basically a black box to me ie no documentation to the Add-on functionality to Kodi. If I brick the IceBox is that covered by warranty?
Hi, The IceBox is covered by a 12 month warranty which would cover all its hardware. It would be unlikely you could 'brick' the box with any other add-ons that are available via Kodi itself.
Currently the padding defaults to 3/30 and we are working on making that variable to suit a users preferences but that is taking second place to other more important bug fixes right now. Give us a few weeks to get on top of everything.
You can change the default in TVHeadend (could have changed in the last week).
You log into TVheadend: http://{IP address of IceBox):9981/
Select the Configuration tab; the click on the Recording tab, then select the IceTV profile in the left colum. Chnage the values for pre and post pading, and click the Save button (fourth row from the Top, leftmost tab).
The new padding only applies to timers sent to the IceBox after they were changed.
Hope this helps
Ian
Hope this helps.
Quote from: MD on February 14, 2023, 05:52:38 PMHi, The IceBox is covered by a 12 month warranty which would cover all its hardware. It would be unlikely you could 'brick' the box with any other add-ons that are available via Kodi itself.
.....
In the unlikely event of the IceBox being bricked, you should be able to reinstall the LibreELEC installation booting the IceBox from a USB Stick.
Instructions on how to do this will be on the IceTV wiki (when I have time to get it up and running).
Quote from: IanL-S on February 16, 2023, 10:50:17 AMYou can change the default in TVHeadend (could have changed in the last week).
You log into TVheadend: http://{IP address of IceBox):9981/
I can understand the caution. you have multiple rows of tabs, so you do have to be careful, but it is fairly straightforward.
One thing I noticed in the add on that lets you force a refresh of the EPG is there are a series of prompts for information to set both pre and post padding, However, not sure if it does anything or is a marker for where that adjustment might eventually end up.
It asks for:
Email Address:
Password:
TVHeadEnd IP:
TVHeadEnd Port:
TVHeadEnd Username:
TVHeadEnd Password:
Pre Padding:
Post Padding:
Not sure if entering the requested information here will do anything.
Quote from: Ian_AW on February 16, 2023, 04:15:57 PMOne thing I noticed in the add on that lets you force a refresh of the EPG is there are a series of prompts for information to set both pre and post padding, However, not sure if it does anything or is a marker for where that adjustment might eventually end up.
It asks for:
Email Address:
Password:
TVHeadEnd IP:
TVHeadEnd Port:
TVHeadEnd Username:
TVHeadEnd Password:
Pre Padding:
Post Padding:
Not sure if entering the requested information here will do anything.
I'm a bit confused here. Are you using the TVHeadend web interface, or something on the IceBox itslef. [Configuation of LibreELEC is a minefiled (aprticularly when you have the IceTV and TVheadend add-ons.]
As far as I am aware the only way to force an update to the EPG data is via IceTV adon; the first item will force timer and EPG download. It may or may not change the pre- and post- padding if it have recently been changed using the TVHeadend web interface.
Quote from: IanL-S on February 16, 2023, 05:20:09 PMQuote from: Ian_AW on February 16, 2023, 04:15:57 PMOne thing I noticed in the add on that lets you force a refresh of the EPG is there are a series of prompts for information to set both pre and post padding, However, not sure if it does anything or is a marker for where that adjustment might eventually end up.
It asks for:
Email Address:
Password:
TVHeadEnd IP:
TVHeadEnd Port:
TVHeadEnd Username:
TVHeadEnd Password:
Pre Padding:
Post Padding:
Not sure if entering the requested information here will do anything.
I'm a bit confused here. Are you using the TVHeadend web interface, or something on the IceBox itslef. [Configuation of LibreELEC is a minefiled (aprticularly when you have the IceTV and TVheadend add-ons.]
As far as I am aware the only way to force an update to the EPG data is via IceTV adon; the first item will force timer and EPG download. It may or may not change the pre- and post- padding if it have recently been changed using the TVHeadend web interface.
The settings quoted are for the IceTV addon itself, not TVHeadend.
There are currently 3 different places where you pre- & post- padding can (theoretically) be set - the TVHeadend web interface, the IceTV addon configuration settings, and in Kodi's PVR & Live TV settings. In reality, only the TVHeadend web interface method works - the other two do nothing.
It is hoped that a future firmware release will connect the TVHeadend settings to the Kodi PVR & Live TV settings, but that hasn't happened yet.
The IceBox automatically installed the add on to Force EPG Update, and when I ran it, I was presented with the attached screen. Apologies for getting the title mixed up.
OK understand what you are getting at now. When Daniel created the ability to request timer/EPG download he located it in the IceTV configuration. It is independent of all the other things that are there - you just select the update EPG the click on OK. This is completely independent from the other things found there.
The reason I linked the add on to changing the setting in TVHeadEnd was because information to access TVHeadEnd was asked for.
The IP is the IceBox IP address, the port is 9981, and somewhere I recall being told to ignore any request for a TVHeadEnd username and password.
Thanks for the explanation.
You only need a user name and password for TVheadend www portal if you set up a user name and password previously. That may be considered prudent as there is a (relatvely small) risk someone could break into the IceBox via the TVheadend www page.
That is what you should see. Move to the first item Force EPG update, then move to OK and press OK and it will happen. The stuff below is irrelevant to Force EPG Update.
Ian
Quote from: IanL-S on February 16, 2023, 10:50:17 AMYou can change the default in TVHeadend (could have changed in the last week).
You log into TVheadend: http://{IP address of IceBox):9981/
Select the Configuration tab; the click on the Recording tab, then select the IceTV profile in the left colum. Chnage the values for pre and post pading, and click the Save button (fourth row from the Top, leftmost tab).
The new padding only applies to timers sent to the IceBox after they were changed.
Hope this helps
Ian
Hope this helps.
It no longer works like this; there is no loger an ability to select a profile.
It is possible that the only profile presented is the one that works for IceTV. I will test and report back. Looks like the default is now being set in the Kodi Settings for PVR/TV where under recordings the 3/30 values are found.
Ian
Quote from: IanL-S on February 18, 2023, 12:56:57 PMIt no longer works like this; there is no loger an ability to select a profile. It is possible that the only profile presented is the one that works for IceTV. I will test and report back. Looks like the default is now being set in the Kodi Settings for PVR/TV where under recordings the 3/30 values are found.
Ian
Does this mean that while a different value can be set in PVR/TV, when IceTV sends timers, they will have the padding set to 3/30?
Quote from: Ian_AW on February 18, 2023, 01:35:30 PMDoes this mean that while a different value can be set in PVR/TV, when IceTV sends timers, they will have the padding set to 3/30?
The value set in PVR/TV is used for timers set by IceTV (initially 3/30). If you change that setting, fore exmple to 15/30, then the 15/30 padding only apply to new timers downloaded after that setting is changed.
This behaviour may change in the future, but it is what happens at the moment.
Ian
Thanks.