Recovering after uncontrolled shutdown.

Started by Ian_AW, July 24, 2026, 02:00:54 PM

Previous topic - Next topic

Ian_AW

G'day,

In my new location of the ACT, there were a couple of uncontrolled power outages because of the low temperatures and and an issue with the suppliers equipment.

Unfortunately because of the abrupt nature of the shutdown, the IceBox reboots and gets a screen asking for a wireless network passphrase. This is where it stalls.

I've tried various passphrases I have but no success.

I am left with few options other than to do a hard reset, only where is the option to do a hard reset?

Can anyone please point me in the direction of the option to do a hard reset? The option for a soft reset would also be handy.

Thanks to the kind soul able to provide this.

raymondjpg

Quote from: Ian_AW on July 24, 2026, 02:00:54 PMCan anyone please point me in the direction of the option to do a hard reset? The option for a soft reset would also be handy.
One way of doing it would be to download the latest Icebox firmware, drop it in the Update  folder and reboot the box. That is if IceBox has booted up to the extent that the folders can be seen on a networked Windows PC.

To see these folders type \\IceBox LAN IP Address, or simply ICEBOX (if you didn't rename Icebox at initial installation) in Windows file explorer.

If you are networked to a Mac or a Linux box you'll need some input from others.

The procedure will result in the equivalent of a hard reset. I don't know of any way to trigger a soft reset other than from within the settings of Icebox.

That is my best recollection. I'm happy to be shown to be wrong about any of the details!
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

Ian_AW

Thanks. The info goes in the folder.

I drive my IceBox via a Rii USB wireless mini keyboard.

When going to close up for the day, I noticed the red LED on the keyboard was on, indicating I should recharge it.

I put it on charge and had dinner. It was still on recharge but decided to use it while charging. To my surprise, it went through the reset stage and the IceBox is now working.

I had previously recharged the Rii around 3 weeks ago so was due for a recharge.

It looks like codes are not being sent when Rii charge is low.

Anyone else seen such behaviour?

Thanks.