G'day,
When I turned things on this morning, the 9 Network shows Channel 90 and then Channel 96.
I'm in Sydney and it should be showing a lot more. I am getting my IceBox to show All Channels.
Does this mean a soft reset or can I scan for just the 9 Network channels?
Thanks.
You can go into TVHeadend and run its setup wizard. However, if it thinks the "channel" has been scanned it may not do it again. Same if you do a soft reset. Have you checked that all channels are select in TVHeadend (should have a tick against them) - if not try reselecting them.
As far as I am aware, the only way to force a proper scan is to do a hard reset which will delete your recordings. You can copy the "recordings" directory to USB drive and then do hard reset; then copy the contents of the recordings directory back to the IceBox, do a soft reset and (hopefully) the recordings (and timers) will be reinstated.
I don't have my IceBox in front of me at them moment. However, I think that I once disabled and then re-enabled the mux in tvheadend and that forced a rescan.
Also, I seem to recall that in the Kodi DVR settings, there is also a rescan button.
Quote from: DeltaMikeCharlie on May 30, 2023, 04:06:27 PMI don't have my IceBox in front of me at them moment. However, I think that I once disabled and then re-enabled the mux in tvheadend and that forced a rescan.
Also, I seem to recall that in the Kodi DVR settings, there is also a rescan button.
There is a clear data button in Settings|PVR|Guide, which clears out the entire EPG. Then it is a matter of waiting to see if the EPG re-populates on subsequent polls of the server.
There is also the Refresh EPG Data:
KODI > Add-ons > IceTV > Force full guide update
It is the first item and should be highlighted when it opens, move to OK and click. You will not see anything happen as it works in background.
The long way of getting to this setting is:
KODI > Settings > Add-ons > My add-ons > Service > IceTV > Configure >