Main Menu

New IceBox - DOA?

Started by nodyel, December 10, 2023, 06:48:40 PM

Previous topic - Next topic

nodyel

Okay, I ducked out and picked up a couple of cables (I will have another use for one of them anyway as i want to upgrade one of my monitors).

One is 1.2m rated for 4K @ 18Gbps, and the other is 2m and 8K @ 48Gbps.

Exactly the same result - logo appears for a few seconds, then blank screen for a little while, and then TV reports no signal.

Mike.
Beyonwiz U4

raymondjpg

Quote from: nodyel on December 11, 2023, 12:59:59 PMNo, not on the internet yet - was planning on connecting it to wifi, but as I can't do any set up that hasn't been done.
The reason I ask is that all installations of the IceBox BYO that I have done so far have been on devices that have an already established connection to the internet. It is certainly needed somewhere in the routine to set up a connection with the IceTV servers.

I'd be trying to set up what is needed for a wifi connection in advance of booting up the IceBox i.e. ensuring that whatever router it will be connecting to is configured to accept it.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

Daniel Hall at IceTV

Hi Mike,

Does the light on the front of the IceBox go off at all, or just stay on all the time?

Does it flash after about 30 seconds or so?
Regards,

Daniel.
CTO.

Daniel Hall at IceTV

The other thing to try is to reload the IceBox firmware.

You can use the instructions from the BYOB setup to create the installation media, these are found at https://support.icetv.com.au/hc/en-us/articles/6591367595407-IceBox-BYOB-Installation-Links
Regards,

Daniel.
CTO.

nodyel

Hi Daniel,

As far as have noticed, no sign of any flashing - it just comes on and stays on. I just tried and it was solid for more than 5 minutes.

I'll give the reload a try.

Cheers,

Mike.
Beyonwiz U4

nodyel

No luck with the reload.

First, I had a problems with the balenaEtcher program. It kept failing the validation phase at around 97%. Eventually I got a successful run after i turned of Windows autoplay, and setting the actions to take when a drive is inserted to 'take no action'. That let me get a successful run and I started testing.

Unfortunately, exactly the same result. I get the icetv logo, then the blank, then the 'no signal'. No sign of the front light flashing. I think I tried every usb socket, and with a fair mixture of the other external bits (tuners and dongle) being in or out.

Any other suggestions to try?

Mike.
Beyonwiz U4

raymondjpg

Quote from: nodyel on December 11, 2023, 05:51:52 PMFirst, I had a problems with the balenaEtcher program.....

Any other suggestions to try?
Try Rufus?
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

MD

Hi Mike,

This is excruciating and if you/we can't resolve it asap I'll send another.

Do you have a wireless keyboard so you can stop the IceBox at its BIOS screen so as to choose an option to force  it to boot onto the USB?

raymondjpg

Quote from: nodyel on December 11, 2023, 05:51:52 PMAny other suggestions to try?
Are you by chance trying to install with an img file extracted from the gz archive?
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

nodyel

Quote from: MD on December 11, 2023, 06:31:54 PMHi Mike,

This is excruciating and if you/we can't resolve it asap I'll send another.

Do you have a wireless keyboard so you can stop the IceBox at its BIOS screen so as to choose an option to force  it to boot onto the USB?

Hi,

Unfortunately I only have a bluetooth ones :-(. All my cable ones have long gone, and the ones that i did have that were wireless with a dongle have gone as well.

I could try and get out again tomorrow and pick up a cheap one. Will any keyboad dongle one work, or are they dependant on a particular driver? Would a usb connected keyboard work? I know that some of them have drivers/software that you 'need', but I think that is just to give extra 'fluff' to do extra things with them. Should any keyboard work, even with a dongle?

Mike.

Mike.
Beyonwiz U4

nodyel

Quote from: raymondjpg on December 11, 2023, 09:28:15 PM
Quote from: nodyel on December 11, 2023, 05:51:52 PMAny other suggestions to try?
Are you by chance trying to install with an img file extracted from the gz archive?

No, I just downloaded the gz archive, and then told the balenaEtcher tool to use that to 'build' the usb contents. I didn't unarchive the gz file.

Mike.
Beyonwiz U4

raymondjpg

Quote from: nodyel on December 11, 2023, 09:45:17 PMNo, I just downloaded the gz archive, and then told the balenaEtcher tool to use that to 'build' the usb contents. I didn't unarchive the gz file.
Yep. That should work.

I'm out of ideas I'm afraid.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

MD

The dongle needs to be matched to the keyboard so purchased as a pair, as is our remote (as best I know) but a wired usb one would work just as well, if they still exist.

MD

Daniel or I will give you a call tomorrow to get to the bottom of the problem.  Are you an around all day?

nodyel

Quote from: MD on December 11, 2023, 09:59:50 PMThe dongle needs to be matched to the keyboard so purchased as a pair, as is our remote (as best I know) but a wired usb one would work just as well, if they still exist.

I'll try and get down to JB or the like first thing in the morning and I should be available after that. Let's say sometine after 10am? The only firm commitment I have is that I am giving a customer some IT training between 1PM and 3PM, but allow 15 minutes before and after to set up and shut down. It's online training, so I don't have to go anywhere for it.

I'll send you a PM with my phone number in case you don't have it.

Mike.
Beyonwiz U4