IceTV Forum

IceTV IceBox => Getting Help => Topic started by: nodyel on December 10, 2023, 06:48:40 PM

Title: New IceBox - DOA?
Post by: nodyel on December 10, 2023, 06:48:40 PM
Hi,

I'll log a support ticket tomorrow, but I thought I would post here to see if someone may be watching and has a 'quick fix'.

I received my new IceBox a couple of days ago and it is only starting up part of the way.

I connected all the hardware items first as per instructions and then started it up.

Looking promising to start with in that it came up with the IceTV logo. But that is far as it gets.

After a few seconds, the screen goes blank (i.e. black). Then, after another few seconds, the TV displays a 'No Signal' message. I have left it setting there for 10 minutes or so, but nothing.

TV is a Samsung UA65MU6100.

Things I have tried:

1. 3 different HDMI cables.
2. Tried a different HDMI port (although the one I had it on worked fine with my BW U4).
3. Numerous power cycles on IceBox as I made the changes, as well as TV 'hold the power button' reboots.

Any suggestions as to what else I can try?

Looks to me like it is failing to boot fully, but I can't see anything else I can try....

Also, in the email I notification I received when it was dispatched it was mentioned "The IceBox has been shipped with our latest software."

Hopefully,
Mike.
Title: Re: New IceBox - DOA?
Post by: IanL-S on December 10, 2023, 07:19:59 PM
It is difficult to say what the problem might be.

An IceBox can throw a wobbly if it cannot find any attached USB tuners or a network connection. As you have checked all the connections and swapped cables and HDMI ports. Did you switch the HDMI port on the IceBox itself, in the early days with beta firmware sometimes one of the HDMI ports would not work properly - not seen it since the the IceBox was released to the public.

One thing you could try is to do a USB update of the software - but I would wait until IceTV get back to you. @MD is the support guru and may have other (better) advice. The process for creating a bootable installation USB stick takes a bit of work, which is why I suggest for @MD to get back to you.
Title: Re: New IceBox - DOA?
Post by: MD on December 10, 2023, 07:41:26 PM
Hi Mike,

This is strange as each is tested up to its setup screen page before shipping.  Have you tried simply pulling out its power pin for a minute then plugging it in again. As it's a miniPC its bios is reconfigured to reboot to on if there's a power cut so it continues to record so its front on/off switch only reboots it when it's plugged in. Once it's running it can be powered off like the Beyonwiz by pressing its remote button for a second and choosing power down from the tv menu, or pulling out its power pin.

Also, as Ian suggested, if the power pin out for a minute then power back on doesn't fix it just check its hdmi socket by giving it a wiggle as it's brand new.
Title: Re: New IceBox - DOA?
Post by: nodyel on December 10, 2023, 07:45:59 PM
Hi Ian,

Thanks for responding.

Yes, I tried various combinations of tuners in and out (and the remote dongle), swapping over the tuner cables. I have also tried each of the 3 HDMI cables on different HDMI ports on the IceBox. Can't think of any combination I may have missed.

Will see what IceTV say when I log it tomorrow. A USB update couldn't be much more difficult than building and administering a multi-tenant Azure environment :-)

Cheers,
Mike.
Title: Re: New IceBox - DOA?
Post by: nodyel on December 10, 2023, 07:50:36 PM
Hi MD,

I'll give it another try and leave the power off for longer. May not have been a minute between each change, but I did power off each time.

Cheers,

Mike.
Title: Re: New IceBox - DOA?
Post by: nodyel on December 10, 2023, 08:02:57 PM
Hmmm - just another thought - Is it worth opening it up and making sure the disk is properly seated? No sign of any impacts on the packaging or contents, but maybe vibration on its way from SYD to MEL?

Mike.
Title: Re: New IceBox - DOA?
Post by: MD on December 10, 2023, 08:15:02 PM
No harm in checking though the plugs are very tight.
Title: Re: New IceBox - DOA?
Post by: nodyel on December 10, 2023, 08:23:07 PM
Left the power off for a good 15 minutes and no difference. Tried giving the cables a bit of wriggle and no difference either.

Mike.
Title: Re: New IceBox - DOA?
Post by: nodyel on December 10, 2023, 08:46:18 PM
And lastly, I opened it up. Like you said, the connectors are fairly tight. Unplugged them and put them back (power off and unplugged of course). No difference.

Mike.
Title: Re: New IceBox - DOA?
Post by: Daniel Hall at IceTV on December 10, 2023, 09:20:37 PM
Hi Mike,

Are the HDMI cables rated for 4K content?

By default if a 4K TV is detected it will output 4K and I have seen this exact scenario happen with cables not rated for 4K with a no signal error after the boot screen logo.
Title: Re: New IceBox - DOA?
Post by: nodyel on December 10, 2023, 09:55:11 PM
Hi Daniel,

I couldn't be sure 100% now - I can't see any markings regarding being 4K compatible. Hmmm - I might duck out in the morning and grab one. I am pretty sure that I have purchased at least 1 4K rated one, but I am not sure if it is one of the one's I have now.

Will grab one and see what happens and report back.

Mike.

Quote from: Daniel Hall at IceTV on December 10, 2023, 09:20:37 PMHi Mike,

Are the HDMI cables rated for 4K content?

By default if a 4K TV is detected it will output 4K and I have seen this exact scenario happen with cables not rated for 4K with a no signal error after the boot screen logo.
Title: Re: New IceBox - DOA?
Post by: Daniel Hall at IceTV on December 11, 2023, 09:17:35 AM
Hi Mike,

I had so many HDMI cables laying around and it's very very hard to tell which ones are capable.

It's a shame too as for normal operation of the IceBox we actually recommend 1080p for stability and performance reasons, but by default it tries to go to 4K first so the cable does need to support it.
Title: Re: New IceBox - DOA?
Post by: IanL-S on December 11, 2023, 11:30:46 AM
Like Daniel, I have many HDMI cables lying around. I now label any 4K (or greater) cables that I buy so I have a good idea what I am using.

Hope you get this sorted out. But it is looking like you may have to resort to a USB installation of the latest firmware.
Title: Re: New IceBox - DOA?
Post by: raymondjpg on December 11, 2023, 11:51:02 AM
Is this IceBox connected to the internet?
Title: Re: New IceBox - DOA?
Post by: nodyel on December 11, 2023, 12:59:59 PM
Quote from: raymondjpg on December 11, 2023, 11:51:02 AMIs this IceBox connected to the internet?

Hi Raymond,

No, not on the internet yet - was planning on connecting it to wifi, but as I can't do any set up that hasn't been done.

Mike.
Title: Re: New IceBox - DOA?
Post by: nodyel on December 11, 2023, 01:07:02 PM
Okay, I ducked out and picked up a couple of cables (I will have another use for one of them anyway as i want to upgrade one of my monitors).

One is 1.2m rated for 4K @ 18Gbps, and the other is 2m and 8K @ 48Gbps.

Exactly the same result - logo appears for a few seconds, then blank screen for a little while, and then TV reports no signal.

Mike.
Title: Re: New IceBox - DOA?
Post by: raymondjpg on December 11, 2023, 03:07:51 PM
Quote from: nodyel on December 11, 2023, 12:59:59 PMNo, not on the internet yet - was planning on connecting it to wifi, but as I can't do any set up that hasn't been done.
The reason I ask is that all installations of the IceBox BYO that I have done so far have been on devices that have an already established connection to the internet. It is certainly needed somewhere in the routine to set up a connection with the IceTV servers.

I'd be trying to set up what is needed for a wifi connection in advance of booting up the IceBox i.e. ensuring that whatever router it will be connecting to is configured to accept it.
Title: Re: New IceBox - DOA?
Post by: Daniel Hall at IceTV on December 11, 2023, 03:08:52 PM
Hi Mike,

Does the light on the front of the IceBox go off at all, or just stay on all the time?

Does it flash after about 30 seconds or so?
Title: Re: New IceBox - DOA?
Post by: Daniel Hall at IceTV on December 11, 2023, 03:18:53 PM
The other thing to try is to reload the IceBox firmware.

You can use the instructions from the BYOB setup to create the installation media, these are found at https://support.icetv.com.au/hc/en-us/articles/6591367595407-IceBox-BYOB-Installation-Links
Title: Re: New IceBox - DOA?
Post by: nodyel on December 11, 2023, 04:01:00 PM
Hi Daniel,

As far as have noticed, no sign of any flashing - it just comes on and stays on. I just tried and it was solid for more than 5 minutes.

I'll give the reload a try.

Cheers,

Mike.
Title: Re: New IceBox - DOA?
Post by: nodyel on December 11, 2023, 05:51:52 PM
No luck with the reload.

First, I had a problems with the balenaEtcher program. It kept failing the validation phase at around 97%. Eventually I got a successful run after i turned of Windows autoplay, and setting the actions to take when a drive is inserted to 'take no action'. That let me get a successful run and I started testing.

Unfortunately, exactly the same result. I get the icetv logo, then the blank, then the 'no signal'. No sign of the front light flashing. I think I tried every usb socket, and with a fair mixture of the other external bits (tuners and dongle) being in or out.

Any other suggestions to try?

Mike.
Title: Re: New IceBox - DOA?
Post by: raymondjpg on December 11, 2023, 06:08:16 PM
Quote from: nodyel on December 11, 2023, 05:51:52 PMFirst, I had a problems with the balenaEtcher program.....

Any other suggestions to try?
Try Rufus?
Title: Re: New IceBox - DOA?
Post by: MD on December 11, 2023, 06:31:54 PM
Hi Mike,

This is excruciating and if you/we can't resolve it asap I'll send another.

Do you have a wireless keyboard so you can stop the IceBox at its BIOS screen so as to choose an option to force  it to boot onto the USB?
Title: Re: New IceBox - DOA?
Post by: raymondjpg on December 11, 2023, 09:28:15 PM
Quote from: nodyel on December 11, 2023, 05:51:52 PMAny other suggestions to try?
Are you by chance trying to install with an img file extracted from the gz archive?
Title: Re: New IceBox - DOA?
Post by: nodyel on December 11, 2023, 09:41:55 PM
Quote from: MD on December 11, 2023, 06:31:54 PMHi Mike,

This is excruciating and if you/we can't resolve it asap I'll send another.

Do you have a wireless keyboard so you can stop the IceBox at its BIOS screen so as to choose an option to force  it to boot onto the USB?

Hi,

Unfortunately I only have a bluetooth ones :-(. All my cable ones have long gone, and the ones that i did have that were wireless with a dongle have gone as well.

I could try and get out again tomorrow and pick up a cheap one. Will any keyboad dongle one work, or are they dependant on a particular driver? Would a usb connected keyboard work? I know that some of them have drivers/software that you 'need', but I think that is just to give extra 'fluff' to do extra things with them. Should any keyboard work, even with a dongle?

Mike.

Mike.
Title: Re: New IceBox - DOA?
Post by: nodyel on December 11, 2023, 09:45:17 PM
Quote from: raymondjpg on December 11, 2023, 09:28:15 PM
Quote from: nodyel on December 11, 2023, 05:51:52 PMAny other suggestions to try?
Are you by chance trying to install with an img file extracted from the gz archive?

No, I just downloaded the gz archive, and then told the balenaEtcher tool to use that to 'build' the usb contents. I didn't unarchive the gz file.

Mike.
Title: Re: New IceBox - DOA?
Post by: raymondjpg on December 11, 2023, 09:51:58 PM
Quote from: nodyel on December 11, 2023, 09:45:17 PMNo, I just downloaded the gz archive, and then told the balenaEtcher tool to use that to 'build' the usb contents. I didn't unarchive the gz file.
Yep. That should work.

I'm out of ideas I'm afraid.
Title: Re: New IceBox - DOA?
Post by: MD on December 11, 2023, 09:59:50 PM
The dongle needs to be matched to the keyboard so purchased as a pair, as is our remote (as best I know) but a wired usb one would work just as well, if they still exist.
Title: Re: New IceBox - DOA?
Post by: MD on December 11, 2023, 10:02:18 PM
Daniel or I will give you a call tomorrow to get to the bottom of the problem.  Are you an around all day?
Title: Re: New IceBox - DOA?
Post by: nodyel on December 12, 2023, 12:05:35 AM
Quote from: MD on December 11, 2023, 09:59:50 PMThe dongle needs to be matched to the keyboard so purchased as a pair, as is our remote (as best I know) but a wired usb one would work just as well, if they still exist.

I'll try and get down to JB or the like first thing in the morning and I should be available after that. Let's say sometine after 10am? The only firm commitment I have is that I am giving a customer some IT training between 1PM and 3PM, but allow 15 minutes before and after to set up and shut down. It's online training, so I don't have to go anywhere for it.

I'll send you a PM with my phone number in case you don't have it.

Mike.
Title: Re: New IceBox - DOA?
Post by: kazz on December 12, 2023, 06:13:53 AM
Quote from: nodyel on December 10, 2023, 06:48:40 PMTV is a Samsung UA65MU6100.


One more thing you could try, if your TV has an 8K HDMI input try that one.
I have a Samsung TV in the bedroom (not the same model), worked fine with the BW but I had dropout issues with the IceBox, tried different cables, including an 8K rated cable with no luck but once I swapped to the 8K input on the TV, bingo. I know it sounds weird, I think it's some sort of quirk with the Samsung.

This may not fix your issue but may be worth a try.  :)
Title: Re: New IceBox - DOA?
Post by: IanL-S on December 12, 2023, 07:29:19 AM
Not sure if it is relevant, but the way you are creating the installation USB stick may be playing a part. LibreELEC have a windows utility for doing this - see https://wiki.libreelec.tv/installation/create-media

Ian
Title: Re: New IceBox - DOA?
Post by: nodyel on December 12, 2023, 08:23:38 AM
Quote from: kazz on December 12, 2023, 06:13:53 AM
Quote from: nodyel on December 10, 2023, 06:48:40 PMTV is a Samsung UA65MU6100.


One more thing you could try, if your TV has an 8K HDMI input try that one.
I have a Samsung TV in the bedroom (not the same model), worked fine with the BW but I had dropout issues with the IceBox, tried different cables, including an 8K rated cable with no luck but once I swapped to the 8K input on the TV, bingo. I know it sounds weird, I think it's some sort of quirk with the Samsung.

This may not fix your issue but may be worth a try.  :)

This Samsung is only 4K. Thanks anyway.

Mike.
Title: Re: New IceBox - DOA?
Post by: nodyel on December 12, 2023, 08:25:23 AM
Quote from: IanL-S on December 12, 2023, 07:29:19 AMNot sure if it is relevant, but the way you are creating the installation USB stick may be playing a part. LibreELEC have a windows utility for doing this - see https://wiki.libreelec.tv/installation/create-media

Ian

I might give that a try when i get a chance.

Mike.
Title: Re: New IceBox - DOA?
Post by: MD on December 12, 2023, 09:48:15 AM
Hi Mike,

Daniel will call after 10. He's the technical expert so should be able to drill down to find out what is going on (or what's not!).
Title: Re: New IceBox - DOA?
Post by: nodyel on December 12, 2023, 01:00:43 PM
Hi All,

Thanks for the various responses!

All fixed now! Had Daniel call me this morning, after I purchased a keyboard.

First we hooked up the keyboard and managed to get into the bios. Whatever we tried resulted in no difference to the behavior - with either a normal boot or trying to do a re-install from usb. The bios entries all looked correct, with the correct devices showing.

We also tried a few setting on the TV to no avail.

Just about to give up when Daniel asked if I had a PC monitor with a HDMI input. Luckily I did, a 4K one I purchased last year.

So, i hooked that up and lo-and-behold worked like a charm!

Daniel then left me to continue with the set of the software and had no problems with that. Once that was done, Daniel also suggested that I set the resolution of the IceBox to 1080p. Did that and powered the box down. Reconnected everything back to the TV and works like a charm! :-)

The only slight problem I had was with IceTV. The documentation mentioned that it uses IceBox for the device name. So, I had in preparation for this, already renamed my device to IceBox as thinking it would pick that up and get my recording schedule. No, of course it created another IceBox entry. Wasn't to hard to work out which was which, so I just tranferred the recording schedule from one to the other, and deleted the now empty one, and all was well again.

I guess it it not a cable issue as I used the same cable to plug into the monitor. Only conclusion we came up with is that there is something 'funky'with the TV. I have watched plenety of stuff at 4K, so I don't that is the problem as such. Maybe it is an issue with the HDMI implementation. Dunno. Just happy it is working!
Thank you and especially Daniel for his time today.

Cheers,

Mike.
Title: Re: New IceBox - DOA?
Post by: Daniel Hall at IceTV on December 12, 2023, 01:28:20 PM
Hi Mike,

Awesome news.

I think the problem is something between a changing of resolution to an unsupported resolution/refresh rate of the TV that was attempted each time.
Title: Re: New IceBox - DOA?
Post by: raymondjpg on December 12, 2023, 02:01:22 PM
Quote from: nodyel on December 12, 2023, 01:00:43 PMI guess it it not a cable issue as I used the same cable to plug into the monitor. Only conclusion we came up with is that there is something 'funky'with the TV. I have watched plenety of stuff at 4K, so I don't that is the problem as such. Maybe it is an issue with the HDMI implementation.
Possibly similar issues to those reported for Beyonwiz boxes that can't cope with "enhanced HDMI" modes in 4K TVs. Solution is to turn such modes off, or use an HDMI input not configured as such.
Title: Re: New IceBox - DOA?
Post by: nodyel on December 12, 2023, 03:14:33 PM
Quote from: Daniel Hall at IceTV on December 12, 2023, 01:28:20 PMHi Mike,

Awesome news.

I think the problem is something between a changing of resolution to an unsupported resolution/refresh rate of the TV that was attempted each time.

Quite possibly. I will be using the box pretty well only for broadcast stuff (although I may use it for other things down the line) so just glad it is operational now :-)

Mike.