IceTV Forum

IceTV IceBox => Getting Help => Topic started by: Hati on March 21, 2024, 10:43:58 PM

Title: Loss of Channel 7 after firmware update
Post by: Hati on March 21, 2024, 10:43:58 PM
I guess better start a topic in this section.

As the title suggest, the latest firmware update went like a dream. No issues at all, as the label suggested.

Except for one thing. The automated channel scan failed to pick up all the 7 channels. Not one. Everything else is present though.

I have tried the Settings/General/Channels/Channel scan, gives me a "None of the connected PVR backends support scanning for channels". There is no way of rescanning at all.

I have also checked antenna connections to the three dual tuners I run. Of course this was a "because I can" job, no hardware was touched in the update process.

Reboots did not help either.

Recordings created before the update for Channel 7 stayed in place, but of course they wont record because I have no CH 7.

Of course this happens again when we are about to leave for a longish weekend from home...
Title: Re: Loss of Channel 7 after firmware update
Post by: MD on March 21, 2024, 10:49:06 PM
It's tedious but have you tried a software update when it will rescan its channels?
Title: Re: Loss of Channel 7 after firmware update
Post by: Hati on March 21, 2024, 11:02:47 PM
Quote from: MD on March 21, 2024, 10:49:06 PMIt's tedious but have you tried a software update when it will rescan its channels?

No, at the moment I was just manually adding the channels via TVheadend. It worked to a degree, but I can't get epg data  for them or a tuner to work with.

I'll see if I can dig up the manual update instructions...
Title: Re: Loss of Channel 7 after firmware update
Post by: Hati on March 21, 2024, 11:19:38 PM
Fixed, a soft reset helps from Settings/LibreELEC/System/Reset system settings to defaults.

It was a bit of a pain to go through the account setup and all that plus the menu customisation I did will need to be done again, but ultimately all channels are present now so it's a win.
Title: Re: Loss of Channel 7 after firmware update
Post by: IanL-S on March 22, 2024, 10:12:04 AM
Glad that you managed to get it sorted.

Cannot remember if I had similar problems when testing the new build. Did a lot at upgrade tests with various builds and it just becomes a blur.
Title: Re: Loss of Channel 7 after firmware update
Post by: Hati on March 22, 2024, 04:42:00 PM
Quote from: IanL-S on March 22, 2024, 10:12:04 AMit just becomes a blur.

Yep, I know the feeling. All good.