I have set up my IceTV on my NUC PC and after all channels have been scanned and downloaded I go to the guide where certain channels have disappeared and missing. I have done a soft reset and the same thing happens although different channels have disappeared in the guide. Can this be fixed?
I have not had this happen for a very long time.
The first thing to do is to confirm that the channels are in fact absent.
In your web browser open the TVHeadend page for your IceBox. You need the IP address of the IceBox. Assume that the IP address is 192.168.9.97, then open page:
http://192.168.9.97:9981/
You may get a warning that the web site is insecure, ignore it and open the web page.
The click on the configuration tab, and then Channels/EPG which brings up a listing of all TV and radio channels.
If they are all there, then the IceBox EPG has defaulted to a setting that does not show all channels; for example all HD channels or all Standard definition channels. This can be adjusted by the tabs at the top of the EPG.
Just to add - the IceBox intentionally copies only the EPG data that relates to the channels enabled in the users IceTV Guide Settings account. That is done to save unnecessary channels that won't function, except for on the IceBox itself, from being enabled and cluttering the IceBox EPG.
In your web browser open the TVHeadend page for your IceBox. You need the IP address of the IceBox. Assume that the IP address is 192.168.9.97, then open page:
http://192.168.9.97:9981/
************************************
I am unsure how to get to the instructions above. I opened the TVHeadend page and don't where to go from there.
The attached 3 screenshots shows the sequence of tabs to be selected. In the third screenshot (TVH_03.gif) the second column has a tick if EPG data is being set for that item. There is no tick for radio stations and shopping channels.
The third screenshot is not very clear, the one attached now makes it easier to see the column I mentioned in my prior post
Thank you for the screen shots. I have now had access. All channels have appeared apart for CH10 and it related channels. All these channels have not appeared. How can these be populated?
As an update, I did a soft reboot and now all channels are appearing except all CH9 channels. This is what has been continually happening each time I do a soft reboot. The channels that appear and don't appear are not consitant. During the soft reboot all channels are always recognised by the tuner. I have now spent 8 hours trying to get all the channels but to no avail.
I have tried the force channel reset but when I click on it nothing happens.
I really appreciate all the help I have received and has been quite valuable, however, after spending 8 hours so for to fix this issue I am close to giving up.
Hope someong can help?
This must be getting very frustrating for you. We had similar issues during beta testing. The IceTV team are aware of the problems you are having and you will hopefully hear from them shortly.
Hi Sancho,
For this one it would help to get the logs from your IceBox from just after the setup following a soft reset (if you haven't restarted the IceBox since the last soft reset then this will be fine as well) so we can have a look at the results of the channel mapping.
To get the logs from the IceBox, get the IP address of the IceBox by going into the settings (the cog icon on the main screen), then going across and selecting "System Information". On "Summary" tab write down the "IP address" (this will be referred to as IP_ADDRESS for the rest of this guide)
Then choose the steps for you depending if you are using a Windows PC or a Mac:
For a Windows PC:
1. Open the Run box by pressing the Windows and "R" keys together on the keyboard
2. In the Run box that comes up type in "\\IP_ADDRESS" (without the quotes, and put in the actual ip address that you wrote down above, for example "\\192.168.9.97"), then click on OK
3. If it comes up asking for a username and password then put in a username of just 'guest' and don't put anything in the password field.
4. On the list of folders that comes up go into the "Logfiles" folder and a new zip file will be created with the current date and time, copy that file and email it to us.
For a Mac:
1. Full details on this process is available on the Apple website at Connect your Mac to shared computers and servers
2. In the finder under the "Go" menu select "Connect to Server"
3. In the "Server Address" field type in "smb://IP_ADDRESS"
4. Click connect
5. Select to connect at "Guest"
6. Select the "Logfiles" share as the one to connect to
7. When the folder opens you will see a new zip file will be created with the current date and time, copy that file and email it to us.
You can email the logs to us on our support email address of support@icetv.com.au