Main Menu

PVR died need advice

Started by kgl, January 27, 2026, 02:46:41 PM

Previous topic - Next topic

kgl

Hi
My Beyondwiz U4 has/is dying. It is going through reboot cycles sometimes with movies listed and sometimes with no movies listed. I intend to remove the HDD and try to recover my recordings. If I can I will try a fresh install.

If I need to get another PVR what are my options?
The Icebox is delayed and who knows when it will come. I'm reluctant to "buy" one and then wait months for it to arrive with my money gone from my account.

I do have a very old hp laptop Elitebook Folio 9470m. Would this be suitable?
If so where can I download the software and I can't find any kit available for the tuners and remote.
TIA
Greg

MD


A couple of weeks ago we had a subscriber with a dead T4 who emailed NASA Electronics as they have closed down/he's retired and he did a repair as a favour so worth a go: nasaelectronics2017@gmail.com

IanL-S

Given the symptoms you describe I suspect that there is a problem with the HDD file system. You are already thinking of copying the recordings - you can do this using FTP, SAMBA to copy the recordings to PC/MAC. You could also try copying to USB HDD - you may need to use SAMBA to do that. You cold take the SSD\HDD out and copy the recordings directly to PC/MAC. Windows does not have native support for ext4 file system used by the Beyonwiz, but Paragon Software have a program that allows you to access drives formatted with ext4; you can use the trial installation to get the recordings.

Once you have salvaged the recordings, reformat the HDD/SSD which hopefully will fix the file system problem.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

kgl

Quote from: MD on January 27, 2026, 03:23:19 PMA couple of weeks ago we had a subscriber with a dead T4 who emailed NASA Electronics as they have closed down/he's retired and he did a repair as a favour so worth a go: nasaelectronics2017@gmail.com
Thanks for the tip. Unfortunately I did not get any reply to my email.

Quote from: IanL-S on January 27, 2026, 03:34:28 PMGiven the symptoms you describe I suspect that there is a problem with the HDD file system.

In the end I found a post on Whirlpool forums where somebody had similar issues and they found it was a faulty power brick. https://whrl.pl/RgTHPb

I bought a replacement today and everything seems to be working fine. Even with the original HDD.

Thanks everyone for your tips