IceTV Forum

IceTV General => General Discussions => Topic started by: xanthi on December 01, 2015, 03:22:57 PM

Title: Resend ...
Post by: xanthi on December 01, 2015, 03:22:57 PM
Had some funny entries in the T4 timers, e.g., waiting. No station information or anything, just "Waiting" Quite a few entries actually. So deleted most of the entries except for the top most one. Logged on to the IceTv site, went to my recorders and did a resend of the timers. That was over an hour ago. Now I have just one timer set for later this afternoon.

Are all my timers for the Beyonwiz T4 lost? Hope not.

And also have noticed that at times certain programs are recorded not by name but by date. Is that an error in both the T4 and T3 or is it something to do with IceTV

Cheers, xanthi
Title: Re: Resend ...
Post by: Dave at IceTV on December 01, 2015, 03:47:35 PM
You still have 44 series setup in your account. But 20 episodes for the next week have been cancelled. Your Beyonwiz told IceTV to cancel those episodes.

I've rescheduled those 20 episodes but only 9 new queued schedules appeared in my week, so the others may have duplicates or triplicates or old entries. PS those 9 are showing as scheduled now. Basically your missing schedules for Sat-Sun are back.
Title: Re: Resend ...
Post by: prl on December 01, 2015, 04:00:08 PM
Quote from: xanthi on December 01, 2015, 03:22:57 PM
Had some funny entries in the T4 timers, e.g., waiting. No station information or anything, just "Waiting" Quite a few entries actually. So deleted most of the entries except for the top most one. Logged on to the IceTv site, went to my recorders and did a resend of the timers. That was over an hour ago. Now I have just one timer set for later this afternoon.
Resending the timers in the IceTV Web just marks them to be resent. They only actually get sent when the Beyonwiz contacts IceTV for an update. You can force that with MENU>Plugins>IceTV>Fetch EPG and update timers.

But if you delete IceTV timers on the Beyonwiz, as Dave says, the timers get deleted on IceTV.

If you are now receiving Nine HD but timers set for Nine HD show their channel as blank or as Gem, that is a known bug with a probable fix already posted on the Beyonwiz forum. It's waiting for the person who looks after the Beyonwiz IceTV client and the Beyonwiz distributions to come back on board. I don't know exactly when that will be. Timers affected by this bug appear to record normally. There's more detail in Recordings on 9HD via IceTV show as GEM on Timers list on the Beyonwiz forum. This is a Beyonwiz firmware bug.

Quote from: xanthi on December 01, 2015, 03:22:57 PM...And also have noticed that at times certain programs are recorded not by name but by date. Is that an error in both the T4 and T3 or is it something to do with IceTV...

When an IceTV timer is created on the Beyonwiz it looks up the program's name the (IceTV) EPG as the timer's (and later, the recording's) name, but an empty title is being returned from the EPG. There have been reports of "holes" in some IceTV EPG data that may be the cause of this. I'm not certain, but this seems to be an IceTV problem. There has been some discussion of the missing EPG data here on the IceTV forum in IS ANYBODY FROM ICEV READING THIS? Missing epg data (http://forum.icetv.com.au/general-discussions/1/is-anybody-from-icev-reading-this-missing-epg-data/4747/) (and probably other topics).
Title: Re: Resend ...
Post by: tonymy01 on December 01, 2015, 04:06:54 PM
Quote from: xanthi on December 01, 2015, 03:22:57 PM
1:Are all my timers for the Beyonwiz T4 lost? Hope not.
2:And also have noticed that at times certain programs are recorded not by name but by date. Is that an error in both the T4 and T3 or is it something to do with IceTV
1: yeah, I have had this before too, was always fun around DST when you change the PVR clock by an hour and delete all the timers to get them resent, if the PVR tells ICEtv that the timers have been deleted, ICEtv will also delete them for the week from the server.   I did a different trick this year which worked, I pulled out the PVR network connection and deleted the incorrect timers, powered the PVR down then up, then plugged in the network connection and resent from ICEtv account settings.   This was for a P2, presumably it will behave similarly for the T4.
2: this is being discussed on teh Beyonwiz forums a bit here: http://www.beyonwiz.com.au/forum/viewtopic.php?f=55&t=9721  and a lot more here:  http://www.beyonwiz.com.au/forum/viewtopic.php?f=8&t=9827 and I am sure somewhere else.  It looks like something the guys there are still getting to the bottom of, hopefully soon we will know 100% the cause.   It is suggested the timers are sent with no names, and the Wiz, if it has EPG for that time at the time, will name the timer automatically.   But this is only a bit of a guess, the evidence being that some people are finding blank in the EPG also around the time that the timer is set for.   I have had it once for Fargo a few weeks ago.   Strangely I have seen more than one entry in the timer list that don't have names, but so far, only one recording without a name, so it does seem like the Wiz will eventually pick up a name for the timer (hmm, is it perhaps once you do a full restart rather than the quick standby?)
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 04:09:51 PM
Quote from: xanthi on December 01, 2015, 03:22:57 PM
Had some funny entries in the T4 timers, e.g., waiting. No station information or anything, just "Waiting" Quite a few entries actually. So deleted most of the entries except for the top most one. Logged on to the IceTv site, went to my recorders and did a resend of the timers. That was over an hour ago. Now I have just one timer set for later this afternoon.

Are all my timers for the Beyonwiz T4 lost? Hope not.

And also have noticed that at times certain programs are recorded not by name but by date. Is that an error in both the T4 and T3 or is it something to do with IceTV

Cheers, xanthi
Note that "Waiting" is the correct status for a timer. Obviously if the channel/date time data is missing that is a problem, but the status waiting is correct.
Title: Re: Resend ...
Post by: prl on December 01, 2015, 04:10:10 PM
Quote from: tonymy01 on December 01, 2015, 04:06:54 PM
...
1: yeah, I have had this before too, was always fun around DST ...   This was for a P2, presumably it will behave similarly for the T4.
...
It's not similar on the T4. The action to take at DST changeover on a T4 is ... nothing. As it should be.
Title: Re: Resend ...
Post by: tonymy01 on December 01, 2015, 04:16:05 PM
Quote from: prl on December 01, 2015, 04:10:10 PM
It's not similar on the T4. The action to take at DST changeover on a T4 is ... nothing. As it should be.
No, I didn't mean that part being similar, I meant the removal of a timer on the Wiz GUI will also remove it from the ICE server part.  The reason I did it that way this year rather than the known  P2 "clear all timers" menu option was I was too lazy to rebuild my wake-up timer, an realised I could do it a different way with the LAN pull.   Anyway, that is partially off topic, the topic is about clearing timers from the GUI clearing them from ICE.   
Just to add (and it has been somewhat mentioned anyway), the resend all timers does nothing if you have told ICE you don't want to record something this week.  You have to go into each show (that will now I think have a "grey" dot) and click the option "schedule new recording" as a one off (since you already have the weekly/series recording event setup but by deleting the timer, told ICEtv "I don't want to record that episode this week").
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 04:20:45 PM
Quote from: tonymy01 on December 01, 2015, 04:06:54 PM
It is suggested the timers are sent with no names, and the Wiz, if it has EPG for that time at the time, will name the timer automatically.   But this is only a bit of a guess, the evidence being that some people are finding blank in the EPG also around the time that the timer is set for.   I have had it once for Fargo a few weeks ago.   Strangely I have seen more than one entry in the timer list that don't have names, but so far, only one recording without a name, so it does seem like the Wiz will eventually pick up a name for the timer (hmm, is it perhaps once you do a full restart rather than the quick standby?)

I'm still looking at what might be causing it, but I have noticed that a reboot will cause the BW to populate the correct title assuming that the epg is properly populated. It is confusing because I have IceTV timers that have blank titles and corresponding blanks in the epg but I also have IceTV timers that have the correct title even though the epg is blank for those days.
Also, when I've had a blank section in the epg, I've managed to populate it by disabling and re-enabling IceTV.
Again, its not clear if the issue is relating to what is being sent from IceTV, or how it is managed when it arrives at the BW, or something about the interface software or how the plugin deals with certain changes/updates.

I am going to post something on the BW forum in the next few days once I have tried to understand what is happening.
Title: Re: Resend ...
Post by: Dave at IceTV on December 01, 2015, 04:24:33 PM
Quote from: tonymy01 on December 01, 2015, 04:16:05 PM
You have to go into each show (that will now I think have a "grey" dot) and click the option "schedule new recording" as a one off (since you already have the weekly/series recording event setup but by deleting the timer, told ICEtv "I don't want to record that episode this week").

From the website, you don't need to create a new single recording any more. In the TV Guide or My Week, when you click on a show with a grey icon there is a "Record this episode" link below the synopsys, where it gives the reason for that episode not being set to record.
Title: Re: Resend ...
Post by: prl on December 01, 2015, 04:39:33 PM
Quote from: tonymy01 on December 01, 2015, 04:06:54 PM... It is suggested the timers are sent with no names, and the Wiz, if it has EPG for that time at the time, will name the timer automatically.   But this is only a bit of a guess, the evidence being that some people are finding blank in the EPG also around the time that the timer is set for. ...
IceTV timers aren't sent with a name in them (or if they are, the IceTV plugin ignores it). When the timer is created, if the code creating the timer doesn't supply a timer name (as in the case with IceTV), the timer name (and description) is created by looking up the event in the EPG that matches the midpoint of the padded run time of the timer. If that fails to return a value, the timer will have no name, and its recording will show up listed by date and service name.

The evidence that the problem is caused by problems with the EPG is rather better than "a bit of a guess".
Title: Re: Resend ...
Post by: prl on December 01, 2015, 04:43:15 PM
Quote from: simoncasey on December 01, 2015, 04:20:45 PM
... I'm still looking at what might be causing it, but I have noticed that a reboot will cause the BW to populate the correct title assuming that the epg is properly populated. It is confusing because I have IceTV timers that have blank titles and corresponding blanks in the epg but I also have IceTV timers that have the correct title even though the epg is blank for those days. ...
The reboot will run a fetch from the IceTV server. If an update to an existing is sent, a new timer is created and it has another chance of looking up its name. That may or may not work. That means that this can both fix the timer's name or clear it, and that changes don't necessarily happen when the hole in the EPG data is filled.
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 04:52:49 PM
Quote from: prl on December 01, 2015, 04:43:15 PM
Quote from: simoncasey on December 01, 2015, 04:20:45 PM
... I'm still looking at what might be causing it, but I have noticed that a reboot will cause the BW to populate the correct title assuming that the epg is properly populated. It is confusing because I have IceTV timers that have blank titles and corresponding blanks in the epg but I also have IceTV timers that have the correct title even though the epg is blank for those days. ...
The reboot will run a fetch from the IceTV server. If an update to an existing is sent, a new timer is created and it has another chance of looking up its name. That may or may not work. That means that this can both fix the timer's name or clear it, and that changes don't necessarily happen when the hole in the EPG data is filled.
Rebooting does more than just a normal fetch. A normal fetch won't fill the empty title but a reboot does.
Title: Re: Resend ...
Post by: tonymy01 on December 01, 2015, 05:00:02 PM
Quote from: Dave at IceTV on December 01, 2015, 04:24:33 PM
when you click on a show with a grey icon there is a "Record this episode" link below the synopsys, where it gives the reason for that episode not being set to record.
Ahh yes, well so there is, isn't in quite the obvious place like the other 5 options with little icons in front though (but I shouldn't have missed it since it is literally the text proceeding the other recording options).
Title: Re: Resend ...
Post by: prl on December 01, 2015, 05:20:11 PM
Quote from: simoncasey on December 01, 2015, 04:52:49 PM
...
Rebooting does more than just a normal fetch.
Are you sure about that? I've looked at the code, and it doesn't look like that at all to me.

Quote from: simoncasey on December 01, 2015, 04:52:49 PM
A normal fetch won't fill the empty title but a reboot does.
I'm unconvinced. But I've never seen this problem, so it's hard for me to test it. Given the nature of the problem, it's hard to test anyway.
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 05:30:52 PM
Quote from: prl on December 01, 2015, 05:20:11 PM
Quote from: simoncasey on December 01, 2015, 04:52:49 PM
...
Rebooting does more than just a normal fetch.
Are you sure about that? I've looked at the code, and it doesn't look like that at all to me.

Quote from: simoncasey on December 01, 2015, 04:52:49 PM
A normal fetch won't fill the empty title but a reboot does.
I'm unconvinced. But I've never seen this problem, so it's hard for me to test it. Given the nature of the problem, it's hard to test anyway.

99% sure that a reboot will restore a missing timer title if that data exists in the epg. I did it yesterday. its why I know that if I have future timers with missing titles that thy will resolve themselves before the recording starts.
Title: Re: Resend ...
Post by: prl on December 01, 2015, 05:36:12 PM
I really can't see why that would be the case, except that if the T box goes into shutdown for a while, there's more chance that a timer change on the server will happen than if you see a problem and then do a resend.

Timers will only get a missing name filled in if the IceTV plugin gets an update for the timer and re-creates it. The IceTV plugin doesn't set the names for timers, except very indirectly by updating the EPG so that if the timer gets recreated, it might then get the correct name assigned to it. The IceTV plugin has no idea what the timer's name should be.
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 05:36:49 PM
Quote from: prl on December 01, 2015, 05:20:11 PM

I'm unconvinced. But I've never seen this problem, so it's hard for me to test it. Given the nature of the problem, it's hard to test anyway.
If you want to test it, set up a IceTV recording for little lunch (first runs and repeats) and for Live at the Apollo (first runs and repeats)

I currently have a blank timer for 9pm on Saturday 12th Dec (yes the 12th). I expect that sometime next week the epg for 12 Dec will get populated and then I will do a reboot and the title will appear.
I normally get at least 1 or 2 timers with no title for Little Lunch ~7am episode.
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 05:52:51 PM
Quote from: prl on December 01, 2015, 05:36:12 PM
I really can't see why that would be the case, except that if the T box goes into shutdown for a while, there's more chance that a timer change on the server will happen than if you see a problem and then do a resend.
No, its not a timing thing or triggered by a change on the server. I can quite easily reproduce it given the right situation.

On this subject, how do the IceTV timers get their names. I currently have approx. 10 IceTV timers that are beyond my displayed epg. this includes In the Flesh and Fargo 9th Dec, The Fall 10th Dec, and Heston's Feasts 13th Dec. All of these have titles even though there is no epg for those days. However, I have two that have no title. One seems to be Live at the Apollo on 12th Dec and I cant work out what the other one is for. Does the epg data actually exist on the T3 for the days where the timers have titles and the program guide only shows 7 days or are those titles assigned in a different way?

What tends to happen is that I do a reboot and go back into the timers and the ones with a blank title that are in the next 7 days have been corrected. The IceTV log doesn't show that anything was updated. It is much too much of a coincidence that IceTV people are waiting for me to reboot my T3 and then quickly the timers just to mess with my mind. This happens pretty much once a week, which is how often I end up rebooting. Its possible that a GUI restart is fixing it too as that happens a lot with the up/down arrow issue.

Sometimes, the titles don't get updated and a check of the epg shows a gap in the epg. In the past, I have thought this is an issue with IceTV not updating their epg properly and I think that has been a cause in some cases. However, I have also tried disabling IceTV to get a blank epg and then reenabling and doing a fetch and that has filled in the gaps in the epg (but didn't fix up the blank timer titles). A reboot of the T3 has then corrected the titles.

Is I possible that there is a function on the restart of the T3 that updates any blank timers to reflect the epg and is unrelated to the icetv plugin?
Title: Re: Resend ...
Post by: prl on December 01, 2015, 05:55:07 PM
Quote from: simoncasey on December 01, 2015, 05:36:49 PM
...
If you want to test it, set up a IceTV recording for little lunch (first runs and repeats)...
Strange. When I do that, the server side only shows the recording for Tomorrow Wed 2 Dec, but not for the other episodes (Thurs, Fri, Sun, Mon).

Only the Wed timer gets sent to the test T3. I'll give Live at the Apollo a go.
Title: Re: Resend ...
Post by: prl on December 01, 2015, 06:00:59 PM
Quote from: simoncasey on December 01, 2015, 05:52:51 PM
... On this subject, how do the IceTV timers get their names. ...
I've posted (http://forum.icetv.com.au/general-discussions/1/resend/4840/msg25271#msg25271) that right here in this topic.
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 06:01:42 PM
The Other show I have that is appearing with a blank timer is The Office (again a repeat) on Saturday 12th
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 06:03:23 PM
Quote from: prl on December 01, 2015, 06:00:59 PM
Quote from: simoncasey on December 01, 2015, 05:52:51 PM
... On this subject, how do the IceTV timers get their names. ...
I've posted (http://forum.icetv.com.au/general-discussions/1/resend/4840/msg25271#msg25271) that right here in this topic.
So how do I have IceTV timers with names beyond my epg, or is it that the epg data is actually there but the T3 only shows the next 7 days.
Title: Re: Resend ...
Post by: prl on December 01, 2015, 06:12:36 PM
 :o  :o

Scrub that. I don't know how I missed it, but the timer name is sent with the IceTV timer details and set from the IceTV plugin.

But the name of a timer will only be updated by IceTV if the timer is re-created by IceTV when the timer is updated because IceTV think it has changed.
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 06:16:28 PM
Quote from: prl on December 01, 2015, 06:12:36 PM

but the timer name is sent with the IceTV timer details and set from the IceTV plugin.

Did you mean to say "and not set" or do you mean that both do it
Title: Re: Resend ...
Post by: prl on December 01, 2015, 06:19:26 PM
Quote from: simoncasey on December 01, 2015, 06:16:28 PM
Quote from: prl on December 01, 2015, 06:12:36 PM

but the timer name is sent with the IceTV timer details and set from the IceTV plugin.

Did you mean to say "and not set" or do you mean that both do it
What I wrote is what I meant. The IceTV plugin in fact reads the timer name from what the IceTV server sends it, and the plugin uses that name when it creates the timer in the timer list.
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 06:22:36 PM
Quote from: prl on December 01, 2015, 06:19:26 PM
Quote from: simoncasey on December 01, 2015, 06:16:28 PM
Quote from: prl on December 01, 2015, 06:12:36 PM

but the timer name is sent with the IceTV timer details and set from the IceTV plugin.

Did you mean to say "and not set" or do you mean that both do it
What I wrote is what I meant. The IceTV plugin in fact reads the timer name from what the IceTV server sends it, and the plugin uses that name when it creates the timer in the timer list.
Sorry, read it as set and set not sent and set
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 06:25:20 PM
So that means that if we have blank titles in the IceTV timers, then it means the data isn't coming from IceTV in the first place and that doing a fetch etc wont fix it unless there has been an update to the timer by IceTV. But somehow, the T3 will update the blank title after a restart assuming that the data is in the epg.
Title: Re: Resend ...
Post by: JPP on December 01, 2015, 08:52:59 PM
Quote from: simoncasey on December 01, 2015, 05:52:51 PM

On this subject, how do the IceTV timers get their names. I currently have approx. 10 IceTV timers that are beyond my displayed epg. this includes In the Flesh and Fargo 9th Dec, The Fall 10th Dec, and Heston's Feasts 13th Dec. All of these have titles even though there is no epg for those days. However, I have two that have no title. One seems to be Live at the Apollo on 12th Dec and I cant work out what the other one is for. Does the epg data actually exist on the T3 for the days where the timers have titles and the program guide only shows 7 days or are those titles assigned in a different way?

What tends to happen is that I do a reboot and go back into the timers and the ones with a blank title that are in the next 7 days have been corrected. The IceTV log doesn't show that anything was updated. It is much too much of a coincidence that IceTV people are waiting for me to reboot my T3 and then quickly the timers just to mess with my mind. This happens pretty much once a week, which is how often I end up rebooting. Its possible that a GUI restart is fixing it too as that happens a lot with the up/down arrow issue.

I've been following this conversation - interesting...
I must be missing something, but how are you able to get timers from ICETV on your T2/3/4 more than 5 days ahead of the current date? It almost looks like you've set up an Auto timer in parallel with am ICETV timer. So far btw, I have not seen any of the blank title timers on my T2 if that helps.
Title: Re: Resend ...
Post by: simoncasey on December 01, 2015, 09:08:15 PM
Icetv just keep sending the timers. The 5 day limit thing doesn't apply to t series. I don't have any autotimers and in any case I have no epg out that far so there isn't anything for the autotimers to base the timers on.

Are you sure you don't have timers past 7 days on your t series. Most users seem to have a few, mainly on abc.
Title: Re: Resend ...
Post by: JPP on December 02, 2015, 12:05:47 AM
Ahh..., I see I still have a lot to learn about the T series Wizes. Just set up a recurring timer on ICETV for the 7.30 report and noticed that it now has timers set up to send right up till Tuesday next week, i.e. 7 days' worth of timers.

Edit - just checked the Wiz. It's now got timers set right up to Thursday next week. The ICETV web My Week only shows them set till Tuesday next week.
Title: Re: Resend ...
Post by: simoncasey on December 02, 2015, 09:23:50 AM
I've created a new topic to discuss the blank titles in timers as it is not really connected to the original topic http://forum.icetv.com.au/beyonwiz/17/blank-title-in-timer/4842/msg25309#msg25309
Title: Re: Resend ...
Post by: prl on December 02, 2015, 09:57:57 AM
IceTV will often set timers for SBS and ABC shows beyond the end of the EPG. When I looked last night, I had SBS Food Network timers set out to 12 Dec. It's been that way for quite a while (well before the demise of IceTV v1).
Title: Re: Resend ...
Post by: simoncasey on December 07, 2015, 12:59:54 PM
Quote from: simoncasey on December 01, 2015, 05:30:52 PM
Quote from: prl on December 01, 2015, 05:20:11 PM
Quote from: simoncasey on December 01, 2015, 04:52:49 PM
...
Rebooting does more than just a normal fetch.
Are you sure about that? I've looked at the code, and it doesn't look like that at all to me.

Quote from: simoncasey on December 01, 2015, 04:52:49 PM
A normal fetch won't fill the empty title but a reboot does.
I'm unconvinced. But I've never seen this problem, so it's hard for me to test it. Given the nature of the problem, it's hard to test anyway.

99% sure that a reboot will restore a missing timer title if that data exists in the epg. I did it yesterday. its why I know that if I have future timers with missing titles that thy will resolve themselves before the recording starts.
Just revisiting this from a while ago. I'm now pretty certain that restarting my T3 fixes up any timers with blank titles. In order to test it, I did the following:
I disabled icetv and reverted to the FTA epg to eliminate icetv updates from the issue. I then created a new timer on my T3 so that I had a non icetv timer. I then deleted the title from the timer so that it appears in the timer list as a timer with a blank title.
Then I did a GUI restart and when I looked at the timer, it had been assigned the correct title from the epg. So the fixing up of blank titles must be something that the T3 does on restart and explains why some people get the blank timers that result in blank recordings whereas others who shutdown or restart their T3s regularly will normally find the blank timers get fixed up.