IceTV Forum

IceTV General => General Discussions => Topic started by: stuice2 on November 04, 2010, 02:28:41 PM

Title: OneHD recordings keep scheduling to channel 73
Post by: stuice2 on November 04, 2010, 02:28:41 PM
I have noticed an issue recently on my Topfield 7100HDPVRT where I schedule recordings through ICETV for the F1 on One HD.  When the recording is sent to the Toppy it is set to use channel 73.  This has been happening for a few weeks now.  I then have to go in to the Timer settings on the Toppy and change the channel number.

Any thoughts?

Thanks,

Stu
Title: Re: OneHD recordings keep scheduling to channel 73
Post by: Lisey on November 10, 2010, 04:34:13 PM
Hi Stu,
I had the same problem for the last two weeks.

Go into the setting of Ice Tv and set the LCN (logical channel number) as the correct numbers.

That's fixed it for me.

lisey
Title: Re: OneHD recordings keep scheduling to channel 73
Post by: stuice2 on November 11, 2010, 04:04:09 PM
Thanks Lisey.

I just reset my Toppy to factory defaults and rescanned etc.  Then when the timers were sent down I was getting channel 2 sent as 7.  I have now changed all the LCN's within ICETV to see if this resolves the issue.

Stu
Title: Re: OneHD recordings keep scheduling to channel 73
Post by: Lisey on November 11, 2010, 04:43:08 PM
You may also need to clear out the Timer Recordings, and the resend them from the IceTV website link so they get sent down as the LCN numbers.
Otherwise old timer recordings are sitting there, when they record they will still stuff up numbers
I am guilty of this - it did a fetch between me clearing the timer recording, setting the LCNs and resending the recordings.
But all is great now
Good luck Stu