Main Menu

Icetv byo guide integration

Started by nathgreco, September 26, 2026, 08:40:14 AM

Previous topic - Next topic

nathgreco

My Icetv box hard drive died the other day id bought a Crucial 2Tb a few years ago to replace one supplied but those prices are to expensive to replace, so Ive built one from an old desktop pc, installed fine, it happily records and although big honking desktop pc doesn't look great in the lounge, it will do. the issue I'm facing now is the guide wont' come through, I've added my username and password to the icetv addon, I also tried using the instructions for the xml TvHeadend feed but still nothing. is someone able to walk me through what I'm doing wrong?

also once the guide is set up is there an easy way to assign recordings to the new device?

Thanks
Nathan

raymondjpg

#1
Edit: If you haven't done it already, try rebooting the BYO to see if that triggers an EPG download. If it doesn't, see below.

Quote from: nathgreco on September 26, 2026, 08:40:14 AMis someone able to walk me through what I'm doing wrong?
It should have all set up automatically with the install process. Try again by going into Settings>LibreELEC>System>Reset Icebox to defaults and follow the prompts. It should only proceed to completion if you enter your IceTV user name and password during the install process.

Quotealso once the guide is set up is there an easy way to assign recordings to the new device?
All being well the Icebox BYO should register itself automatically on My Recorders IceTV page as "IceBox" (unless you changed its name during the install process). Your original IceBox entry might still be there, also your first try with the Icebox BYO. You can rename them to distinguish one from another.

Once you have identified which are which, the procedure for setting timers will be the same as for IceBox. If the original IceBox entry is still there you could try transferring its timer entries to the BYO.

Whatever remote device you were using on IceBox should work on the BYO, bearing in mind that laser devices only work on line of sight or through reflected signals. Position receiving devices as best you can.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

nathgreco

Thankyou, the reset worked, the recordings still didn't come down but I managed sort it out,

for anyone encountering this issue

I managed to  find the " my recorders " in the Icetv my account menu , I noticed 2 icetv's listed.
to determine the New box I set a recording on the one listed at the top, once is trcoorded sucessfully I renamed the Bottom "icetv" to -old then i clicked copy timers to new recorder and followed the prompts

Thanks for the help 

raymondjpg

Quote from: nathgreco on September 28, 2026, 08:36:48 AMThankyou, the reset worked, the recordings still didn't come down but I managed sort it out,
Good to hear. You may want to keep the "old" recorder in your recorder list in case at some point you decide to resurrect your Icebox.

If you do that then you will need to ensure that you select the "new" recorder in the drop down list against "Device" on the IceTV web pages when using them to set timers or otherwise manage your BYO.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

Daniel Hall at IceTV

As you have copied all the timers across to the new BYO setup you can remove the older IceBox from the account now, if you do manage to get back onto the IceBox it will register itself and you can just copy the timers back to it like you have done to the BYO device.
Regards,

Daniel.
CTO.