Online Software Update just happened

Started by Doonks, October 16, 2026, 07:46:05 PM

Previous topic - Next topic

Doonks

About 3 days ago, I noticed the time on the front of my V2 box was stuck at 20:10. I change the source on my TV to the Beyonwiz, to find the spinner was on and rotating at super super slow pace. This has happened numerous times and results in any command from the remote being backed up and basically unworkable. You have to pull the power supply, and wait at least 5 minutes before plugging back in. I waited 3 days. 

So I've plugged it back in tonight,  or boots up, goes through the full scan and within minutes, up pops a full screen message advising that an "online software update" is available and do I want to update the device. 

Yes I do. 

I chose to back up the V2 first. That took about 10 minutes, then I started the online update. It took about 2-3 minutes and everything seems fine. 

I thought there would be no more updated available, ever, as the company has closed a while ago, and there is no server online any longer that my V2 would know to look for. 

So where has this update come from and who published it? Had anyone else had this happen? 

prl

Quote from: Doonks on October 16, 2026, 07:46:05 PMSo where has this update come from and who published it?

The update was to the channel picons to take into account gecent channel changes, like 10 HD+ and the SBS Viceland -> SBS2 branding change.

I created it, and adoxa published it on his feeds (you need to change your Beyonwiz's feeds configuration to access them), and peteru published it on the Beyonwiz feeds in the usual way. Adoxa has taken it off his feeds since the picons became available on the Beyonwiz feeds.

QuoteHad anyone else had this happen? 

The updates should be available to everyone who has a network-connected Beyonwiz and has online updates enabled (the default).

There are no updates to the firmware beyond the picons in the update.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

prl

Quote from: Doonks on October 16, 2026, 07:46:05 PMI chose to back up the V2 first. That took about 10 minutes

That doesn't sound right, if you mean the settings update that's suggested in the update procedure. That should normally take seconds, not minutes.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

prl

Quote from: Doonks on October 16, 2026, 07:46:05 PMAbout 3 days ago, I noticed the time on the front of my V2 box was stuck at 20:10. I change the source on my TV to the Beyonwiz, to find the spinner was on and rotating at super super slow pace.

The spinner appears when the user interface firmware hasn't been back to accept user inputs (remote, front panel buttons, keyboard, etc) for longer than a set time. It means that the firmware is busy on something that can't be interrupted. If the spinner stays on, it usually means that the firmware has got itself into an infinite loop. The only way out is, as, you say, to turn it off at the mains, wait a bit, then turn it back on.

It's odd that the spinner was running slower than normal, though.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing