IceTV Forum

IceTV Guide for IceTV enabled PVRs => Beyonwiz => Topic started by: bobbit84 on February 26, 2015, 12:02:14 AM

Title: IceTV update job error on T3
Post by: bobbit84 on February 26, 2015, 12:02:14 AM
Hey guys I am not sure if you can help but I setup my T3 for the first time a few nights ago and have been getting this error message fairly regularly since then. Has happened at least 6 times that I am aware of but may be more as when I get home from work I need to clear multiple error messages. Any light you can shed on the cause would be greatly appreciated.
Title: Re: IceTV update job error on T3
Post by: Dave at IceTV on February 26, 2015, 01:03:09 PM
Make sure that you have the latest software installed on your T3. The IceTV plugin menu should show November 2014 (or February 2015 if you are running the latest public beta).

Minor or incremental updates can be done via the package update menu on the T3 - but Major updates cannot, so the menu may say that there's no update available when there is.
Major version updates have to be done via a USB stick  - you need to manually download the update and unpack or unzip it and copy the 'beyonwiz' folder onto a USB stick.

You can backup your settings, from the setup menu, before doing the USB update  (the USB update will reset the T3). After doing the USB update the T3 will ask if you want to restore your backed up settings (or you can restore them from the setup menu).

Firmware image 4.3 (27 Nov 2014)
http://www.beyonwiz.com.au/phpbb2/viewtopic.php?f=45&t=8614&sid=273e92c733d0902a507abb37f61bd9a9

Title: Re: IceTV update job error on T3
Post by: bobbit84 on February 26, 2015, 10:23:05 PM
Thanks for the assistance that did the job!!  :)