IceTV Forum

IceTV Guide for IceTV enabled PVRs => Beyonwiz => Topic started by: gez737 on May 26, 2025, 09:24:34 AM

Title: Beyonwiz v2 menu randomly displays
Post by: gez737 on May 26, 2025, 09:24:34 AM
Hi Crew,

I have an existing Beyonwix V2, but of late, it randomly displays a Power/Restart menu (see photo attached). To get rid of it, I need to reboot, and then leave PVR allow for a period before I can access the recorded programs list or access the Guide. Very Strange.
All seems good, then it repeats. Have you seen this happen or any ideas of how to fix.

Cheers
Gerard
Title: Re: Beyonwiz v2 menu randomly displays
Post by: IanL-S on May 26, 2025, 11:49:17 AM
Not something I have seen, either on the V2 or my other Beyonwiz (U4 and T2). Are timers still being recorded on schedule, or is it preventing them recording? Peter (@prl) hopefully can help you sort this out.
Title: Re: Beyonwiz v2 menu randomly displays
Post by: gez737 on May 26, 2025, 06:08:58 PM
Hi Ian,
Yes timers are still recording as normal (set via Ice TV App/website).
Cheers
Gerard
Title: Re: Beyonwiz v2 menu randomly displays
Post by: prl on May 27, 2025, 11:38:51 AM
I'd suggest reloading the firmware from USB. Do a settings save before and a settings restore afterwards.

If that doesn't help, what are MENU>Setup>System>Button settings>Action on short POWER and Action on long POWER set to?

If the firmware reload doesn't work, try putting the remote in a box while it's not being used and see whether the problem goes away (I'm not suggesting that as a solution).
Title: Re: Beyonwiz v2 menu randomly displays
Post by: IanL-S on May 27, 2025, 11:56:37 AM
You can download the latest V2 firmware for here: https://www.dropbox.com/scl/fi/65gdijluoj4wzi2pwo6r3/beyonwiz-19.3-beyonwizv2-20211010_usb.zip?rlkey=9ik82fjkt30u816sa1t5rfkli&dl=0

Please let me know if the link does not work.

Ian
Title: Re: Beyonwiz v2 menu randomly displays
Post by: gez737 on May 30, 2025, 07:51:20 PM
Hi Ian,
I am haven't done the firmware option yet, but will attempt in the next couple of day...
I did take a photo re Button settings menu - see attached.
Will report back re firmware.
Cheers
Gerard
Title: Re: Beyonwiz v2 menu randomly displays
Post by: prl on June 01, 2025, 04:24:20 PM
OK, that would seem to rule out a single STOP code from the remote causing the problem.

I can't work out why that power screen doesn't accept remote button presses.

A long shot, but are there any active power timers in MENU>Power>Power Timers?
Title: Re: Beyonwiz v2 menu randomly displays
Post by: gez737 on June 04, 2025, 06:50:45 AM
Hi Ian, See attached photo of Power Timers.

I went to do firmware reload - but couldnt work out how to do it?? How do you do this?

I saved the saettings and then I did a facotry reset (instead - I though, why not, can't hurt!) and then it prompoted me to load the settings back in, which it did.

This was last night and none of the symptons re appeared. I will monitor and report back.

thanks again for your help.
Cheers
Gerard
Title: Re: Beyonwiz v2 menu randomly displays
Post by: IanL-S on June 04, 2025, 07:31:24 AM
Firmware installation process is not uniform for Beyonwiz. My recollection is that the V2 is relatively simple. Do not have the information handy, will need to search for it after I get back from the Gym.
Title: Re: Beyonwiz v2 menu randomly displays
Post by: IanL-S on June 04, 2025, 01:12:28 PM
Cannot find either a firmware update sheet (I have them for T2 and U4), and it is not dealt with in the user guide. However I found YouTube video
which may be all you need to understand the process.

Ian
Title: Re: Beyonwiz v2 menu randomly displays
Post by: gez737 on July 01, 2025, 12:24:48 PM
Hi Ian,
Just an update on how I went.
I did the firmware update, using the one you provided via the Dropbox Link and that worked well. As I was connected to the internet, it automatcially found an update of the firmwware and I updated to this. SHOULD i have done this?
Anyway, the problem still existed....argh....
However the last couple of weeks (touch wood), it's been fine and the Power Timers screen does not display. I have not turned it into Stand By Mode and I was wondering if this is the fix? Just leave it on?

THanks for all your advise thus far.
Cheers
Gerard
Title: Re: Beyonwiz v2 menu randomly displays
Post by: prl on July 02, 2025, 10:12:18 AM
There isn't a lot of difference between fully running and standby. In standby, the A/V outputs are switched off, the timeshift recording is stopped, and if that results in the HDD not being written to, the HDD will spin  down after about 5 minutes (configurable) of inactivity.