I wonder if any of you can give me some hope!! I think my V2 has died! Back story is, I have recently purchased a new computer with W11. I had been trying (unsuccessfully) to mount the Shares between it and the V2. So in this troubleshooting process, I had been rebooting quite often. During this, the booting process got slower and slower. Then it seemed to get stuck at around 75%, and later at 39%. Until it now fails to boot at all. Display just says Boot, but nothing happens. So do you think all hope is lost? I was disappointed to read that NASA has closed because I had thought I would send it off there. If you think that it may be a fixable issue, I thought I would just ring around some electronic people locally to see if they could at least have a look and see if there was anything obvious and fixable.
I have dusted off my old DP-P1, but it certainly makes you appreciate just how good the V2 was!! I am struggling with withdrawal!! If all is lost, I was going to get an Icebox, but they are not currently available unfortunately.
Quote from: Jan on May 20, 2026, 03:56:27 PMI was going to get an Icebox, but they are not currently available unfortunately.
If you have a spare PC lying around you could maybe set up an IceBox BYO, but not everyone has one of those.
Quote from: raymondjpg on May 20, 2026, 04:08:12 PMIf you have a spare PC lying around you could maybe set up an IceBox BYO, but not everyone has one of those.
I actually went to have a look at that option to see what was involved, but the link doesn't work!
Quote from: Jan on May 20, 2026, 04:46:56 PMI actually went to have a look at that option to see what was involved, but the link doesn't work!
This link is working for me:
https://support.icetv.com.au/hc/en-us/articles/6591367595407-IceBox-BYOB-Installation-Links#h_01GVPCBVKQDQSW6PKWS1EB9Y9B
Quote from: raymondjpg on May 20, 2026, 04:55:36 PMThis link is working for me:
https://support.icetv.com.au/hc/en-us/articles/6591367595407-IceBox-BYOB-Installation-Links#h_01GVPCBVKQDQSW6PKWS1EB9Y9B
Thank you! I was using the link from the store!
But further to my V2 issues, I just had a thought that maybe the firmware was corrupted and I could try re-installing. I got as far as the tv screen giving me the recovery menu. However I wasn't able to move through them to select Recovery by USB. Tried on three remotes - original V2, Universal and TV, so that wasn't the issue. I was actually quite excited when I was able to get that far, then came crashing down again!! Any more thoughts?
Apologists for the broken link. It will be fixed tomorrow although thanks to raymondjpt he's given you a different way in.
Quote from: MD on May 20, 2026, 06:07:23 PMApologists for the broken link. It will be fixed tomorrow although thanks to raymondjpt he's given you a different way in.
No worries!! Are you able to give me any idea when the Icebox may be available again?
Quote from: Jan on May 20, 2026, 05:55:43 PMHowever I wasn't able to move through them to select Recovery by USB. Tried on three remotes - original V2, Universal and TV, so that wasn't the issue. I was actually quite excited when I was able to get that far, then came crashing down again!! Any more thoughts?
I think you need someone better qualified than I to troubleshoot a Beyonwiz PVR, However, one thought: are there arrow keys on the front of the V2 for menu selection? I know that there is a step in T2 installation that calls for pressing he UP arrow on the front of the PVR, not on the remote.
Quote from: raymondjpg on May 20, 2026, 06:26:51 PMI think you need someone better qualified than I to troubleshoot a Beyonwiz PVR, However, one thought: are there arrow keys on the front of the V2 for menu selection? I know that there is a step in T2 installation that calls for pressing he UP arrow on the front of the PVR, not on the remote.
No, it's pretty much just a power button. Thanks for the suggestion anyway! :)
Unfortunately the V2 has no buttons on the front. You could try attaching a USB keyboard to one of the USB ports and seeing if you can use the UP and DOWN keys to navigate.
Looking at the V2 (draft) User manual, I see that there is a Recovery button on the back of the V2 which is described as "Recovery: Recover to factory settings if menu inaccessible".
Link to image of V2 rear pannel: https://www.dropbox.com/scl/fi/qpfp6tyzjfnh1tzfcrm37/V2-recovery-button.jpg?rlkey=k2gylc57nnefbxokd9hllr27i&dl=0