Topics

Hi Everyone,

Due to recent bot activity we have had to make some changes to the forum location (and were not able to just redirect everyone across).

Please update your favourites to point to https://forum.icetv.com.au/ from here on out. All links into the forum have been updated, but please let us know if you find one that hasn't been.

We are pleased to announce the release of version 12.1.1 of the IceBox firmware.

Some of the notable improvements are:

• Built on Libreelec version 12.0.1
• TVHeadEnd recording software updated
• Automatic Commercial Detection software updated
• New wireless management software to help with some wireless stability some members have experienced
• Multiple fixes for IceTV updates stopping unexpectedly
• Pre and Post padding can now be set via the IceTV Add On Settings (if the settings are blank when you first look they will be set to the default of 3 mins for pre padding and 30 mins for post padding)
• Fixed so that the IceBox hard drive will not run out of space, the oldest recording will be deleted to ensure that 5GB of space always remains available

It will download and auto install on your Icebox's and should already be on your machine waiting to be installed. To have the update applied simply press the power button on your remote control and select "Reboot" from the menu that comes up, as the IceBox reboots it will apply the new firmware.

You can check the version number by going into "Settings" then into "LibreELEC" and on the "About" tab on the left the Version number will be listed. After the upgrade is complete it will be 12.1.1.

If after you reboot the IceBox you are not on 12.1.1 give the IceBox a couple of hours to download the update and try rebooting again. Please note it can take up to 24 hours for the IceBox to check if a new firmware is available. If it still hasn't applied, you can follow the manual update instructions at https://support.icetv.com.au/hc/en-us/articles/9590018569103-Manually-Upgrading-the-IceBox-Firmware

We have a new firmware update available for the IceBox that is recommended for all users.

We have worked long and hard on this release to ensure that a soft reset is not required as part of the upgrade, however if you do experience issues after the upgrade then we would recommend performing a 'soft reset' using the procedure at How do I reset the network or IceBox or rescan channels?

This firmware has the following updates:

• All new firmware based on version 11.0.6 of the LibreELEC operating system with lots of stability and performance improvements.
• Massive overhaul of IceBox's timer handling to ensure you never miss your scheduled recordings.
• We have changed the format of recorded shows to ensure that subtitles (closed captions) are now available on recordings. This will apply only to newly recorded shows.
• Timeshift has been enabled to allow for automatic rewinding of live tv.
• AutoSkip has been added to this firmware, so when possible commercials will be automatically detected and then skipped during playback. This will apply only to newly recorded shows.

NOTE: If doing an upgrade subtitles will be enabled by default on all recordings (after performing a soft reset it will default to off). To change this:

• Start watching a previously recorded show then press the "OK" button on the remote control.
• Go across to the "Subtitles" option along the menu at the bottom of the screen (it's the second last option) and select it by pressing the "OK" button on the remote control.
• Change the setting to off for "Enable subtitles", then scroll down to "Set as default for all media" and press the "OK" button on the remote control.
• It will ask you confirm the change, select "Yes".
• Go across to the "Close" button on the right of the window, then press the "OK" button on the remote control.

Automatic commercial detection is enabled by default on this firmware. If you wish to disable it, please follow these steps:

• On the home screen of the IceBox if you go down to "Add-ons".
• Then go across to the big "IceTV" logo and press the "OK" button on the remote control.
• On the settings screen select "Automatic Commercial Detection" to disable it.
• Go across to the "OK" button on the right hand side, then when highlighted press the "OK" button on the remote control.

The update to this firmware is almost completely automatic, the IceBox checks with our servers for a new release and will download it automatically for you.

Once it has downloaded you will get a notification in the top right hand corner of the screen that advises that an update is available.

When you see this message all you need to do to apply the firmware update is to reboot the IceBox.

Press the power button on the remote control and a menu will come up for "Power Options", go down to "Reboot" and press the "OK" button on the remote control.

The IceBox will reboot twice, after the first reboot you will see some text on the screen as the update is applied, then it will reboot again into the new IceBox firmware. You will know the process is complete once the normal IceBox home screen is shown.

The first time the new firmware loads a migration of your settings will occur, this will include a re-scan of channels, this is all automatic and you will be updated on the progress through it. Once the migration is complete your IceBox will reboot one last time.

Hi Everyone,

We are in the process of testing a couple of new features in IceTV's scheduling system and would like some beta testers to check it out.

The update to our scheduler is focusing on two specific aspects, these are:

• Not recording multiple airings of the same episode
• Automatically moving timer conflicts to available airings to try and eliminate missed recordings

Just reply to this thread if you are interested.

As a heads up we have updated our forum spam checking, hopefully this will help with the recent spammy posts.

This topic has been moved to Plex.

http://forum.icetv.com.au/index.php?topic=6170.0

One of things we are seeing come up regularly is that in regional areas there are commonly a couple of channels that have the same LCN, while normally this is not a problem Plex will ignore any channels with a duplicate LCN.

The good news is there an easy fix for this, on the Guide Settings tab in the My Account menu on the IceTV website you can modify the list of channels that is downloaded by Plex, or limit which LCN's are sent for each channel, if you change these settings and click on Save then just refresh the guide within Plex you should see the updated channel list immediately.

This topic has been moved to Topfield.

http://forum.icetv.com.au/index.php?topic=5023.0

Hi Everyone,

We are please to announce that we have just released the documentation for the IceTV EPG and Smart Recording API.

With this documentation it is possible for PVR projects to be able to integrate into IceTV's EPG and Smart Recording service.

To be able to utilize the service an application developer will need to be apply for a developer key, this can be done by emailing developer@icetv.com.au (this is detailed in the documentation).

The documentation can be found at http://developer.icetv.com.au/

With the launch of new channels (TEN HD, 7flix, along with 9Life and 9HD in NBN areas) we need to get the DVB Triplets for these channels so the guide information can be mapped correctly.

We need the following information for each channel in each region:

TSID
ONID
SID
Channel Name
Region

To get these id numbers for each of these channels on the Beyonwiz T2/T3/T4 units:

- First you will need to make sure that you are in Intermediate or Expert mode.
  - In T4, T2 and recent T3 software versions go to 'Menu > System > GUI Settings' and change the 'Setup Mode' to Expert.
  - In older T3 software versions go to 'Menu > System > OSD Settings' and change the 'GUI Mode' to Expert.

Now you are ready to write down the TSID, ONID and SID numbers.

1. Change channel to one of those channels that has no IceTV guide data.
2. Exit any menus, EPGs and guides etc. i.e. Go to live TV.
3. Go to 'Menu > Information > Service'.
4. Once you are in the 'Information > Service' menu, press the Green button.
5. Now note the TSID, ONID and SID details shown for this channel.

Repeat steps 1 to 5 for all other affected channels, and reply to this thread with the details.

To get these id numbers for each of these channels on the SKIPPA units:

1. Press Menu.
2. Select Settings and press OK.
3. Select Channels and press OK.
4. Select one of the affected channels and press the Yellow button.
5. Write down the Frequency MHz.
6. Write down the Triple including the colons.
7. Repeat steps 4 to 6 for the other affected channels.

Reply to this thread with the channel name, number, frequency and triple numbers (on 1 line per channel).

For example:

9 - Nine Sydney - 191.67 MHz - 4114:1056:1057
99 - GO! - 191.67 MHz - 4114:1056:1059

We will update this thread as these channels go live for IceTV in each of these regions.

IceTV support will be closed over the Christmas break this year.

We will be closed from the 25th December 2015 through to the 4th of January 2016.

Normal support operations will resume on the 5th of January 2016.

From all of us at IceTV we wish you all a safe and Merry Christmas and a Happy New Year.

This topic has been moved to IceTV EPG Content.

http://forum.icetv.com.au/index.php?topic=4866.0

[What does this mean to me?]

Tonight IceTV will be performing scheduled maintenance on it's servers between Midnight tonight (22/10/2015) and 6am tomorrow (23/10/2015). We will be moving them to new hardware which will also involve changes to our DNS setup.

What does this mean to me?

During the maintenance window the IceTV service will be unavailable. Also as this includes a DNS change depending on your Internet Service Provider it might take between 24 to 48 hours to come back.

Is there anything I should do to prepare for this?

Any last minute scheduling of shows should be performed this evening before midnight for the next 24 to 48 hours if you have not already.

This is the current known issues list for firmware version 1.1.10600:

• Updates to IceTV's server can stop occurring (fix is being tested now)
• When in standby on some machines the clock on the front display doesn't update (fix is being tested now)
• On some machines after a period of time new recordings will not start (fix is being tested now)
• Purple screen visible when in standby
• Specific combinations of Wireless access points and SKIPPA cannot achieve a connection
• Out of memory error experienced when using HbbTV or Opera TV Store

The following fixes are in firmware 1.1.10600 (which is now available as an online update):

• Fixed sort function on My Recordings screen when recordings are grouped
• Fixed Series Recordings disappearing when no airings of the series are in the coming week
• Fixed issue where My Recordings screen would not always update on open
• Fixed where restarting the PVR could lose the last recorded show

This will be a list of known issues for firmware version 1.1.10579

• When recordings are grouped by folders then sort function doesn't work (fix is being tested now).
• When setting a series recording and there are no showings in the coming week, that series recording will be deleted (fix is being tested now).
• Opening the My Recordings screen doesn't always refresh the information shown, a workaround is available by pressing the back button then going back into the list of recordings (fix is being tested now).
• When in standby on some machines the clock on the front display doesn't update
• IceTV EPG and timer updates can stop occurring

The following fixes are in firmware 1.1.10579:

• Changes on Menu secreen, search, EPG and channels (settings) screens
• Fixed clock/time sync issues
• Fixed EPG and timers update frequency
• Show more metadata on TV Guide screen, recorded shows screen, and iPlate

This topic has been moved to IceTV EPG Content.

http://forum.icetv.com.au/index.php?topic=4540.0

This topic has been moved to SKIPPA.

http://forum.icetv.com.au/index.php?topic=3886.0

Australian technology journalists Alex Kidman and Adam Turner channel-surf through the headlines in search of the big picture. Includes technology news, reviews and opinions. View the latest episode now. http://youtu.be/qC70lo2UxtY

Find them on Facebook at http://www.facebook.com/VerticalHoldAU or via their channel http://www.youtube.com/channel/UCWUe4Xy5MxW6wsC8B_5xGFw