Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - gerhardp

#1
BYOB / Re: Lan file transfer speed
September 18, 2026, 02:16:08 PM
Further update - I unplugged the wall patch leads and tested the in wall cable - no issues.  Plugged it back together and am now getting 110mbps on the HP Intel NIC.

So I am giving up and making no more changes to any settings!  All is running as it should.

Thanks again for help.
#2
BYOB / Re: Lan file transfer speed
September 18, 2026, 01:20:01 PM
Quote from: raymondjpg on September 18, 2026, 12:56:52 PM
Quote from: IanL-S on September 18, 2026, 11:49:51 AMThanks for the additional information. I found a post on the LibreELEC forum which gives some backgrpund:
https://forum.libreelec.tv/thread/25007-2-5-gbit-s-ethernet-adapter-for-libreelec/

The problem may be solved if/when the next buid of IceTV is released - it seems Linux kernal 7.1 may be need for better support for 2.5Gbit.
I looked into that but as far as I could establish the HP Prodesk 600 I3-8100 has an Intel I219-LM GbE 10/100/1000 Mbps (Gigabit Ethernet) connection. I could understand potential for issues if it were a Realtek LAN port (showing my prejudice there) but it looks more like it comes down to a hardware or wiring issue between the HP, switch(es) and Windows PC.

Thanks, seems you missed my last post where I confirm an in wall cable issue. :)
#3
BYOB / Re: Lan file transfer speed
September 18, 2026, 12:46:21 PM
Update - the problem is in my wall cable.  I suspect some rodent chewage.  I plugged the switch to which the Prodesk is connected to the IW7 port (easiest one to access) and am getting 90mbps through a USB dongle.  The onboard HP port is 100mbps.

Thanks for the help.
#4
BYOB / Re: Lan file transfer speed
September 18, 2026, 12:24:50 PM
Quote from: IanL-S on September 18, 2026, 11:49:51 AMThanks for the additional information. I found a post on the LibreELEC forum which gives some backgrpund:
https://forum.libreelec.tv/thread/25007-2-5-gbit-s-ethernet-adapter-for-libreelec/

The problem may be solved if/when the next buid of IceTV is released - it seems Linux kernal 7.1 may be need for better support for 2.5Gbit.


Thanks for that.  I just connected via the onboard 1Gb NIC and if anything transfer speed was a bit slower.

So then I plugged in an old usb AC600 wifi adapter (Unifi IW7) and now getting 30Mbps transfer.  Found a USB 8156 in the stash and tried that one -  no good either, 8mbps. 

Have to investigate my in-wall cable, starting to suspect that is chewed......it's pretty old, but should still be good enough for gigabit.
#5
BYOB / Re: Lan file transfer speed
September 18, 2026, 10:37:55 AM
Quote from: IanL-S on September 17, 2026, 08:52:40 PMI have not seen trasfer speeds that slow on either of my BYOB. My BYOB are Intel NUC with (presumably) an Intel one. Whatever it is it give srsfer speeds that are in the regioun of 90 Mbps. However my preproduction IceTV Ice Box has been giving similar speeds to those you are seeing.

Have not thought about adjusting the settings in either KODI or Libreelec. I am running a beta installation, but the LibreELEC build is that in the public firmware, only the IceTV add-on (and possibly the TVHeadend add-on) are different. But that should not impact of network performance.

Have you checked the BIOS settings for the NIC? There may be someting there that is causing the slow speed. Just rembebers that I was going to try a different Ethernet cable - the cable could be damaged or not up to specification. Another possibilityis that the KODI/Libreelec NIC driver is suboptimal, particularly if it is an HP rather than the ones usually found in PCs (Intel, Killer etc).

I'm using a 2.5Gb NIC in the Prodesk, connected to a 2.5Gb switch, which is connected to the 1Gb main switch.  I will try connecting to the HP NIC as your suggestion that the Libreelec driver isn't up to par sounds playsible.
#6
BYOB / Re: Lan file transfer speed
September 18, 2026, 10:35:00 AM
Quote from: raymondjpg on September 18, 2026, 09:59:32 AM
Quote from: gerhardp on September 17, 2026, 04:55:32 PMAll working nicely, except transferring files from my Windows PC is practically comatose - around 8-9mbps transfer speed.  Network is Gigabit.
Is it possible that there is  a problem with you Windows PC's LAN performance, rather than your HP Prodesk?

No
#7
BYOB / Lan file transfer speed
September 17, 2026, 04:55:32 PM
I have used an HP Prodesk 600 I3-8100 box and installed ICETV on it.  I have 3 XBOX One tuners, Flirc USB, Sofabaton remote.  All working nicely, except transferring files from my Windows PC is practically comatose - around 8-9mbps transfer speed.  Network is Gigabit.

I have tried numerous settings like cache, special advancedsettings.xml file, etc with no success.  What's confusing me a bit is there are network service settings in Libreelec and also in Kodi - do these have to be synchronised perfectly or does Samba only rely on Libreelec settings?

It's not a huge thing but should be fixable. Lots of confusing things on google searching.
#8
Any updates on this?