Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - kruzenvax

#1
Beyonwiz / Re: Blank title in timer
December 12, 2015, 09:49:02 PM
OK, some more info from the latest occurrence today. Noticed an empty timer Channel 10 next Friday  (the 18th) afternoon - 3pm Judge Judy. When to EPG and the program info is not there. E.g. all channels seem to be ok but Channel 10 had a long empty bar for everything after midday.

Waited for an hour to ensure that EPG updates cycle does not fix it and Rebooted Beyonwiz. Now all  the info for Friday after midday is there, but timer is still empty. Tried to play with IceTV plugin (refresh, enable/disable) to get it refreshed and also rebooted T4 again - no luck.

So I think what's going on is:

1. Sometimes EPG info is not populated from IceTV. Not sure it's IceTV or T4 problems though I think I've seen some empty bars when I was using Humax
2. If at that time T4 rolls over the next timer it will naturally have not title and other fields (not sure if it will record or not, last time it dd not record)
3. Once EPG is updated (at least with reboot as it has been suggested here before) timer does not get updated and there is no apparent way to refresh it.

Hope the info above can help with fixing this issue - and hoe someone is looking into it.

Thanks

P.S. I have disabled deep standby timers - these days my T4 goes normal stand by only.
#2
Beyonwiz / Re: Blank title in timer
December 08, 2015, 07:46:11 AM
When I turn it off (Harmony 650) it goes to normal stand by. I have a sleep timer that puts it in deep standby (blue light only on the panel) after 30 minutes of inactivity  in normal stand by. So most of the day (when nobody is home) including 3 pm the unit spends in deep standby.

Does this answer the question?

Thanks
#3
Beyonwiz / Re: Blank title in timer
December 07, 2015, 09:08:15 PM
When I noticed an empty timer (no name or description) for Channel 10 3 pm today, I went to the EPG and the show name and description was there.

#4
Beyonwiz / Re: Blank title in timer
December 07, 2015, 08:27:25 PM
No, it does not like I have any recording - at least I don't see it in the list when I press "Media".

I have reloaded all IceTV timers since I have discovered the issue, so no "empty" timers at the moment. Next time I have an empty one I'll check if T4 reboot fixes that.

Thanks
#5
Beyonwiz / Re: Blank title in timer
December 07, 2015, 07:49:23 PM
1. I have noticed that I'm also experiencing "blank" timers - mostly on Monday/Channel 10. They do not get resolved automatically -  e.g. today I have lost 3pm Judge Judy (the timer was pointing to this show but it didn't have a title and did not record). It is not the 1st time it i s happening.

2. Also noticed (not sure if related) - when I'm in Timer Edit/Info screen (Timers then OK on a timer entry) when I'm at 2 to fields (name and description) 2 panels appear on the left. The top one has the value for the field (e.g. text of the name or description) but the bottom one is full of "garbage" e.g. qwee1212 fjkjf83883 etc.

Would like to learn of there is a solution to 1. and if 2. is normal/related

Thanks
#6
Thanks. Message sent (via the web form) - hope someone can have a look at it. Suddenly nothing seems to be working anymore.
#7
General Discussions / Is IceTV phone support operational
November 20, 2015, 01:58:06 PM
Trying to get some support via 1300 654 803 and getting voice mails for 3 days.

Thanks
#8
Humax / Re: Recording consecutive episodes
July 16, 2013, 12:46:37 PM
Great, that is what I hope for.

Thanks
#9
Humax / Recording consecutive episodes
July 15, 2013, 03:10:08 PM
Hi all,

I have set up Humax (on 1.08.06) to record a series with 3 minutes ore- and 20 minutes post-padding. What are my chances to get the recording right if episodes are aired one after another (like a special weekend event)? Is 20 minutes of the next episode is going to be missed, because Humax still records the padding bit of the previous?

Thanks

#10
Dave was very helpful in following this through with me... not trying to substitute his knowledge, but please check if these shows are still recorded on your Humax even despite the error icon in the tv guide. If they are, you have the same issues as I do... as per advice from Dave mine has settled down after a couple of days and I don't have this problem anymore.  That is if your shows have been actually recorded despite the error. If it doesn't settle down you can just turn the error notification off (I didn't)

Apparently there is a minor bug in 1.08.06 or something like that.. but I'm just quoting Dave.
#11
Humax / Yellow triangle "Episode failed to record"
July 04, 2013, 03:55:34 PM
Hi all,

Fresh new install, Humax 1Tb model with the latest firmware (1.08.06). No previous recordings scheduled, nothing. Before leaving home this morning set up a 2.20 pm recording on some show on 7 (one episode only, from PVR screen). Checked it via the website and android app at 3 - it has Yellow triangle and error "Episode failed to record". Scheduled the 3.30 recording of another show on the GO! from the web site - the same error.

Please help!

Thanks