Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - osiris

#1
IceTV EPG Content / Re: Briz31 on IceTV
August 31, 2010, 06:17:04 PM
So nobody can answer ???
#2
I've recently upgraded firmware, reset to factory defaults, rescanned channels, re-set all the settings as required.

Logged into my Ice Interactive account and todl it to force re-sending my timer listing to my DPP2.

After about 3 hours - only 3 of my approx 20 scheduled shows - have transferred to the P2.

I've had to manually set tonight's wanted programs, from the inbuilt EPG..... not a big issue, but kinda defeats the purpose of Ice !!!

Anyone give me any insight as to what I've done wrong?  If anything?

NOTE:  yes, the network settings are correct...... if i disable, then enable, the Ice Network on the P2, it successfully does a user-id check, pings Ice & responds correctly, loads EPG data from disc, and goes thru the cycle of "wait 25 mins for scheduled tasks".... etc... etc... in intervals of 5 minutes..... but the additional tasks just don't ever get sent to the machine.

And yes, i've checked that my Ice Interactive account actually has shows coming up in the next 7 days, so there is definitely timers upcoming in Interactive, that aren't transferring to the P2 itself.

Reminder:  It has successfully d/loaded tomorrows 3 timers correctly..... just nothing else for today, or beyond tomorrow !!!

I remember I had this issue when I first subscribed to Ice.... but cannot remember what the solution was.

STUMPED !!!
#3
IceTV EPG Content / Briz31 on IceTV
August 03, 2010, 11:30:37 AM
Does IceTV support Briz31 ?

I believe there is a "local" channel/service in most capital cities..... but being in Brisbane, it's called Briz31 (or Bris31)... not sure if "s" or "z"

After upgrading firmware & re-setting to factory default & re-scanning for new channels, I've found Briz31 is now in my channel listing..... but doesn't appear in Ice guide.

Any information about this would be appreciated :)
#4
Beyonwiz / Re: Padding on Beyonwiz
August 03, 2010, 09:13:26 AM
(This post Completely Re-Written)

Have taken the plunge and upgraded firmware to latest version...... done a complete re-initialise (factory reset).... rescanned all channels...... and allowed IceTV to re-send the timer settings.

Have re-set the padding to 2mins pre and 40mins post... with NONE as the priority.....

Will see how this goes for the next week or so, and see if my recordings are working with padding correctly, or not

Thanks Tony for your previous help.



One final question though....... Can anyone give a definitive answer on which of the services are identical ?

Eg:  When I performed a re-scan of all channels/services..... I ended up with 21 TV stations.  Obviously, some of these are duplicates, subject to different frequencies used in different areas of Aus.

I'm in Brisbane.  Can anyone tell me please which channel numbers/services/stations I can safely delete from my scanned channels, as they are duplicates ?

I've tried looking thru the EPG, to determine which ones are duplicates... but some of them, the EPG info is writen slightly differently, so it's not immediately clear which ones are DEFINITE duplicates.
Also..... cannot yet scan the EPG far enough in future to determine that they are in fact DUPLICATES of the same service, and not just SIMILAR services...... I've struck the issue before where 2 services can be identical for a number of days, and THEN have some different programming further down the track, so are therefore NOT duplicates, but merely similar.

I dont want to accidentally delete a service thinking it's a double-up of another, to find it was merely similar programming on some days, and entirely different programming on others.... but i also don't want to have to trawl thru 21 bloody channels when simply wanting to watch TV !!!

Is there a way I can show the EPG so that it is sorted by network ?  Rather than by channel number ?
EG:  Show all the network nine services together (Nine, Go, Nine HD), all the ABC services together (ABC News, ABC1 (i have 2 ABC1's), ABC2, ABC3) together..... SBS is worse.... SBS HD, SBS One, SBS2, 3, 4), etc, etc.
If I can get the EPG to group them by network, i can more easily check which services/numbers are duplicates, merely on a different channel number

(apologies.... i know i'm not using the "channel" "network" & "service" names correctly here........hopefully readers will get the intention of my question, even though the names i'm using are wrong)

#5
Beyonwiz / Re: Padding on Beyonwiz
August 03, 2010, 07:35:12 AM
Thanks mate..... will have a read.

My main problem is...... when using the manual EPG (before Ice subscription) I had padding set for 15 minutes after a program.... this always worked well.

Now...... with the padding set exactly the same..... but adding timers via Ice...... the padding doesn't seem to work.
A 1-hour timer records for exactly 1-hour... no padding any more.

I understand the concept of overlapping timers, and back-to-back, etc, etc.  That's all good.

Example:  Burn Notice, which starts about 1am (i think).  It's the only thing I record that starts that kind of time.  It runs for an hour.  Ice adds it automatically to start & record for 1 hour.  Post Padding set to 15 minutes ....... yet the recording ONLY runs for 1-hour, not 1:15mins, as expected.  Consequently, I miss the end of the program, as the network is NEVER on time :(
Frustrating as hell :(

I read somewhere else (can't find it now) that somebody else mentioned that the inbuilt padding options DONT work on a PVR, if the timer has been set by Ice...... not sure why.... just don't work.  I have no idea how the communication or protocols work, but perhaps Ice sends a dedicated STOP RECORDING setting, which can't be overridden by the pVR's internal timer management ?????

One thing I failed to mention:  I MAY have got it wrong, when I said I have to manually update (increase recording times) the timers AFTER Ice has synch'd to the PVR.... I'd never actually tested it properly before.
When I manually increase recording times by an extra xx-minutes..... when the PVR next synch's with Ice, Ice responds by allocating that extra recording time to the following program.
Sorry - that wasn't too clear..... i'll try to put it into english.
Example:  Program 1:  Runs 10:00pm to 11:00pm.  Recording set by Ice onto PVR.  Timer = Program A 10:00pm-11:00pm.  Duration 60mins.
I manually adjust the timer to be = Program A 10:00pm-11:15pm.  Duration 75mins.
This is all fine, and shows up in the timer list correctly.

WHEN Ice/PVR next synch...... an entry is added to my Ice Interactive showing that i've added a timer for Program B = 11:00-11:15pm Duration 15mins!!!!  This entry is duplicated in the PVR's timer listing.
It is NOT a separate timer entry.  It is an existing timer that I have manually adjusted recording time to allow for some "post-padding".

The other nite, after manually increasing recording times on something like 40 timers, to allow for some post-padding, the timer list all looked fine...... until after the next Ice-synch, when my recordings list doubled to about 80 programs.... as the adjusted times were re-scheduled as new-recordings.

Can anyone help further please ?  This is so f***ing frustrating.... I LOVE IceTV and the ease of use, but if it doesn't work in-conjunction-with the inbuilt padding features, then it's pointless :(
#6
Beyonwiz / Padding on Beyonwiz
August 02, 2010, 06:24:51 PM
Apologies in advance if this is the wrong place to post this question.... yes, i'm a n00bie, but willing to learn.

I've got a B/W DPP2 and when I used to manually set timers from the inbuilt EPG, I had padding enabled, both pre & post..... as we all know, the networks NEVER keep to their scheduled times.

This generally worked very well.

Now I have an IceTV subscription, and I am LOVING the service.....

BUT

IceTV doesn't seem to support the inbuilt padding ?

Couple of quick questions ?

*  If I make a recording setting using IceTV interactive, when it sends through to the PVR, it sets it for the exact scheduled start/stop times (with an effective "program length" time in the timer list).  But this seems to override the inbuilt padding I've got set in the PVR's main settings ?????  Some of my recordings are not finishing correctly, as they simply stop at the allocated time.
*  How do I force the IceTV-recordings to use the inbuilt padding on the PVR?
*  Is there advanced recording settings in IceTV Interactive (if so, I haven't found them) where I can adjust the Ice timer settings to include padding ?
I've noticed in other threads people talking about advanced settings, adding xxx-minutes to timers, but this seems to be only when using Ice on a Windows Media Centre ???  Or am I misreading this?
*  Currently, I go into the PVR timer listing every evening and manually increase each recording time by 15 minutes or so, to effectively add a degree of padding.  This is VERY tedious and annoying.
*  If I do this, the next time the PVR synchronises with IceTV, the settings revert back to the standard program length, and any manually-set increases are wiped out.  So I must go in EVERY night and manually adjust ONLY the recordings for that nite.... and hope that it doesn't re-synch with IceTV during the night, and re-set my manually-adjusted timers again before they start that evening.

Any help (or pointing to other posts with the answers, as I DID search, but could not find exact answers) are appreciated.

Cheers,
Osiris
(Brisbane)