Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - alect

#1
Quote from: ozbear on December 09, 2016, 11:04:07 AM
I hadn't done a channel scan for some time, and after getting the email from IceTV about the new ABC HD channel I thought I should. Note, that ABC HD had automagically appeared in my Guide listings prior to the scan, but I thought I should "just in case".
So I did a complete new scan, not "scan for additional channels", and all was well (38 channels found), or so I thought, until I noticed all the channel 7 channels (7, 70, 71, etc.) had no guide data.  I went to Edit Channels and saw that the Logical Channel Numbers (LCNs) were in the 200 range, channel 7 being 202 (I think, and so forth).  After changing these to the correct LCNs, the various 7x-ICE listings were available, the guide listings/logos appeared, and recordings rescheduled for those channels.

I've never seen this happen before.  Anyone have a clue?

The tuners are 1 Hauppauge WinTVHVR-2200 (dual tuners on the card) and one HDHomeRun (actually rebadged Kaiser-Bass, HDHR3-AU I believe) 2 tuner network tuner.

Oz

I just noticed I am experiencing the same problem....about to read the knowledgebase article - hope it resolves it - did it resolve it for you?
#2
IceTV EPG Content / Seven LCNs screwed up - Win7 MC
January 03, 2017, 06:27:18 PM
Hi

I've been a long time IceTV user on Windows 7 Media Centre.  As of about Xmas my recordings have stopped appearing in MC - trying to get this fixed with support (have already tried uninstalling and reinstalling IceTV exe, to no effect).

I just went and rescanned my guide in MC because the Seven channels weren't coming up.  The scan now shows them at 202-205 LCN instead of 7, 70, 71, 72 etc.... 

In IceTv guide they still show as the 7, 70, 71, etc...  I am assuming that once my recordings problem is resolved this mis-alignment in LCNs is going to prevent any recordings working on any seven channel as they're different LCNs?

How do I fix this?
#3
SKIPPA / Re: Link - Notification of Failed timer
August 02, 2016, 05:45:03 PM
Quote from: Dave at IceTV on August 02, 2016, 05:25:49 PM
Clicking on a link to an episode that is in the past will open My Week instead of going directly to that episode.

If your recorder is a T series Beyonwiz and the failed timer is more than 7 days ahead clicking on that link would also open My Week as the episode doesn't exist in My Week yet.

I don't have a Beyonwiz and I am definitely clicking on an episode in the future and not the past.  And I am landing on Today's Guide (https://www.icetv.com.au/tv-guide/ ) not My Week (https://www.icetv.com.au/tv-guide/myupcomingshows ) https://www.icetv.com.au/tv-guide/
#4
SKIPPA / Re: Link - Notification of Failed timer
August 01, 2016, 02:24:10 PM
Quote from: grampus on August 01, 2016, 01:40:46 PM
Quote from: alect on August 01, 2016, 08:44:22 AM
What has happened recently to the links from "notification of failed timer" (ie when there's a conflict).  Used to be the link would take you to the specific show which has the failed timer.  Now it just takes you to the guide for that day and you have to find the failed timer to correct it....
My twopennorth.
I think its probably better to get the overview of the timers around the conflict, so one can make a valued judgement on which timers to act on

So are you saying it was changed as an "enhancement"?

I do see a longer link in the email notification (wth the search for that show) but when it resolves in the browser it just goes to my landing page of today's guide.  Is the link structure wrong and not being resolved properly?
#5
SKIPPA / Link - Notification of Failed timer
August 01, 2016, 08:44:22 AM
What has happened recently to the links from "notification of failed timer" (ie when there's a conflict).  Used to be the link would take you to the specific show which has the failed timer.  Now it just takes you to the guide for that day and you have to find the failed timer to correct it....
#6
Quote from: Dave at IceTV on February 23, 2013, 12:28:42 PM
To move ALL 'Beyonwiz' recordings to your 'Win7 Media Center' what you should have done is:

  • Change the existing Beyonwiz device to a Win7 device, and rename it.
  • Add a new Beyonwiz device.
  • Then change the selected device in the Beyonwiz IceGuide menu to the new Beyonwiz device
  • In the Win7 IceTV Interactive app select the renamed Win7 device.
  • Finally you would need to resend the recordings for the Win7 device from the TV Recorders tab in My Account, here:
    http://www.icetv.com.au/cgi-bin/webmembers.cgi?op=editSubscription

But that may no longer be an option as you already have series recordings setup for both devices. So you will need to move each recording by changing the recording device in each series recording in My Shows, on the phone app or here:
http://www.icetv.com.au/interactive/myshows

Thanks - I did thinking of just keeping the name of the device and specifying that one in the new win7 app i installed but wasn't sure whether there was a custom format for beyonwiz that would cause problems on win7...

Anyway I ended up having to go through recording by recording and switching devices in there
#7
I just switched from a beyonwiz pvr to using Win7 Media Centre.

in my icetv account all of my recording are assigned to the beyonwiz device.  I assume this is why when Icetv on MC syncs it doesn't pick up those recordings.

I don't see an easy (or any) way to move my recordings from the beyonwiz device to the Win7 device....

I don't want to recreate them all manually.
#8
So since I have a Logitech Harmony 600 which works with win mc i assume that's not an issue for me no matter which product I buy (assuming i use win mc to record and watch)?
#9
thanks for that

Am now also considering the Hauupage Novo-TD USB Dual Digital.  Is that pretty much the same as the other two or are there some advantages to it over the others?
#10
any views of how the Kaiser Baas USB Dual tuner compares to the Hauppauge NOVA-TD HD Dual TV Tuner ?

Do they integrate the same was with ice TV (via Win MC)?  Any reason to go with one v. the other or are they pretty comparable (other than price)?
#11
and given the elagto is about 3-4 times the price, is it that far a superior product in other ways?  in what ways is it better?
#12
Thanks.  I don't think we're in a low signal area and we have a decent arial on the roof.

Do the elgato tuners integrate better with iceTV than kaiser baas?

Do either of them integrate in any way with XBMC?
#13
my beyonwiz has just died and I am almost certain it's not worth trying to fix it.

I already have a win7 HTPC running XBMC (and Win MC available but I don't currently use it).

I am considering getting a Kaiser Baas Dual TV Stick as the PVR.  it seems there is some compatibility with IceTV since they co-market their two products (3 month coupons etc).

When I asked Kaiser Baas tech support they told me that Kaiser Baas does not integrate with the IceTV EPG or scheduling.  It uses Total Media to do that.

I love IceTV and don't want to pick a solution that won't work with it.  So does anyone have any experience in using IceTV with a Kaiser Baas stick/pvr?  Is there something around IceTv integration with Win Med Centre which then passes on the epg and scheduling to totalmedia/kaiser Bass?

I ideally i would like viewing to be integrated to XBMC but i can live with doing that manually/using folders for storing recording etc....
#14
General Discussions / Re: IceTV Interactive Mobile
November 13, 2009, 10:50:59 AM
Yep - followed your instructions and sure enough hitting "Search" fixed the time issue - and have closed and reopened my browser and now entering at the right point in time in the Guide.

Thanks!
#15
General Discussions / Re: IceTV Interactive Mobile
November 13, 2009, 08:59:11 AM
Quote from: Russell at IceTV on November 13, 2009, 08:34:32 AM
Hmm, strange.  I assume you're going to: m.icetv.com.au ?

Russell

Actually the bookmark I have been using is www.icetv.com.au/cgi-bin/webpimp.cgi?op=list_shows_mobile_if_logged_in

This was what the link was way back when I started using it - is this outdated now?

Have now just tried the link you posted and when I log in I see the top options selected as "Today" and "Now" and when I scroll down to the Guide the first program listed is Thurs 10pm (it's Friday 9am)??? is there a clock issue somewhere?  I know my Blackberry shows the right time.  ???