Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - warkus

#76
SKIPPA / Re: DLNA Streaming
October 02, 2015, 12:35:07 PM
Tried the zip version too, no joy. Hopefully they fix the issues soon.

As for WMP, it works and sees the Skippa fine, but by default does not support TS playback.

You can install k-lite codec pack, basic is all I put on, and this fixes that problem and they then stream fine, but seriously, why in the world would you want to use WMP, lol. I'd rather keep using Kodi.
#77
SKIPPA / Re: DLNA Streaming
October 02, 2015, 12:26:48 PM
VLC won't even see my windows home server 2011 DLNA, or any of the 4 other DLNA server setups I have on my network, yet my windows 10 PC and Kodi sees them all as do each other (devices).

It's sad but true, VLC has issues...
#78
SKIPPA / The purple / pink screen bug seen by some
October 02, 2015, 09:58:53 AM
I thought id post this here as there doesn't seem to be anything about this bug in the bug reports section.

I have seen that others have had a purple or pink screen on their unit. I have now seen this too but I think it may be a little different to what others have seen, I'm not sure so am posting here anyway in case. To me this doesn't affect my unit at all but it is kind of odd.

So I turned on the Panasonic Viera TV late last night to check something on the Skippa. Before I got a chance to turn on the Skippa itself (so it was still in standby) I noticed that the screen on the TV was actually purple.

It's a very light purple colour and does boarder on kinda pink so I can understand why some people say it's purple and others say it's pink. Either way it's there, even though at this point the Skippa unit is in standby.

So before switching on the Skippa I switched HDMI inputs on the TV to my Altech 9600 which is also currently sitting on the same TV and was also in standby. The screen for that HDMI input was black, showing no signal, just like it usually does when the unit isn't on.

So I switched back to the Skippa HDMI input and up comes the light purple screen again. Switched on the Skippa at this point and it works perfectly, the light purple screen disappears and the unit functions fine. Switching back off to standby and it was back to a normal black screen on the TV as it should be.

So somewhere between switching off and back on the TV, which was probably a couple of hours, it had gone from no output to the TV to an all-screen light purple colour output which must have actually been coming from the Skippa itself.

Again didn't affect the unit at all.

Mark
#79
SKIPPA / Re: DLNA Streaming
October 02, 2015, 02:16:39 AM
I realise your looking for a solution at any cost for VLC and I wish you all the best in the pursuit, hopefully you succeed...

Like I've already said, it's not the Skippa...

Here is just one of hundreds of examples...

https://www.reddit.com/r/windows8/comments/326qh4/upnpdlna_client_for_windows_other_than_vlc_or_kodi/

You are not alone...
#80
If I recall and I could be wrong, I think they did a review on the Beyonwiz T series, possibly a T3 and were pretty critical of that units standby consumption, but that's because it has 3 levels of operation, unlike the Skippa and I don't think they quite worked that out when they reviewed it.

It can run "on", standby or deep standby. The standby mode is similar to the Skippa where it mostly stays on and running, but the deep standby is where it pretty much shuts down and conserves power and they may not have realised it could do that in their tests.

The Skippa on the other hand has no deep standby mode so it could be an interesting review that's for sure.

Personally, I love the instant on I have to admit , i think that's worth 18w of power, lol...
#81
I will test over the weekend, I have one...

Testing by a user called Waz on whirlpool, of the Altech 9600T - which is a very similar machine to this in terms of hardware operation and also stays on 24/7 - shows virtually no change to power draw whether in standby or on mode. Around 15w give or take .05w up and down, with no change whether in standby or not.

I would wager a bet that the Skippa would be the same but is probably slightly higher power consumption, guessing around 17-18w as it has a faster CPU and wireless that the 9600T does not.

Mark
#82
Well first cab off the rank...

You may have all noticed that it stays on pretty much 24/7. If not, well it does...I recall Dave stating that it pretty much only switches off video, and I can confirm this is definitely true...

My unit was off for much of the day (standby) but it still checked the IceTV servers all day long every 10 minutes... So note that the unit doesn't have to be "on" to update recordings and EPG data etc.

More interesting I think was that I was just watching The Chase Australia on my PC streamed from my SKIPPA, which was also on at the time on live TV. I kinda forgot that I was streaming a show on my PC, and I powered off the Skippa to standby.

Now one would think that the streaming would therefore stop...

Nope, still playing fine, just finished that show and have started streaming another, the SKIPPA is still in standby...

Does the SKIPPA stay on 24/7 and only switch off video in standby mode - Confirmed!


#83
SKIPPA / Re: DLNA Streaming
October 01, 2015, 10:51:47 PM
That isn't a skippa problem, it's a VLC player problem, my understanding is there current offering (v2.2.x I think) is having major issues with network devices like upnp discovery etc...

Not sure if these issues still exist in the v3 betas that are around but anyway, perhaps check back on the VLC web site on occasion to see if v3 is out yet and try that...

Note to anyone else trying to use VLC, don't bother until that issue is fixed, at present network discovery in VLC is not working properly.

Or perhaps try an older version that may work, I don't have one lower than current version so haven't tested that theory...


Mark
#84
SKIPPA / Re: Skippa - Feedback & Questions
October 01, 2015, 09:46:58 PM
You need to put rubber feet under it...

4 times 12x12x8mm rubber feet, cheap as chips from Bunnings, it removes almost all of the micro vibrations from the unit sitting on a hard shelf. When applying the rubber feet to the base of the unit, make sure you disconnect power first before turning it over - this is because of a point you raised, ie it always runs even in standby so the hard drive will be spinning and you don't want to turn it over while its spinning, not really a good idea.

Essentially it is always on 24/7, when you put it into standby it pretty much just switches off video, that's about it... Advantage of this if you call it that is virtually instantaneous on from pressing power.

I posted about the rubber feet being missing on the unit in another thread, it is one of only 2 gripes I have with the unit, the other being the remote.

As for watching recordings on your laptop...I posted this on whirlpool, it will work for you too on your laptop...

-------------------

I'm running...
core2quad CPU 2.6ghz
8gb ram
Windows 10

Downloaded and installed Kodi 15.1
After install I ran the program
Click on videos
Then files
Then add videos
Then click browse
Then click upnp devices
Then click the skippa
Then click Raw Recorded Files (you will NOT see any recordings at this point)
Then click OK
Then click OK again on the next screen

Now the Skippa is added as a folder under "videos / files" in Kodi and is a static link, so you only need to do that above one time.

Now just click on the skippa listing, select the file you want to stream, and hey presto, full screen playback of recordings from the skippa.

Fast
In sync
Whilst it's recording 2 other shows
No noticeable performance issues at all
#85
SKIPPA / Re: Skippa not recording
October 01, 2015, 07:36:54 PM
To help you along a bit... This is what I posted on whirlpool yesterday regarding Kodi...

---------------

Running core2quad CPU 2.6ghz
8gb ram
Windows 10

Downloaded and installed Kodi 15.1
After install I ran the program
Click on videos
Then files
Then add videos
Then click browse
Then click upnp devices
Then click the skippa
Then click Raw Recorded Files
Then click OK
Then click OK again on the next screen

Now the Skippa is added as a folder under "videos / files" in Kodi and is a static link, so you only need to do that above one time.

Now just click on the skippa listing, select the file you want to stream, and hey presto, full screen playback of recordings from the skippa.

Fast
In sync
Whilst it's recording 2 other shows
No noticeable performance issues at all
#86
SKIPPA / Re: Skippa not recording
October 01, 2015, 07:01:27 PM
+1 on that Ian,

Mine is working exactly as I hoped. It's user friendly to set up, has an array of features to make it interesting, and hasn't missed a beat so far touch wood...

I'm streaming around my house using Kodi 15.1 installed on my PC and laptop, it's smooth, very fast, and in sync, and hasn't failed or dropped out once.

I can drag and drop recordings off onto my desktop within seconds, they are named as per the recordings on the box. IceTV hasn't stopped talking to my box (or the other way around) since it was turned on initially. Hasn't frozen once. No pink or purple screens. Nothing, it just works...

It's almost identical menu structure (aside from the layout of the initial options) as the Altech 9600, it's simple to use, meaning I can recommend it to people that are not techno nuts and they will be fine with it. I realise other units exist that have a lot of features and configuration like the T series wiz, but I simply cannot recommend a unit like that to people that are not technically competent as they are very complex units with a lot of options for configuration.

The catchup TV works a treat. The ad skipping I have only tested once but pretty accurate so no complaints yet...

The only 2 issues I have are the remote, but being as I use a harmony I'm not fussed at all and if I really had to I could live with it. And point 2 is the non existence of rubber feet, which in my opinion is a problem. The micro vibrations running through the case with the base of it actually sitting directly on a hard shelf is noisy at best, very annoying and at times very loud at worst. Those that can hear the unit should invest in 4 times 12x12x8mm rubber feet and pop them onto the bottom of the case, it is near silent after you do this... A couple of dollars in Bunnings if that...

Other than that I'm really happy so far and continue to play with it learning more and more all the time...

I am certainly not trying to take away from others that are actually having issues, as I do believe that some people are but fortunately at the moment I'm not having any, for now at least anyway.
#87
SKIPPA / Re: Skippa IR Remote
October 01, 2015, 05:28:35 PM
Just an FYI...

The prices are not that great, unless they are different in different states, I'm not sure...

Looking on the JBHIFI web site all I can see is...

harmony 350
Priced at $44.95 less 30% equals $34.96 according to the web
harmony 650
Priced at $89.95less 30% equals $62.96 according to the web

But yet officeworks have the harmony 650 at STANDARD PRICE of $59.98 on their web site, not on special, that's apparently their normal price... Go figure???

Anyway just thought id mention it in case anyone wants a 650... I have 3 of them in different areas and offices...not as flash as the higher end harmony units but still very good for $60.

Mark
#88
Hi Ian,

That feature is already in your IceTV account, albeit not exactly, ie it needs refinement from IceTV to make it work for this particular scenario...

At the moment you can tick the box for "Notify me if my recorders don't download EPG for a week".

So with that in place, all they have to do is change it so that it's a selectable time period, an hour, a day, a week, a month... Etc...

Then it can work for this scenario much better. With that ticked it would work now but a week is obviously way too long of a time period.

Mark
#89
SKIPPA / Re: ozskippa wiki and Skippa forum
September 26, 2015, 11:02:17 PM
yep, just to clarify I am under no false illusions that I'm going to get it an its going to be perfect and work whereas yours is not...

Never suggested that for a second so please don't think that... I know what to expect and would doubt my experience will be any different to anyone else here... It has to arrive first of all, and based on the fact that its a long weekend here id say it will be at least Tuesday before that happens.

The comments above are for Coldasice who has gone to look at the T3 Wiz, and I was merely ensuring that he/she was aware that exactly the same thing happened there...

Hundreds of machines released with very buggy software, but over time the people on the wiz forum have helped to crush a huge number of those bugs making the unit an entirely different machine to that initially released. So there is nothing to say that this cannot happen here is all I'm saying... As long as firmware development is ongoing and proactive, then things are good... If it stops, that's when things are not so good...

Time will tell.
#90
SKIPPA / Re: ozskippa wiki and Skippa forum
September 26, 2015, 10:23:14 PM
Adding to that...

Even if the Skippa is or was I should say entirely bug free, a wiki is still a fantastic idea, it's not just about bugs...

It helps people find information on the unit, how to do different things, guides, etc

Look at the oztoppy wiki that Ian references, it's a huge array of info about them, it's not just a bugs list...

Mark