Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#76
Beyonwiz / Re: Loosing ABC Recordings
March 24, 2011, 03:40:29 PM
No, I mean duplicates like you have two LCN2 channels.  2,21,22 etc are unique LCNs.
Also look for channels now at LCN350 onwards.  These indicate an issue with receiving ABC channels from multiple locations.   Perhaps the Wiz hasn't scanned the channels properly, and is adding/removing channels from the normal list with the DCM function (dynamic channel management)... a function you can actually disable in the Wiz setup menu.
By scan/rescan, I am referring to the act of going into the Wiz setup menu and scanning for channels... e.g after a factory reset, it won't have any channels in it, so you have to do a full scan.   When you upgrade to 1.05.350, you also have to do a full scan so the Wiz has a good understanding of all the broadcasted channels, so that any future channel changes by the broadcaster can be automatically added to the Wiz channel tables using the DCM function  (if you choose to leave it enabled).
Regards
#77
Daniel, that isn't my experience at all with the Beyonwiz.   It seems that ICE will reschedule the show, you get the new timer for the new schedule (in the case of a moved event), but the existing one isn't purged, and in fact, ICE then believes it to be a timer the user wants to record for the show at that timeslot, so will mark a red dot in the guide for that timeslot.

Regards
#78
Hi,
I have found there is an issue with the Android app when it comes to ICE updating the schedule.  It appears that the original item is not purged from the EPG list, and so you end up sometimes with two shows on the same channel at the same time being displayed in the app.
e.g. last night had Castaway(1974) (with the description of the 1974 TV series hehe) and Cast Away(2000) for the same timeslot ;-).
e.g. looking right now at the app, we have two Top Gears on Nine tomorrow night at 8.30pm (I have toggled between them a couple of times to try to find the difference, it isn't immediately obvious what was updated for those).

This seems to be a similar issue to ICE fixing up the schedule and not tidying up the interactive timers they sent for the old schedule (I have seen this a few times on the Beyonwiz, where, say, a show moves timeslots, ICE reschedules the timeslot, creates the new timer, but doesn't purge the old timer, and because the old timer is therefore at the same channel/time as a different show, will actually cause interactive to think that the person wants to record this different show, as indicated by a red dot in the interactive guide display).   All schedule changes should be tracked to see if any interactive timers have been created, and ensure that a purge is done of those events that are not current).

Regards
#79
Beyonwiz / Re: Loosing ABC Recordings
March 21, 2011, 10:40:08 AM
Peter, it could be the DCM in the Wiz altering the channels for ABC and "nulling" the existing timers (latest firmware feature that keeps timers rather than silently losing them when you purge channels or rescan or DCM kicks in)?
Kiwi, ensure you don't have duplicate LCN channels, perhaps your PVR is popping up the message "channel updated" when you watch ABC channels (which is DCM doing its thing... I can't remember the exact text string), and this is potentially because of duplicates or because a full rescan was not done when updated to the latest f/w so the PVR is trying to second guess why the ABC details are not quite right in its scan tables).
#80
IceTV EPG Content / Re: Repeats - Melbourne
March 15, 2011, 04:52:27 PM
I wonder if the first ep of American Dad last night was a repeat, I am positive I remember an ep where "Rollo" tried to get it on with Haley and was pushed aside when Haleys ex came back.   But the adverts for next week say something like "New F.G & New A.D followed by F.G and A.D".. so this was a bit odd to have a repeat for the first ep when the previous number of weeks it hasn't been...
#81
Beyonwiz / Re: Priority for taping multiple shows?
March 12, 2011, 01:12:53 AM
I use a priority scheme for my Topfield 5K, it works reasonably well.   You don't go and number every favourite/keyword, that is crazy.   You just start numbering the shows you would hate to miss (or would cop an ear bashing if they were missed).   Make sure you give them big priority numbers.   That is all really.   I definitely haven't numbered my 120keywords, just about 10 or so.
#82
Beyonwiz / Re: Priority for taping multiple shows?
March 11, 2011, 09:34:32 PM
I would suggest the priority be optional, if no priority set, no different action is taken.   If a number has been set, then in the case of a multiple clash (ICE need to therefore know you have 1, 2 or X tuners, or use the exclamation for non-set timers when the PVR next responds... assuming it does.. Topfield, yes, I am talking about your pathetic ICE effort!!),  if a timer has a greater priority number than another, ditch the lower one, if less, ditch the higher one of course, and if the same, leave as is (i.e. current solution of "tough t*tties, you only have 2 tuners, but we have scheduled 3 timers, so you lose one of them").
#83
Topfield / Re: Program Recordings
March 06, 2011, 02:35:45 PM
did you see why it matched, e.g. you might  have a keyword setup to match in the title or description.
#84
Beyonwiz / Re: Schedule Updated Infrequently
March 05, 2011, 02:10:40 PM
It is a bit strange what you mention, but the guide isn't very "fluid" anyway, I would say ICE would be lucky to make 2 or 3 changes to the current days schedule per day (if that?).  At any time during the day while it is left on, does that update, or only on power on?
#85
This sounds like similar behaviour for the Beyonwiz, if, say you had a network issue at times and were missing getting the advanced epg. As the pvr polls for timers at a 30 min interval, and epg at a 60 min interval, and polls for timers before epg, if you had no epg at the time (the wiz  caches epg, so at least has epg on power up before the first ice poll, assuming you power it up every 5 days), the timer doesn't get a proper name, so doesn't give the recording a proper name (in the case of the wiz, it gives the timer a channel name with  leading asterix which, if there is epg at the time of recording, will give it a proper name at least).
Is your network connection 24x7? Does your unit come out of standby regularly enough to get timers &epg at least every day or so?
#86
Beyonwiz / Re: Nothing showing in Timers
March 02, 2011, 09:08:31 PM
Do you get an error message saying "invalid task" at the end of the time to get scheduler tasks (keep an eye on it when it comes).   When you make changes or do big things to the PVR (e.g. alter the clock and, say delete all the timers) it seems to confuse the ICE protocol and might take a couple of days to settle down.   Talking about clock, is your clock the correct time and date?  And your offset to GMT?
#87
IceTV EPG Content / Re: ABC Perth EPG
March 02, 2011, 07:07:22 AM
Disable DCM, perhaps you have some channel clashes and DCM is removing/adding channels in the ABC lineup and getting in a pickle.   If you are running the latest firmware, your timers should still be there, but flagged for you to edit them to point back to a known working ABC channel.   I would suggest running the latest firmware a doing a FULL channel scan, it will detect clashes and deal with them better than any of the older firmwares.
Regards
#88
Full scan, clear EPG cache, done ;-).
Ensure Eleven is on LCN 11 (will show up there when you do a full scan) and 7MATE on 73, and then the clear EPG cache and wait 30-60mins will work like a charm (assuming you don't have any LCN duplicates).
#89
IceTV EPG Content / Re: ABC Perth EPG
February 27, 2011, 11:07:37 PM
And last scan Sept 2010?  So this means your Eleven is actually on LCN12, and so you will be missing data for that also (and maybe Gem?)  Unless the Wiz DCM finally did the trick and worked for you (but I found when the Ten Network swapped LCN11 and LCN12 to introduce the new "Eleven" channel the Wiz didn't pick subtle swap up and I had to delete LCN11 & LCN12 and rescan VHF11, the frequency that the Ten network is broadcast on here).
#90
Quote from: kidhazy on February 18, 2011, 04:16:23 PM
Though in practice I very rarely set timers on the Topfield directly, so no big issue for me.
But think about the other ramifications of not passing info back to ICE... they won't know that an ICE timer has or hasn't been set, so you will not get the exclamation marks for non set timers shown (and perhaps also always have donuts for all recordings shown on ICE?)