Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#691
Maybe I am overstepping the mark a bit here as my Ice experience is Widget, Topfield 5K & Beyonwiz, but from what our experience is with the Beyonwiz, it isn't going to datafill every single channel you have scanned (for obvious reasons including memory, network bandwidth, server load etc).   If you have duplicates of channels, I would suggest deleting all channels and only scanning the best reception frequencies (there is no point having two ABC2 LCN2s from different transmitters, it will just confuse everything).
Regards
#692
Beyonwiz / Re: Interactive and DP-S1 Standby...
July 07, 2008, 12:24:22 AM
Presumably you aren't constantly adding and changing ICEguide timers?   So I have a daily wakeup timer setup for my Wiz that comes on at 4am for 15mins, this is enough for it to contact ice to see if there is any new timers for 5 or 6 days ahead (as ice tends to set timers for about up to 5days ahead).
And obviously while I am watching TV at night it will of course occassionally poll the ICE server checking for any new timers.
Regards
#693
No, I am talking about on HD.   They moved it from one timeslot to the next, but it was always on HD & SD at the beginning.   Then when they introduced that tripe L2L, they moved it to 10.30 to follow that, but on HD they put L2L then Nightline on.
#694
I think they have lost touch with what their core viewerbase used to be.   My Mum&Dad used to watch Nine news all the time, and lots of Nine shows.   Now, if you aren't a CSI fan, don't like reality slut crap (like Ladette to L) and other reality trash, then Nein mostly isn't for you.
I guess being a sci-fi nut, I was pissed off no end when they removed their much advertised Terminator TSCC from HD to make way for that Lad2L tripe.  Last night catching up on a few CSI-NY, I saw Nein are advertising a male equivalent of the slut show Ladette to Lady....(see Nein, I record your shows and still watch advertising you imbeciles). Nein, you have really lost the plot.
You read lots of little bits in various places (e.g. Peter Vogels blog here http://www.vogelross.com.au/vrblog/ but this is one of many of these types of analysis out there), where youth are switching off TV in droves, but trying to attract them back with utter tripe is alienating Neins core viewer base in my opinion.
Regards
#695
You should really get your Wiz going without ICE for a day or two to learn about its behaviours, as the majority of the "issues" you describe there are not to do with ICE.
Ok,
1.  Duplicated channels.   Depends on what you mean by "duplicated".   You may be receiving broadcasts from two towers, and getting 2 of everything, or you may be talking about all those silly extra channels most of the broadcasters send that are just redirects to their main channel.  (e.g 7 Digital, 7 digital 1, 7 digital 2 etc all redirect to the same PIDs as LCN 7).
If it is the 1st issue, I would be having a good look at which ones give you the best signal strength, and delete the others, this is per RF frequency, not per channel number (i.e you can have 4 or 5 channels broadcast by 7 on the one RF channel, keep all these).   The extra digital1/2/etc are "placeholders" for when the networks have different camera angles or whatever.   Ten did this once when digital was launched for Bathurst, but 99.999999999% of the time these are simple redirects to the main SD channel.
So... solution is to create a favourites group, and put the main channels from each broadcaster in the order you so wish into a favourites group.   Make sure you select the favourites group, and then when you channel surf with the up/down key, you will be surfing just the main channels.   I have 2,22,70,7,90,9,1,10,3,33,20 in my faves group to see both SD and HD channels.     The EPG shown when hitting the guide key will then be in the order of your faves group, so no more blank junk.

2. definitely get your clock and timezone setup right, many things depend on this being setup properly.   You will probably need to delete any timers and clear down the ICEGuide cache once you have done this to ensure everything is related to adelaide time.

3.  That is related to 1.

4.  ICEGuide is can sometimes be inaccurate, especially after the silly Nein lawsuits for copyright, and esp when the Networks keep changing their mind what they want to put on on the weekends especially.  The Ten guide for last night was really screwed, as Ten altered their schedule during the week.   Last night had Psych & a completely different movie showing on ICEguide, but Ten put on a 9/11 special (even though last week they were proudly introducing the new Psych series...grrr... I like Psych too).

5.  Dunno about that one.   YOu have to make sure any change you make in iceguide is uploaded to the wiz by waiting a while, if you try to make too many changes at once things get quite messy and out of synch.

REgards
#696
IceTV EPG Content / Re: Kids' Cartoon Hosting
June 26, 2008, 02:58:23 PM
You see the problem, the stuff is on Nein.    Read the few dozen other messages and the News message about the court case where Nein has been putting ICE thru the ringer for adjusting the inconsistencies in their guide by observing online guide information.   So now all Nein info is determined thru non-silly-copyright infringing methods. 
#697
Series recording is 5days in advance, so be patient for just one more day, and I tend to find EPG is typically 6-7days ahead only, I guess it depends on the time of day you download and the time of day ICE upload a bit also.
#698
Part1 was 2hours last night after 45mins (60 Minutes).
#699
Bugger bugger bugger.   I found the screen where I could list my timer types (in "my shows"), and found I had them as first runs, but this week has rpt flags, so mystery solved.   It is a shame that both the Widget and Guide webpage don't give you any kind of failure reason or whatever when you try to schedule the recording however (or retry getting it created!).   And it doesn't want to honour the "record" option anyway (although it would be nice when "record" is pressed in the guide view that it provides all the options for changing recording prefs as per the "my shows" screen, this would have highlighted the issue of repeat vs 1st run).
(This was also why Red Dwarf didn't have the timers created, but ABC2 is still showing "new" episodes of Red Dwarf on Monday nights, and "repeats" on the weekend... but I think I had problems trying to convince ICE to create timers for them just on Monday for repeats and first runs when it already had a series setup).
Cheers
#700
Ok, I am having this quirk again, in the past I didn't care much about it, as I was only mucking about setting a timer for a show I knew my 5K was recording fine (Red Dwarf), but for some reason the ICETV widget and Web is playing silly games for my "Scrapheap Challenge" timers all of a sudden.    Everything has been going fine for the past 3 or 4 weeks, and I noticed my Sunday ScrapHeap wasn't on the Beyonwiz HDD (was it on yesterday, I couldn't find it in the guide with a quick look?).   But there is no timers for this week either, but there are clearly eps on all week.   The widget is also not showing any red dots.    When I click the widget and choose "record series" for both first runs & repeats, a spinning status icon spins for a bit, then nothing (where as normally a red dot would show reasonably quickly).
So off to the webpage I go to try setting it there.
Looking at the entries, something is strange.   There is no red dot, there is the typical "favourite" icon (where as there is no fave icon for the widget for some reason??), and it doesn't give me series recording options for the show (it has a record option however):  see http://tonyspage.abock.de/beyonwiz/iceprobs1.PNG
If I choose the record option, it doesn't bring up any series recording options, but does immediately take me back to the guide with an open red dot.   But if I refresh the guide page (well, go to say, my shows, then back to the TV guide), the red dot is gone and there is no timers on the Beyonwiz to be found.
So why does ICE think a series recording is setup for Scrapheap, but then doesn't do anything about it?
Like I said, I have had this issue more than once in the past with other shows and it was a real pain to solve, I think I ended up having to cancel all series recording for that, cancel the favourite, WAIT (not waiting gave me some kind of other grief if I remember correctly, possibly due to the poor polling frequency allowed to the Beyonwiz to check the cancellation has updated) then setup the favourite and series recording all over again.

But if I wasn't checking, I wouldn't have noticed that ICE seems to have lost the plot here?    I could never get it to record Red Dwarf properly once ABC2 started putting it on the weekends also (and/or ICE started putting repeat tags on the Monday episode which isn't really a repeat on ABC2), and never bothered to persue too much as PerlTGD does a fine job on the 5K for this.

Regards
Tony
#701
You say you are an engineer, but an engineer would think about the pros & cons and all possible options, and provide a well thought out paragraph with some possible suggestions.    I kind of read from you "I want I want" with seemingly no real thought in how it would be possible to achieve it?
Regards
#702
Oh man, please don't tell me it is so!?   Bones has only just started the new season, and the HD images are really superb for that show!   Nein did the same thing for "Terminator TSCC" getting rid of a really good HD show and only showing it on SD... grrr...
So first it is Ten with quite high quality HD Letterman (ok, so it is only a studio show), then Nein, now 7... HD is really going to the pits in this country.
Of course I retract 1/2 of this if there is a guide error only :-)
#703
Quote from: alland on May 20, 2008, 11:44:37 PM
Not a worry, I suppose I don't like "settling" when it is possible to go better. If you are all OK with 99% (your percentages, I have found much less), then who am I to strive for the best possible.
Again, I have to ask, how to expect this to be solved? Some other countries (I will use that again) do actually broadcast transition information between shows (a TRUE now&next flag really), and so this could be used to trigger accurate recording, but Australian broadcasters do not broadcast ANY ways of detecting a show transition.   The only accurate way of ensuring "to the nearest 10seconds" of recording a show is to be watching the channel at the time.   I see ICE currently supports 12 regions around the country with approx 12 channels per region, so do the maths and understand what a mammoth effort it would be to coordinate and employ people in every region to do something as mundane as watch some of the garbage we get dumped with 24x7 and press a button when a show finishes/starts on every channel!

Ok, so maybe you are proposing for some smart system to investigate the MPEG video frames, take captures, and work out when a new show has started perhaps?   More feasible than having dozens of monkeys around the country press buttons, and possibly can be remotely managed (12 STBs with extra software and a LAN connection per region and/or one STB that can scan all channels quickly), but what methods could be used to detect a show change when all shows start and end quite differently?    Look at some of the advert detection software out there for "downloading a recording from a digital source, detecting adverts and cutting", even that gets it wrong enough to be a pain to use, and that also has the benefit of hindsight and post processing, i.e. not doing it in real time.

What is your proposal for a better solution other than padding and asking 144 people around the country to watch TV 24x7?
Regards
#704
Alland, I am not quite sure what your aversion to padding is, but having used an automated timer system for nearly 4 years now on my Topfield 5K, and now in the last few weeks IceTV Remote on the Beyonwiz, padding gets you out of 99% of situations.  Sure, for the 5K we had more flexible padding options (thanks to the guy that coded the PC software to upload the timers) that would pad more for certain timeslots (networks really don't keep to schedule after midnight) and look for proceeding keywords like "big brother" to enable you to add extra padding during those silly overruns, but I have rarely missed a minute of any show with just the basic rules of 3mins pre, 15 to 20mins post padding.
I find it a bit silly that you think that there is going to be an Ice person sitting in every broadcast zone watching every channel available and pressing a button when the networks decide to transition the program to the next slot, 24x7.    As far as I can tell, ICE make a fair amount of effort to get scheduling changes incorporated into the guide, but they can't account for that Eddie McGuire is gas bagging for 10mins more than he should... (etc.)

The system works a lot better in other countries because they are more legislated to follow their published guides..   for us Aussies, we can solve the problem with padding.    For the Topfield 5K and now Beyonwiz, it is a piece of cake to top and tail the recording to remove the excess bits if you want to keep something and/or reduce the disc space usage.
Regards
Regards
#705
Go into Wiz settings menu, set pre and post padding.   Done.
Priority is best left at "none" if you don't want the padding from a timer eating into a real timer time if there is conflict.   There is a plenty of threads on the padding and a good FAQ etc on the beyonwiz forums.
Here is the FAQ: http://www.beyonwiz.com.au/phpbb2/viewtopic.php?t=717&highlight=padding
Regards