Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#661
Those icons are described on the web site, essentially the Wiz is only allowed to poll the ICE server approx once every 30 or 40mins or so, so you need to have the Wiz switched on (obviously) and when you setup timers, wait, and wait and wait and they will show their state changed to uploaded, you can verify on the Wiz timer list.     Restarting the Wiz can fasttrack the process I suppose, but only if the speed limiting imposed by ICE allows the request from the Wiz to go thru.
Setup a daily wakup timer on the Wiz at, say, 4am (when it won't conflict with much) and this will ensure that at least once a day you will get updated timers from ICE.
Regards
#662
For AFL maybe.   But for another show that juggles between SD and HD a lot I really think it needs sorting out.   In my case this is "Dexter" and MotoGP & F1GP.  I want to record these on HD if at all possible, but in the case of Dexter 90% of the time it has been bumped to SD only so Ten can move F1/MotoGP to an earlier timeslot.   So I have to setup Dexter as "all channels", and then kill the SD timer in the case of both an SD and HD timer on at the same time.
Surely all ICE needs to do in this case is simply have a preference for "if show names are duplex cast on SD & HD, then preference is a: record the HD one only or b: record the SD one only" (or c: record both).   Bonus points to support the same for the Motor racing where the timeslot also changes a little between SD and HD :-)
Regards
#663
IceTV EPG Content / Re: The F***ing Fulfords
August 16, 2008, 07:20:54 PM
Maybe it was implying the Yanks milked the Osbournes, now we have a UK show milking the Fulfords... but my first thoughts were "oops" they got it wrong.
#664
Topfield / Re: Topfield 7100 Timer list Problem/Bug
August 16, 2008, 11:37:55 AM
Nothing has changed from the Topfield 5K days hey.   That had so many requests to fix it.   In the end, I coded around it with timer_extend to display the name as you highlighted each entry, Andy with PBK went one step further and "overlayed" the names over the top of the channel names, and finally a firmware hack came out to repoint that field to the timer name rather than channel name.
#665
General Discussions / Re: ReelTime Video on Demand
August 15, 2008, 01:39:13 PM
When was the float to get more funding about to start, when was the Nein litigation starting?
#666
Topfield / Re: Fetch Failing
August 13, 2008, 10:56:29 PM
This looks familiar, I have seen this messsage a bit with my slug when the USB goes silly between Toppie and slug (years ago mind you, I haven't had this for years)  quote: Aug 13 11:55:53 icebox kern.warn kernel: usb_control/bulk_msg: timeout
Aug 13 11:55:53 icebox kern.warn kernel: usbdevfs: USBDEVFS_BULK failed dev 7 ep 0x82 len 4096 ret -145

Did you firmware upgrade your Topfield at all?   There is a speed hack patch that makes USB transfers 50% quicker, but the puppy application and/or the icebox software will need an update to support that (I can't see from your logs if it is using puppy for transfers, I can see it uses it for determining the free space on your drive).
Actually, some 5K firmwares had some USB transfer bug fixes, but it is strange yours has been fine until now.
Do you have anything else running that is accessing the Topfield at the same time, like an ftp transfer, or toppypc or something?

If you attempt ftp transfers, also be careful to ensure your ftp package doesn't try multiple connections to the Toppy, as this does hang the USB up (needing a restart to sort out).
Regards

#667
Yeah, doing the same for Dexter, everyone raves about how good it looks in HD so doing "all channels", and then deleting the superfulous entry if it has one (when Ten shuffle it around for the F1/MotoGP it is only on the SD channel, but when it isn't shuffled around, it is simulcast on HD & SD).
Regards
#668
Granted using as many of the UI features of the phone is good, but there are "tailored" webpages to suit mobile use which work quite well, I think there was a modded toppyweb page to do the same, and of course even the ice interactive has a mobile web version also.
#669
I don't get what the iphone owners fear of webpages is about?   Toppyweb provides a webpage to set timers, the iphone provides a web browser?
I have been doing this on my N95 for a year now.
You of course have this as a potential option: http://www.topfield-australia.com.au/phpbb2/viewtopic.php?t=11431
But I can't see ICE supporting a feature that is open sourced (essentially) on the Topfield, given they don't have control on how it works?
Regards
#670
$299 from the Beyonwiz distributor (straight from the website) http://www.beyonwiz.com.au
Regards
#671
I don't have a 7100 (I have a beyonwiz) but can perhaps provide a couple of hints.
1.  The EPG interface in your PVR is the one provided by your PVR supplier, the only thing ICE does here is provides the data to fill it.
2.  For the Beyonwiz, you have to setup a "device" on the ICE webpages, and then on the Beyonwiz, make sure that you point it to that same device that you setup on the ICE site (and of course put your username & password in).
Then once you have done this, you simply, from the ICE widget or Web pages, choose shows you want to record, and after some time, it will upload to your PVR (some time being about no more than once every 30minutes or so).
Of course you can set timers from your Topfield EPG (hit the "REC" key on an EPG entry probably if it is anything like the Topfield 5K and the Beyonwiz).   But if you want to use interactive, this is done via the ICE Widget on your PC/Mac, or ICE Webpages (which are also supported on a mobile phone with web access), or Iphone application now too.
Regards
#672
ICE attempts to only show you the real HD shows (or now with 7&10 they also show the unique programming on those channels too), and this is the only HD that ABC is broadcasting at the moment.   Everything else is upscaled from SD and there is no point in recording it as it takes up more HDD space for the same quality as the SD channel.   If you don't like it like this (I certainly DO like it as I can see in a pinch when a HD show comes on, e.g the ABC Australian Parrots special in HD was amazing and I wouldn't have spotted that gem if it didn't stand out in the WIdget and Beyonwiz guide), there is an option in the ICE setup pages to copy the SD show details to the gaps in the HD channels.
Regards
#673
Wouldn't that be your ICETV username and password, which is the same one used for this forum also?   You would surely know that password as you need it to be set in your PVR/Media Centre to pick up the timers that you set from the app.
#674
Excellent update for us Daniel, thanks for that.   Now, when are we going to thank you for fixing it? :-)
#675
We are all waiting with baited breath in another thread if ICETV reschedules timers or not (specifically related to scheduling on the Beyonwiz, but we have experienced similar issues you describe here Futzle).
The ICE Interactive protocol supports deleting and maybe changing, so it should accomodate this, but I guess the issue is that once the link between EPG and Timer entry has been broken (by the EPG being rescheduled), then when ICE checks your PVR/whatever what timers you have set, it doesn't realise any more that timerX that now ICE thinks you have set for a different show is really a timer that ICE effectively has incorrectly set.    You would hope that if ICE detects a scheduling change, then anything at the old timeslot should be altered by ICE.   The Beyonwiz supports a timer name which hopefully ICE can use to realise that this is indeed the correct timer to delete/rebuild, but sometimes we will see "*Nine" in the Wiz timer list, so maybe this isn't actually the case).
Regards