Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#61
Umm.. .hahaha, as if a commercial company can record FTA TV, and sell it to people, who are you kidding really if you think there is some eutopia where that would be possible  ??? :P
#62
More than likely you have hdmi and don't have analog audio output enabled, or the mp4 contains aac audio for the sound and you forgot to set this to decode rather than passthru (most amps and tvs won't decode this so u must u decode on the wiz).
#63
1hour??  Mine is 10mins (even 5mins is enough, given as soon as the LAN is up and running, the PVR asks ICE for the latest EPG and timers).
#64
Beyonwiz / Re: Nothing but trouble
April 24, 2011, 05:14:06 PM
Yet the majority of us (Beyonwiz owners) have no problems at all... (or only small probs come daylight savings changeover time).
Have you tried posting on the Beyonwiz forums, and read thru some of the troubleshooting messages on teh Beyonwiz forums and here?
Do you have a working network?
Do you have duplicate LCN channels?
How can you expect to get help when you don't post any info about your troubles.   Your post comes across as trolling (I know you aren't as I do recall you posted a couple of messages the other day) but this kind of rant does nothing to get you help.
Regards
#65
Topfield / Re: Recording errors on the IceTV website
April 13, 2011, 10:36:33 AM
Quote from: farbar1 on April 13, 2011, 07:56:53 AM
I'd like to understand why this happens as well but there has not been a lot of response that I can see. Does nobody know?
This time of year it is because of the dst transition.Thanks to most pvrs being too stupid to add the correct gmt offset to the ice utc data, what the pvr reports back to Ice won't match what its really meant to record, so ice throws up the exclamation as it can't find the timers it asked to set when the pvr reports back next.
#66
Quote from: frankonthenet on April 04, 2011, 03:19:46 PM
Thanks for the assistance.

Device is set and same on both IceTV and PVR.
generic channel/time names.

Any other suggestions?
try creating a second device and select that one instead. Make sure you don't have duplicate lcns, make sure your clock including timezone etc are correct, make sure in your network that there is no potential of an ip clash by using dhcp or making sure all fixed ip addresses are unique.

Downloading xml to your pc doesn't prove much at all.
Ensure the wiz has a correct dns address set too.
#67
Are you sure you are seeing the Ice guide and not the fta guide? In a beyonwiz forum a Melbourne guy there posted that the time is out due to the networks stuffing up with the dst transition.
#68
I got my email 17:44 finally:)
#69
Make sure you have a device setup in ice, and when you enable Ice in the wiz, make sure you have selected that same device.
#70
I haven't received an email either,i figured it was because they knew that I knew how to deal with it:) ;D.
#71
Yeah,i have the exclamations also for esp tomorrow. The reason is because the pvr is reporting the wrong times for the entries back to ice of course,
#72
I already worked this out last year on the forums, for someone who was going on holidays around the time of the transition.
The reason is because ice tracks everything with gmt/utc, and that is how it sends the timers to the wiz. The wiz then adds the *current* gmt offset to the timer to put into the pvr timer list. So if you don't fix your clock, the timer will be at the right time, but if you fix your clock, the timer will be for one hour later than it should.
The wiz should really be dst aware using, say the tz library and both automatically adjust the dst parameter, and add the correct offset to the timers regardless of when they were sent vs when they are due to fire.
#73
Beyonwiz / Re: DP-Lite Not recording
March 31, 2011, 01:48:36 PM
Quote from: mich@el on March 31, 2011, 08:06:33 AM
7. On the IceTV site, confirmed that there were no duplicate LCN's
The duplicates I am referring to are not at ICE, they are on your PVR (if you receive two broadcasts of the same or overlapping channels for example, and end up with two ABC2 (LCN22) for example, or, in the case of newer firmware, an LCN22 and an LCN350+ both showing the same thing).
I would suggest the full rescan or the DCM disable has really done the trick, as a full rescan clears out the channels, and DCM ensures they don't dynamically alter if the box is confused (which is much more chance of happening if you receive broadcasts of the same channels for two locations for example).   

The thing is, I have never seen this in practise, but the newer firmware for the Wiz will not purge timers if they suddenly become irrelevant (e.g. you lose the LCN from the PVR the timer was set to record for when, with, say rescanning, or if you delete a channel from the PVR, or it has a DCM automated channel move action).  But the timer will have a marker or something in it that allows the end user to reset the timer to a real channel in the PVR timer list.
#74
Beyonwiz / Re: DP-Lite Not recording
March 30, 2011, 12:27:33 PM
ensure your dcm is disabled and ensure you don't have duplicate lcn's (logical channel numbers), and see how you go.
#75
Beyonwiz / Re: DP-Lite Not recording
March 29, 2011, 01:44:48 AM
And have you got any reception problems or duplicate LCN channels, and is your clock setup OK (offset to GMT set correctly etc).