Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#571
I don't get it.   The Beyonwiz EPG is very similar to that, with 6 channels showing (and 8 if you want to forego the help legend), program names showing, when highlighted, give the short event description, when info pressed, give the extended info description, highlights shows due to be recorded etc.    It even has a PIG (picture in graphic) showing the TV inside the EPG next to where the event description of the highlighted event is.
I don't know why people bag out the Wiz EPG actually (apart from it truncating the names of longer show names, but the Vista EPG appears to be doing exactly the same), it works for me (but I use ICE mostly to do the programming with the Widget typically, or if that isn't letting me do what I want...e.g. keyword stuff, use the ICE webpages).
Regards
#572
Beyonwiz / Re: EPG idle
January 25, 2009, 10:21:31 AM
Most of us put the big HDDs inside the Wiz instead (well, those that can argue the act of breaking the warranty seal to achieve this did not cause the failure of something else if we had to have a warranty claim).   It transfers at a pedestrian 3-4Megabyte/s which is only about twice the speed of a HD broadcast (well, not even that, a HD broadcast=16megabit/s=2megabyte/s).  So a 1hour HD show is going to take around 30mins to transfer.   Similar speeds for transferring to the network. 
The easiest way to transfer is to access the Wiz with WizPNP using WizFX (beyonwiz app) or getWizPNP(PRL/Peters app) etc to get the files off the wiz with no bargraph transfer display, and you can set it up to transfer overnight or whatever.    And if you copy the transferred files to a network share (or transfer them to the network share in one step) then you can play them from the Wiz that way (but transfer speeds are still a similar speed to that of transferring to the USB HDD).
Regards
#573
Beyonwiz / Re: EPG idle
January 24, 2009, 11:56:05 PM
You have the Wiz directly connected to your PC?  Wow, not a good setup for many reasons (PC firewall getting in the road, PC Internet Connection Sharing going silly, PC NIC card issues, PC needs to be on etc etc).   Can you connect the wiz to your home router (which may be your internet router too!)?
What I was saying (in a round about way) before was:
1.  You need to setup a "Device" in your ICE preferences on the ICE website.
2.  You need to make sure once you put your correct user/password details into the Wiz, that you select the device you setup in step 1. also into the Wiz.
Regards
#574
Beyonwiz / Re: EPG idle
January 24, 2009, 08:53:26 PM
Have you put your account details in the ICE setup in the Wiz and enabled ICETV?   Have you selected the device in the wiz that you have setup in the ICE account/setup webpages?
Regards
#575
Topfield / Re: TF7100 and Interactive
January 23, 2009, 10:05:20 AM
Push would never work in a NAT environment unless you open up specific ports to your Toppy in the NAT router.   The Toppy/Wiz/whatever has to poll ICE to get updates, as the act of opening up a TCP "pipe" from the unit through your NAT router to ICE over the net ensures a nailed up pipe for a bit anyway.
Don't worry, we Beyonwiz users are equally kept in the dark about how the ICE voodoo magic works, but luckily for us it tends to work (only "gotya's" is when people receive two different RF broadcasts with the same LCNs, and setup faves group with the one that the ICE data *isn't* getting loaded into.   Once we, the user community, establish with them that this is the case, a quick delete of the poorer reception channels and ICE is back and working to their good channels).
Regards
#576
IceTV EPG Content / Re: Taggart synopsis blooper
January 21, 2009, 10:54:02 AM
Bah, only the other side of the island, that funked out Range Rover should be able to get there in no time at all (when I stayed up at Loch Ness on holidays up there a few years ago, the B&B person asked "where are you off to today", I told him I had to get the car back to London, he almost fell over in shock... I don't think the Poms are used to driving 8hours between major cities like we are  :D).
#577
IceTV EPG Content / Re: Taggart synopsis blooper
January 21, 2009, 10:25:49 AM
Depends... are there any escaped American Bears running around Glasgow?  I think if one was knocking on my door, I would either get Torchwood in, or murder it myself :-)
#578
This will can that idea: http://www.ebroadcast.com.au/copyright.html
specifically:
QuoteSpecifically, each TV schedule is not to be, in any way, downloaded or used in conjunction with any software or device, such as any end-user equipment or a set top box, which permits manipulation of the program listings, or which permits scheduled program recording.
#579
All broadcasters are sent each others EPG.   EPG is (apparently, but this is part of the whole court case of Nine vs ICETV) IP and thus copyright.   Supposedly the networks (well, Nine for the court case) believe it took intelligence to come up with the scheduling and thus the time and title listing information is intellectual property and subject to copyright.   It seems strange that they don't want other companies publishing the schedule, as it works against them for people knowing what the heck is actually on, but if you read the original court proceedings that Nine took against ICE, you will see that the networks are more concerned about people skipping adverts and copying shows, and they believe that having an EPG like that provided by ICE is the vehicle to allow this to happen.   Stupid, I know, but read the court proceedings and bash your head against the wall for how stupid the whole thing sounds.
You might want to read here: http://www.itwire.com/content/view/19617/53/ to see what a community of concerned users tried to put together to rally the government etc to say that it was ridiculous for a court case like Nine vs ICE to go through and that full free access to EPG should be put in place as part of a regulation for broadcasters.   The form answers given by the pollies were garbage (see the xpmediacentre forums for some of these).

Back to yahoo7, look at the bottom of their page:
Copyright © 2009 HWW Pty Limited
Make Yahoo!7 Your Home Page | Get Yahoo!7 Toolbar with Anti-Spy
Copyright © 2009 Yahoo! Pty Limited. All rights reserved.
Advertise with Us - Privacy Policy - Terms of Service - Help

So again there is that company HWW, owned supposedly (I read it on dtvforum.info so it must be true :)) by NineMSN... HWW own the only EPG distribution out there directly associated with the broadcasters, and they will not license it to anyone they feel will compete with them in any way.

Here, read what HWW says:
http://www.hww.com.au/syndication/tv/index.cfm?action=copyright
Also on the corporate info on HWW web (in the news section):
3 April 2006
Ninemsn acquires HWW

It might not make sense that yahoo7 uses HWW info when HWW is owned by NineMSN, but this is how it is in this dirty world we call "business" (and even dirtier to have all sorts of silly copyright/IP garbage surrounding it).
Regards
#580
I assume you never followed any of the details of the whole EPG debacle?   NineMSN owns the company that supplies the EPG data to all those websites and newspapers (HWW).  They do license it, but speculation is that they refused to license to ICETV.   
Give this a go, a lot of good info:
http://www.google.com.au/search?q=site%3Adtvforum.info+Nine+yourtv+EPG+hww

(It looks like HWW owns yourtv actually too, read the copyright message and follow the corporate spiel from there).
Regards
#581
Sounds like you have setup the padding priority to something, and this takes precedence over the real start/end times of a timer.   Most of us have it set to none.
You can't use the second tuner for a recording starting on the same channel.   With the padding priority set to none, the transition from one file to the next is at the unpadded scheduled start/end time (which typically means a minute or two of the end of the 1st show is on the beginning of the second show).   Luckily there is only a second or so of missing show, and now you can setup the sort order to be the opposite way, if you are watching the saved file it will quickly transition to the correct next file with only a brief interruption (just don't forget the end of a show is at the beginning of something else and delete it before you watch it!  Another trick I use for shows like this when I watch the second one first is once I have finished watching it, I trim it down to just have the few minutes of the previous show saved in it). 
There is a small trick of recording one show in SD and one in HD, and effectively the Wiz treats this like 2 tuners with independent recordings and the soft padding included in both.
#582
All ICE interactive recordings are sent as single recordings.   Otherwise you would get into strife if the show changes timeslots (clashing timers with itself).   You must leave your Wiz connected to the net for the timers to update, and you still won't miss it.
Regards
#583
Beyonwiz / Re: IceTV EPG Vs Beyonwiz EPG Override
January 12, 2009, 06:21:35 PM
The Beyonwiz pre/post padding is a "soft" padding, i.e. it doesn't add the time to the timers, but instead for ALL timers, will (try) to honour the padding time setup.   So ICE vs EPG vs setting from the timer setup screen makes no difference.   The padding is not shown on the timer, it instead "fires it up early" and "records for the post padding extra" on any timer.
Regards
#584
I use both the web and widget.   It is just easier to spot the red blobs in the widget as it is always running on my PC.   I am not sure now whether the widget shows any red blobs if it is a keyword search (which can't be done from the widget mind you), but I think it should definitely be indicating a show is going to be recorded to avoid confusion (the wiz actually had my timer uploaded, so my issue could simply be widget not showing keyword search and not really the "ICE fails to upload timers or indicate entry recording in web/widget" issue this thread describes).
Regards
#585
Same thing tonight for "The Office" for me, on TenHD??   The Widget doesn't even think I have a series recording for it (hmm, maybe I did a keyword search because of Ten chopping and changing this between SD and HD all the time in 2008??)
edit:
Yep, just checked.  I set this one up as a keyword record, and the widget doesn't indicate this is recording?
Regards